I discovered Toneboosters a while ago, and they're one of my favourite companies. Love Morphit, it's the first of their plugins I've bought (and there will be more) I didn't know that the founder is now Australian based (and not so far from me) that's brilliant!
Morphit, what a lifesaver! It takes these nigh-useless mistake of a purchase AKG72 headphones and turns them into a decent option for mixing. The quality-to-cost ratio on Toneboosters' plug-ins is wild - the Multiband Compressor and Reelbus are another couple favourites of mine. Izotope this, Waves that, Toneboosters is underrated, just like this channel.
The Toneboosters plugins are gorgeous. Have tried a few, and, more important, they work beautifully. Especially liking the Barricade TP limiter. If I could go back to when I started out, I'd advise my younger, more handsome self to buy these and avoid the skeuomorphic emulations that I've spent a fortune on over the years. They work extremely well, visualize beautifully, and, just wow. They easily challenge Fabfilter for my desert island plugin suite. And they're also generally surround compatible. Amazeballs.
Okay I noticed when you turn the limiter off on Morphit it sounds better than when turnt on? Should I leave the limiter on in morphit or off? Using audio technica m50x, appreciated for another great video
Hey there. Thanks! I should’ve said something about that. I left it on only because I thought as I toggle through presets I might peak out. So I left it on most of the time. Whatever you think sounds best for you, do it. For me? I’d leave it off. Hope this helps!
Hey there. Well, this is meant to sit on your master bus after every other plugin. It’s the last in the chain and should be disabled when bouncing or rendering out your final product. In Studio one there’s a “post” section just under the master bus. This is where I put mine. It won’t be included when I bounce out. If you’re not recording or bouncing out but use it to balance your headphones for listening, then the same thing applies: last in the chain.
After the hyperdrive motivator has been damaged, Han Solo thought he would fix it with toneboosters or alluvial dampers. But he ended up using a hydrospanner - I don't know how he got out on this one. What, no Roland headphones?! Pff, clearly the plug-in is not fully developed. But speaking of headphones, as I was rummaging through your videos, good Sir - there does not appear to be The Time Preservation Society's guide to headphone selection for the purposes of audio acquisition. I was wondering if you would like to embark on such a project. I am certain there would be at least two, if not three, of us who would rather watch such a video than actually get out there in the field to record some new shit. What do you say?
Hahaha. Awesome! Yes. The problem is all of these videos take me a long time to make. Getting out there are doing some actual in-the-field field recording is harder. I’d have to take some time off to do that. But I’ll try my best! Cheers!
What happens if they don't have my headphones listed? It's puzzling why they haven't included a feature to measure headphones, so one can understand the frequency response curve. Maybe in some countries people are using different headphones, it's not like everyone in the world have the same standards. I use some AKG knockoffs named ISK or something. Because they cost me the same price as you would pay for original model of AKG but in my country is double the price. And all of this is happening because the USA is helping with guns and wars. So they can have a good life, while the poor countries getting destroyed and their people become modern slaves. The USA never abandoned slavery, just changed place and definition.
I discovered Toneboosters a while ago, and they're one of my favourite companies. Love Morphit, it's the first of their plugins I've bought (and there will be more)
I didn't know that the founder is now Australian based (and not so far from me) that's brilliant!
Woo hoo! Great products!
Just downloded Morphit and tested it with Audacity and my AudioTechnica M20x and they sound great.
Fantastic!
Morphit, what a lifesaver! It takes these nigh-useless mistake of a purchase AKG72 headphones and turns them into a decent option for mixing. The quality-to-cost ratio on Toneboosters' plug-ins is wild - the Multiband Compressor and Reelbus are another couple favourites of mine. Izotope this, Waves that, Toneboosters is underrated, just like this channel.
Hey thanks so much for saying that! And you’re very right! Toneboosters is so completely underrated!
The Toneboosters plugins are gorgeous. Have tried a few, and, more important, they work beautifully. Especially liking the Barricade TP limiter. If I could go back to when I started out, I'd advise my younger, more handsome self to buy these and avoid the skeuomorphic emulations that I've spent a fortune on over the years. They work extremely well, visualize beautifully, and, just wow. They easily challenge Fabfilter for my desert island plugin suite. And they're also generally surround compatible. Amazeballs.
I couldn’t agree more! Well said!
I will absolutely be checking out Toneboosters! Thank you for introducing me.
Excellent! And no worries!
Always happy to see a fellow Studio One user. Thanks for the recommendation, I'll check out ToneBoosters 👍
Of course! Cheers!
When there’s something strange happening in your headphones.
Who ya gonna call?
Toneboosters!
Hahahaha. What did you do, Ray??
Awesome recommendation! I've gotta check this out. Thanks, Nathan!
You got it, buddy! ❤️
You sold me on this one! Gonna check it out 🙂
Excellent!
Toneboosters has awesome plugins. I have been using them for a couple of years.
Oh that’s great!
I’m a big fan of morphit.
I use it everyday
Awesome! Great plugin!
Okay I noticed when you turn the limiter off on Morphit it sounds better than when turnt on? Should I leave the limiter on in morphit or off? Using audio technica m50x, appreciated for another great video
Hey there. Thanks! I should’ve said something about that. I left it on only because I thought as I toggle through presets I might peak out. So I left it on most of the time.
Whatever you think sounds best for you, do it. For me? I’d leave it off.
Hope this helps!
Does the tool take into account your audio chain, or just the headphone themselves? i.e. my dac/amp stack.
Hey there. Well, this is meant to sit on your master bus after every other plugin. It’s the last in the chain and should be disabled when bouncing or rendering out your final product.
In Studio one there’s a “post” section just under the master bus. This is where I put mine. It won’t be included when I bounce out.
If you’re not recording or bouncing out but use it to balance your headphones for listening, then the same thing applies: last in the chain.
@TheRecordist 10-4, thanks!
After the hyperdrive motivator has been damaged, Han Solo thought he would fix it with toneboosters or alluvial dampers. But he ended up using a hydrospanner - I don't know how he got out on this one.
What, no Roland headphones?! Pff, clearly the plug-in is not fully developed.
But speaking of headphones, as I was rummaging through your videos, good Sir - there does not appear to be The Time Preservation Society's guide to headphone selection for the purposes of audio acquisition. I was wondering if you would like to embark on such a project. I am certain there would be at least two, if not three, of us who would rather watch such a video than actually get out there in the field to record some new shit. What do you say?
Hahaha. Awesome!
Yes. The problem is all of these videos take me a long time to make. Getting out there are doing some actual in-the-field field recording is harder. I’d have to take some time off to do that.
But I’ll try my best! Cheers!
I agree! I’d watch that video!! 🎧🎧🎧
They make very good plugins!
They sure do!
Nice!! Toneboosters is my shiiiiiiiii ❤
Woo hoo!
Sold kerchiiiing !!!
Bam! 💥
Looks like they cover most of them, except mine 😂I'll check out their others
Oh really? Which ones do you have? I’ll let them know to add it.
@@TheRecordist Ultrasone HFI580. I also have the 780's, though mainly use the 580's.
@@oldman1517 ahh. Roger that! I just emailed Jeroen and told him about your request. Cheers!
What happens if they don't have my headphones listed? It's puzzling why they haven't included a feature to measure headphones, so one can understand the frequency response curve. Maybe in some countries people are using different headphones, it's not like everyone in the world have the same standards. I use some AKG knockoffs named ISK or something. Because they cost me the same price as you would pay for original model of AKG but in my country is double the price. And all of this is happening because the USA is helping with guns and wars. So they can have a good life, while the poor countries getting destroyed and their people become modern slaves. The USA never abandoned slavery, just changed place and definition.
Oh man. I’m so sorry to hear that. I wish you good luck, my friend! Cheers from Canada! 🇨🇦
The tape measure "rules".
Hahahahaa
It's pronounced "yeroon", as in "noon".
Oh. Thank you very much!