Ford Fiesta MK7 (2008-2017) door panel removal, door handle removal - Tutorial

Quick, simple and detailed instruction on how to remove the door panel/door card and the door handle at the Ford Fiesta MK7 ´09.
difficulty: intermediate
estimated time: 20mins door panel, 5mins door handle
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
This channel uses affiliate links. As an Amazon Associate, I earn from qualifying sales by using these links. There are no additional costs for you.
53-Piece 1/4" Socket Set amzn.to/3nmbJh5
Doorpanel removal tool:
amzn.to/3RiMtEe
Work Gloves thin: amzn.to/4ccN8yS
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Doorclips Partnumber: 1831519
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Musik:www.frametraxx.de/info/gemafr... Point of View von Frametraxx
www.frametraxx.de/info/gemafr... Bless me von Frametraxx

[@mautazalsabbagh3165]

Thanks for the video and the very clear instructions! My speaker was blown, with your help the swap for a new speaker was very easy!

[@i-car-us]

Thanks 🫶

[@Slightly-Below-The-Average]

Lost a socket behind the panel. This video turned a frustrating situation into an interesting one, oh and I got my socket back too. Thank for uploading.

[@labradormcgraw]

Thanks a million! I carelessly dropped a torx bit down the side aperture while removing the door handle, so I had to take the whole side off to retreive it. This video was absolutely invaluable - particularly the image detailing the exact positions of the clips. Thank you again. 😃👍

[@i-car-us]

So what can I say except "you're welcome"

[@labradormcgraw]

@@i-car-us 😃

[@iancole4520]

Thanks so much mate for this video it really helped me doing this job as I had to change a wing mirror on my dad's car .
Thanks ian

[@i-car-us]

Happy to help. Thank you, sir

[@scattman57]

brilliant tutorial many thanx

[@i-car-us]

Happy to help

[@femibicky]

Thanks bra. Very good video

[@i-car-us]

Thanks ✌️

[@f0rbidden0ne]

Hi in the door handle you turn the screwdriver t 20 in the same direction for loose and for reinstalling. It’s only turning to you right side ??

[@i-car-us]

Yes it looks like this in the video, but is explained to turn it counterclockwise to release it

[@Immarceline0907]

Wich torx key need?

[@hannahdeakin7391]

What sizes are the 1st 4 screws removed from the door panel please?
T20 screw for the door handle one is it 4mm?
& what are the two torx screws in the middle of the door panel?

[@i-car-us]

I guess they are all Torx 20 and external hex 8mm or 10mm...Just buy a socket set and be safe

[@ubatubaable]

The screw to release the non moving part of the exterior door handle just spins and does nothing. Can I get at it from the inside of the door if I remove the panel. Many thanks

[@i-car-us]

Try to get some tension on it and screw it out then.
Maybe try to clip the panel out, hold it in tension and then screw it out...
Most of the time when this happens, the screw is already out of the door but stuck in the panel.
Good luck 👍

[@ubatubaable]

@@i-car-us many thanks for your prompt reply, it’s much appreciated.

[@maikl6920]

откручивал ручку по часовой и прикручивал по часовой -Это как !???