Nice channel! In my case the gearbox fillerplugvdidn’t came loose at all. We tried everything and ended with replacing the gearbox! I am glad for you is was going well. Nice vid man.
The R1150 gs is a great bike. Video is great. I used your guides on the abs etc many times. I have a 2010 R1200 gsa with a partially blocked fuel filter. It seams the only way to solve the problem is to reserve flush them. Do you have any ideas?
Clear, concise, and easily understandable....... Best I've seen.... thankew2much
Nice channel!
In my case the gearbox fillerplugvdidn’t came loose at all. We tried everything and ended with replacing the gearbox!
I am glad for you is was going well.
Nice vid man.
Top tip, pre charge your new oil filter before install
Good tip!
Looking forward for the sequel!
I wish I had taken video of before/after with engine sound for future reference when I did mine. It made such a difference!
Didn't oil the rubber o-ring on the oil filter before install...
Where can I find the specific crush washers required? check the site and i dont require the bolts as well
Love this channel!!!
✌🏻👌🏻from Spain. Seville
The R1150 gs is a great bike. Video is great. I used your guides on the abs etc many times. I have a 2010 R1200 gsa with a partially blocked fuel filter. It seams the only way to solve the problem is to reserve flush them. Do you have any ideas?
bmwpartsguy.com/products/fuel-filter-bmw-oilhead-hexhead-k-bike-scooter-ducati-triumph-16-14-2-325-859-enduralast-ff-859?_pos=13&_sid=97a461204&_ss=r
I use 10w40 for mine R1150GS, what do u think?
20w50 is best for air/oil cooled models, the liquid cooled ones take 10w40
@@TheBMWGuy thanks a lot.