Dont suppose you remeber what size main and pilot jet do ya? Sons got a pretty similar setup but mvt dd ignition, s race exhaust, 24mm schmitt carb, 30-35mm malossi intake, struggling to get the the thing running right in the lower rev range, at the moment ive put a 118 main and 45 pilot
if i'm right the biggest kits with original crankshaft length are the 80cc kits, above you need a longer crankshaft, but you might need to machine your crankcases to fit it but on stock crankshaft i wouldn't advise more than a 50cc kit
technically no you can use the stock crankshaft on the 77 Stage 6 (since its the 39mm stock stroke), but i wouldn't advise to put anything above a 50cc on a stock crankshaft or you might break it
Meanwhile my 170cc DT125 does 116km/h lol, I even have 18/55 gearing on it and it would still like longer gears, pulls from 5,5k to 7,5k and dies off 😂
1991 DT125R 2-stroke. I havent skimmed the cylinder and added a spacer yet to align the ports correctly. It blocks like 2-3mm from the transfers if you just bolt on the 170cc kit. Very comfortable to ride though! With stock cylinder and worn piston+crankshaft it peaked at 9000rpm and I got 124km/h @@86tpr_rieju
port the exhaust port, possibly get bigger carb and get a more top end oriented exhaust pipe so the powerband is in the normal tuned range for 170cc (11k-13k)
@@kelapummi65 The port is plenty tall for big duration, gotta space my cylinder higher and do the pipe trick and widen exhaust port :) I already did skim 0,6mm off the head and put some extra gasket under the cylinder after my first comment. It made a big difference in powerband, it now has a dip at 7500-8500rpm and then pulls at 9500-10500 which it never revved upto before.
what are the grips you put on it? they look nice i want some
emig
do you think that i can put the setup you have on yours on a derbi gpr50 from 2006 ?
Dont suppose you remeber what size main and pilot jet do ya? Sons got a pretty similar setup but mvt dd ignition, s race exhaust, 24mm schmitt carb, 30-35mm malossi intake, struggling to get the the thing running right in the lower rev range, at the moment ive put a 118 main and 45 pilot
Fet🔥👑
kuk
Tja bror funderar på att köpa ett enox evo 2 rör t min drac vad är det jag behöver ändra för att inte motorn ska skära
höja munstycke ungefär 10 storlekar
@@86tpr_rieju Vilket munsycke hade du me enox?
what is the difference between the 77cc airsal and 77cc stage6 and can i message you somewhere ?
Quality
🥰🥰🥰
Vart köpte du crossplattan?
What would you recommend upgrading if you have a stock bike and want good acceleration and top speed?
if you only can get one thing its a good exhaust, but a decent cylinder paired with a exhaust gives huge power
@@86tpr_rieju ok thanks
is enox worth it for 50cc? what was your top speed with enox and 50cc?@@86tpr_rieju
fully stock moped would go way mutch faster with better exhaust like giannelli or voca
king
When you change the exhaust, it blew up because you didnt buy a bigger jet or can you just adjust the carb?
depends on but its safer to change the jets
what cc can i drive with orginal crank shaft
if i'm right the biggest kits with original crankshaft length are the 80cc kits, above you need a longer crankshaft, but you might need to machine your crankcases to fit it
but on stock crankshaft i wouldn't advise more than a 50cc kit
How much he spend
do you know where you bought the speedometer?
It came with the bike
must i change the crankshaft when iam buy this cylinder ?
if you use a innerrotor to, then yes
@@86tpr_rieju can you give me yoir instagram becouse i need help
technically no you can use the stock crankshaft on the 77 Stage 6 (since its the 39mm stock stroke), but i wouldn't advise to put anything above a 50cc on a stock crankshaft or you might break it
Var det stor skillnad på axxen mellan enoxet och det underliggande röret?
ja
what s the fuel consume with all the modifications ?
5l=50km
va kör du med för drevning?
Where did you buy the front fender/mudguard?😊
hp front fender from twostroke
@@86tpr_riejuthanks
che rapporti?
yo bro why u use no air filter?
expensive but got one later
how did you turn the led on and off?
With a switch duh?
Why didn't you just buy a motorcross/enduro bike with like 125cc? Just curious this is no hate :)
the fun part is building it myself, and working on the engine. and i already have a motorcross on the side so no need really
And no 125 has the same size and weight and shape of a lot of the 50cc outs ther
Varför köpte du Yasuni r4 istället för r3?
ska vara bättre effekt matchat med den cyllen
is 70-80 stage 6 exhaust good?
70-80 rt is good yes. perfect for 77br
vilken crossplatta?
vart får du pengarna ifrån bror
sälj delar och jobba
are the crankcases modified/flowed?
no
hur montera du elen?
Hur gjorde du för att fästa crossplattan?
buntband
What does mvt dd do?
gives more acceleration
what transmition are you running?
14-53
Vart fick du det andra ljuddämparen firån
tog en som jag hade från crossen hemma
ska inte ljuga den är fet
@@86tpr_rieju
tror du att man kan köpa sådana separat
@@86tpr_rieju
hur monterade du hastighetsmätaren på ett annat ställe?
först va de buntband t bromsvajern, i andra halvan buntbandade jag fast den till kylaren
Sprocket sizes??
15 front
15 front 52 rear
Dokker må ha tyngre giring
Tror du det går att ha 77br med org vev?
om du kör med org tändning så går det
@@86tpr_rieju Vad går den med org tändning?
@@triangle3370 104
Bessa du om moppen?
ja, efter jag torska
fet
jönköping?
jaa
Meanwhile my 170cc DT125 does 116km/h lol, I even have 18/55 gearing on it and it would still like longer gears, pulls from 5,5k to 7,5k and dies off 😂
is it 4 stroke?
1991 DT125R 2-stroke. I havent skimmed the cylinder and added a spacer yet to align the ports correctly. It blocks like 2-3mm from the transfers if you just bolt on the 170cc kit. Very comfortable to ride though! With stock cylinder and worn piston+crankshaft it peaked at 9000rpm and I got 124km/h @@86tpr_rieju
DT are 2 stroke @@86tpr_rieju
port the exhaust port, possibly get bigger carb and get a more top end oriented exhaust pipe so the powerband is in the normal tuned range for 170cc (11k-13k)
@@kelapummi65 The port is plenty tall for big duration, gotta space my cylinder higher and do the pipe trick and widen exhaust port :) I already did skim 0,6mm off the head and put some extra gasket under the cylinder after my first comment. It made a big difference in powerband, it now has a dip at 7500-8500rpm and then pulls at 9500-10500 which it never revved upto before.
enox 50/100cc
What an downgrade the W face was
which handlebars do you have?