Hantek DSO2D15 2 Channel Digital Storage Oscilloscope First Impressions
HTML-код
- Опубликовано: 25 дек 2020
- This is a quick review of Hantek Digital Scope DSO2D15
The DSO2D10 is the small (100Mhz) small brother
Also has a a Wave Generator
For sine wave you can get up to 25Mhz frequency - Наука
Thanks alot Sir for sharing your knowledge with us!
Regards from Germany.
I bought one yesterday, it looks nice
Installing radiators on both IC inside is highly recommended
Please post more reviews. Thanks
Thank you !
It's such a long wait to get it out of China, and such a mystery that it is not listed on Hantek's site, that your video is a balm on the "does this thing even exist ?" wound.
On paper it has better specs than DSO5102P while being cheaper... but I started to be so disappointed by the wait and lake of information that I was about to cancel my order. Not only you prove it exists but you show how it looks neat, no obvious bugs (is this really a Hantek product ??? XD ) I guess you've just helped a bunch of people to find some patience.
Thanks for your comments. Im glad I've helped someone.i have received so much good advise from youtube that i wanted to give back. This was my first video -not too good technically- but i hope won't be the last!
@@javiermitchell7073 You did well, it is easy to understand, that's what matters. :)
Happy to be your third subscriber. ^^
I measured DSO2D10 from the output of 74lvc1g14 tr-1.5nS, the bandwidth of the oscilloscope is 250 MHz. With a bandwidth of 100 MHz, the readings were a pulse rise time of 3.5 nS
Do you have any waveforms to view ? The specs of the 2D10 says 3.5ns so if you got that then it's in spec nothing extra. It's 2.3ns for the 150MHz model
Bought the DSO2D15 model, only months later I discovered it has Trigger Level problems with signals below 300 mVpp @ 1 KHz. I did all the firmware updates, still the traces run on the screen, no way to stop them. Things get worse if you keep the oscilloscope on for more than ten minutes.
Then, if you select a 50 mVpp sine wave with the internal signal generator, the image is strongly noisy, distorted.
I contacted Hantek several times, they wanted a video of mine showing the issue. Sent the video twice in a month, then Hantek disappeared. I re-sent a final e-mail today, I am waiting for a sign of life from them. At this moment no help at all, their after sale sucks.
I did a BIG mistake, I should have bought a Tektronix instead but you only learn these things later...
Hi, any update on this issue, did you get anything else? i am looking for something similar that doesn't break the bank. any recommendations. Thanks.
@@jeff15 Hantek has the worst after sale I ever met in my life, neither with the latest update file the issue has been fixed -- save your money, get a Tek 1052C or a Keysight EDUX1052G.
Thanks a lot!
Arrived today Ordered Dec 30 2020 ... they put the stupid power adaptor on the screen side sitting against the screen. Used my own US power cord .. had to turn it on and off a few times it was stuck at the Hantek Logo but Seems to be working now .. and Yes was your review is why I bought it .. replacing my OLD CRT Scope ..
Rob, I just ordered this scope. I gather the scope auto switches from European 220v to US 120v safely?
thank you!
I’m hoping you can help me. I just got a Hantek DSO2D15. The trigger setting in 10X mode is not stable. I’m not sure if my scope is broke or if it’s a defect in the software. It seems to work fine in 1X mode.
Set the scope in 10X mode. Connect the probe to a power source - I used the 5 volt probe check. Set the trigger or hit the Autoset button. Now adjust the volts per division a few times. Does your trigger setting drop down to 0?
Thanks for your help and keep up the great videos.
Hi, friend! Could you try to connect the device to Windows 10 PC or laptop?
I received few days ago my DS02D153 and I can't connect it to my Windows 10 laptop (the device do not recognized). All Hantek drivers and SW are installed.
I ordered today
IS IT PROFESIONALLY OK IN COMPUTER AND LAPTOP REPAIRING FEILD
I don't know why there is no mention of an output tone from the Signal Generator.... I know that the generator outputs a sine-wave because I can see it on the scale... but is there also a signal tone for a radio speaker that you can physically hear from a speaker ? I'm trying to do a shortwave radio alignment and I need to physically hear the 455Khz audio signal tone from the generator.
To hear sound you need a speaker, as far as I am aware the scope does not have a speaker, nor do I recall hearing any sound from it!
I have a very big problème with same scop with the last firmware. The midle of screen is disturbed and frequency is mesured is multiple by 2!
Did you fixed it?
Ho there! Would you suggest Hantek DSO2C10 , 100 Mhz , 2 channles ?
How do you like it?Was better scope out there for same money?
Can this be used as a digital multimeter? If so how? I would like to check capacitor polarity but can't figure out how?
You ca measure voltages, for AC values will be more accurate than a multimeter. If the capacitor still has voltage, you can measue it, but most probably has gone flat
Дякую!
I have the 100mhz version and it wont read any of my usb sticks, could you try yours and let me know if it works please.
Just tried after formating an USB stick to fat32. when you plug it, you get a "sorage device is connected" . clicked on "save to usb", and the file is there - bmp format
@@javiermitchell7073 Thank you very much, I'm going to try another USB stick and hopefully find one that works.
@@3dmaxuser It (the USB thumb drive) must be formatted in "Fat32" for it to work.
Hi, please is this scope good for serial decode? Thanks :)
I did some SPI decoding, but I don't have a lot of experience in that field, so can't compare with other scopes
how many probes are included in this model?
In theory 2, but I only received 1, so currently discussing with seller how to get the missing one
good afternoon, where did you buy it? is there a link?
I bought it from aliexpress, this seller does not cuurently sells this, but thare are plenty of other sellers that do in Ali Express
Aren't you concerned at how noisy and unstable the signal was on the scope?
Higher bandwidth more noise. The unstable signal is probably from the signal generator.
But Hantek isn’t the best scope manufacturer. I’m not sure if this would be the best choice and it’s only a 2 Chan scope.
I did a project with a 3 phase DC motor and 4 Chan was the minimum to get it done.
@@Todestelzer you can't really get a 4 channel scope with similar specs at this price. They do make 4 channel scopes but you need to take the price point into account
Интересный обзор.
Rectangular pulse generator up to 5 MHz?
The only place I found the specs are n the bangood Site:
www.banggood.com/Hantek-DSO2D15-Dual-Channel-+-AFG-Digital-Storage-Oscilloscope-150MHz-1GSa-or-s-Signal-Generator-Oscilloscope-2-In-1-p-1766504.html?cur_warehouse=CN
You can see that for square wave the limit is 10Mhz:
Sin Frequency range 0.1Hz~25MHz
Square/pulse Frequency range 0.1Hz~10MHz
Triangular wave Frequency range 0.1Hz~1MHz
Sampling wave Frequency range 0.1Hz~1MHz
Index Frequency range 0.1Hz~5MHz
as per the manual: square wave is 0.1Hz~10MHz, sinewave is 25Mhz
Why are you only focusing on the obvious that we can see ourselves on websites and such? Where is the review of this product?