I bought a bunch of these cabinets and workbenches directly from the Seville distributors in Torrence CA. Being in northern CA, I received them within 3 days. No shipping damage due to the more than adequate packing. These are high quality, and have a surprisingly high weight capacity. I would definitely recommend all of their products.
Dang, had to adjust my drawers this morning so they wouldn't fall off! All kidding aside, those garage cabinets are the bomb, and a great deal for the $$$ paid for the set! Your workshop is looking great now! Thanks man!
Glad to hear you are recycling. Save some of your plastic bags to cover tools with to keep out the dust and moisture. Save some big cardboard pieces to lay on and to put under things for oil drips.
Looks great and very nice setup. I would put the smaller cabinets on both sides of the bench and the taller ones on the very outside. Love the attention to details ... keep up the good work.
nice setup they look great ......what about doing the epoxy floor coating i think it would really change the look and make it look bigger..?..where did u get the garage opener..?..
Looking good Jon! Maybe put one of the shorter ones on the right side to balance out the look. It would create a small storage space between the tall cabinet and the shop wall.
Thanks man! Yeah I’ll play around with the layout a bit. Nice thing about these is they are expandable and I can purchase upper cabinets for the short ones too
I have two of the Lift Master openers, it sounds like yours is straining a little. Mine did also at first, until I adjusted the springs. I would not recommend doing this without research first though... Awesome video on the cabinets!
Are the shelves adjustable on the cabinet that came with wheels? Wondering if I’m the bigger section at the bottom right would fit gallon containers of paint
Thanks for showing how the inserts work, I was considering doing something similar. Is it how thick does that part of the metal have to be in order to hold onto the thread properly?
My opinion on the setup (partially due to OCD) I would put the bench top in the middle then shorter cabinets on either side, then tallest cabinets on the outside.
So pretty much the setup picture you see when you go to Sam's club website except the two shorter cabinets on either side of the workbench then you can have the three cupboards up top and then possibly get two more of the uppers that would go on either side of those 3 for a total of 5. Then you would have uppers that run all the way across the middle from one tallest cabinet to the other. That's if the dimensions work out right
So my math says adding 2 wall cabinets on either side of the 3 would make the row of wall cabinets 48"wider almost spanning the distance from one tallest cabinet to the other. They would then be above the shorter cabinets and the work bench. I wish I could submit a drawing!
what size rivserts did you use?? it says you used 8mm?? when you access Amazon, but doesn't the cabinet use inch bolts? (SAE) ? and how "floppy" are the doors of the larger cabinets.
So I got a 1992 dodge d150 with the 5.2 and I need to change the spark plugs and injectors idk how to pull them out without the fear of them snapping know how to pull them out?
You need a matching garage refrigerator!Cabinets look great.Some guy tried to scam me claiming he was you and giving me a pressure washer but I knew it wasn't legit.
If I were you, I would move the shorter cabinets over and put your toolbox in between those and the taller cabinet. Then just move one of your storage racks elsewhere
I bought a bunch of these cabinets and workbenches directly from the Seville distributors in Torrence CA. Being in northern CA, I received them within 3 days. No shipping damage due to the more than adequate packing. These are high quality, and have a surprisingly high weight capacity. I would definitely recommend all of their products.
Shop Looking Good 👍
Thanks clay! Just trying to keep up with yours 😁
I need to pick up a couple of those garage door openers.
Wow, that's looks super sweet, also I just purchased the nutsert thru ur link and gave me 10% off as well. Thanks for the deal......need more...🍻.lol
This video taught me how to insert a nutsert without me looking up “how to install a nutsert”
Ayeeee 😂🤘💪
Dang, had to adjust my drawers this morning so they wouldn't fall off!
All kidding aside, those garage cabinets are the bomb, and a great deal for the $$$ paid for the set! Your workshop is looking great now! Thanks man!
I would leave it like that and just raise the banners looks awesome bro 👌🏾
I have thae same big rolling cabinet, and i love it....have it loaded with tools and its held up really well
Glad to hear you are recycling. Save some of your plastic bags to cover tools with to keep out the dust and moisture. Save some big cardboard pieces to lay on and to put under things for oil drips.
Bro...have you been to South East Asia? 3/4 of the world throws their trash in the Ocean.
Loving seeing those cabinets stuffed with goodies for working on the cars and other things it’s looking amazing John!!!!
Ok the cabinets are cool especially for the $$, but damn I'm sold on that garage door opener!!
Looks great and very nice setup. I would put the smaller cabinets on both sides of the bench and the taller ones on the very outside. Love the attention to details ... keep up the good work.
Yeah few people said that too I’m going to try itn
#BSTEDMTRSPRTS headquarters is looking good John love it man 👌🏽
nice setup they look great ......what about doing the epoxy floor coating i think it would really change the look and make it look bigger..?..where did u get the garage opener..?..
Loved the video!! you always go over the details that everyone else misses. Love the attention to detail!
Thanks brother I appreciate it!
Cool cabinets! It's up to you how you want them. They are your equipment not ours. Looks great.
Awesome!!!! Do you have photos of the overhead comments installed between them?
Looks so good ! 🔥💪🏻🏁 Dude put some led clear lights on the bottoms
Thanks brother! Haha dang you want me to put under glow on these thangs? 😁
Daaaaaang dude,it looks absolutely awesome 👌
Looking good Jon! Maybe put one of the shorter ones on the right side to balance out the look. It would create a small storage space between the tall cabinet and the shop wall.
Thanks man! Yeah I’ll play around with the layout a bit. Nice thing about these is they are expandable and I can purchase upper cabinets for the short ones too
I have two of the Lift Master openers, it sounds like yours is straining a little. Mine did also at first, until I adjusted the springs. I would not recommend doing this without research first though... Awesome video on the cabinets!
Looks awesome!
Thanks Joe! 💪🤘
Are the shelves adjustable on the cabinet that came with wheels? Wondering if I’m the bigger section at the bottom right would fit gallon containers of paint
I have these too. The products all have shelves that are adjustable, and you can order additional shelves as well.
Thanks for showing how the inserts work, I was considering doing something similar. Is it how thick does that part of the metal have to be in order to hold onto the thread properly?
My opinion on the setup (partially due to OCD) I would put the bench top in the middle then shorter cabinets on either side, then tallest cabinets on the outside.
So pretty much the setup picture you see when you go to Sam's club website except the two shorter cabinets on either side of the workbench then you can have the three cupboards up top and then possibly get two more of the uppers that would go on either side of those 3 for a total of 5.
Then you would have uppers that run all the way across the middle from one tallest cabinet to the other.
That's if the dimensions work out right
So my math says adding 2 wall cabinets on either side of the 3 would make the row of wall cabinets 48"wider almost spanning the distance from one tallest cabinet to the other.
They would then be above the shorter cabinets and the work bench.
I wish I could submit a drawing!
Send a sketch on Instagram or Facebook 💪
@@BoostedMotorsports will do
So I haven't used Instagram forever but I think I got it I posted it on my page and then I tagged you
nice! clean as always. I'm sure the equivalent in the great white north would be in 3 grand land 😢
Probably!
what size rivserts did you use??
it says you used 8mm?? when you access Amazon, but doesn't the cabinet use inch bolts? (SAE) ?
and how "floppy" are the doors of the larger cabinets.
So I got a 1992 dodge d150 with the 5.2 and I need to change the spark plugs and injectors idk how to pull them out without the fear of them snapping know how to pull them out?
great setup....what is your wish for next in this brand?? you are taking to the designer...thanks for your support...✌
I’d love to get some more and feature them on the channel if you can send me some more that will do with this garage setup 👍
Looks really cool.
Thumbs UP>!
Very cool. Great layout. Definitely going to check these out. I need a better system to organize my area.
What size is your garage?
What size are these cabinets? The 36” or the 48”?
Did you order online? They want $900 to ship it and im right down the street from a sams club but pickup at store is not an option.
What brand/model is the garage motor
You need a matching garage refrigerator!Cabinets look great.Some guy tried to scam me claiming he was you and giving me a pressure washer but I knew it wasn't legit.
Man a free pressure washer would be cool! 😂
Put one of the shorter ones on each side. Would look more symmetrical to me
Ditch the elbow on the shorter door. Just make it go straight up against the wall.
Id prob do stair steps with them but this is your garage . two taller on the outside ,medium , the the worktop
It's perfect
Thank you! Really liking how it turned out!
Ball bearing drawers…?
I helped a buddy build 10 of them. They are nice for the price but after that day ordered newage so I didn’t have to build anything…haha
I don’t blame ya it took forever building them but was pretty rewarding when finished and for the price I can’t complain!
If I were you, I would move the shorter cabinets over and put your toolbox in between those and the taller cabinet. Then just move one of your storage racks elsewhere
just wish the cabinets were darker.
$120 shipped for 8 Seville casters, bolt right on 🤷♂️
And a 2-3 week delivery time to ship them. Didn’t want to wait that long
@@BoostedMotorsports yeah that’s not happening 👍🏻
I’ve got the same cabinets in my garage. I’m happy with them.
Pretty Trick Jon!!! Now go wash your hands and go get some Mcnuggies
Walmart 💪
HELL YEAH BROTHER...
THAT'S what I'm talking about...
🤔🚫🧢💯💪🎬🚛☁️🚛☁️🛻☁️🚐☁️🚐☁️
#BOOSTEDMOTORSPORTS #HELLKOTA #HELLRAM #CHICKENNUGGIES #MCDODGES #HELLCATSWAPTHEWORLD
🤔🚫🧢💯💪