Just threw this on a New hyperlite and the shield doesn’t appear able to lay deep enough into the J Clip. The instruction specifically say not to flip the clips around either. Is this ok?
The Concept 3 clips are meant to hold the face shield in place, so they are going to hold pretty tight. There should be plenty of give to move the face shield up enough to take you helmet on and off, however you wont be able to flip the face shield up all the way without hitting some resistance.
Hi Pure Hockey, I have a question. My helmet is the IMS 5.0 and I did all the steps correctly. When I connected the top clips to my face shield, my helemet just got stuck in a certain position. I dont know what to do
The top clips are shaped to allow the shield to hold itself up, but can easily be moved up an down without doing any damage. You should be able to force it back down into normal position, but if you are having trouble we would recommend seeking help one of our stores or from a local pro-shop. thanks!
@@presidentnixon33 I also have the IMS 5 and what I did was just not tighten the screws too much. It allows for it hold itself up but I can push it down. Now, I don't know if that's not recommended and if I should have the screws tightened all the way.
Just bought new helmet and the bubble, from Woodbury Pure hockey, store guy said He would put on, got to hotel and son put on helmet... No j clips attached and no snaps on side to clip helmet too... Over $300 spent and not put together right and he plays before u open... Thanks for the help... No very happy
Both will fit, but it comes down to the size of the face of the user. Typically a youth player would wear the junior size and a teenager-adult would wear a senior size.
I just bought a new fishbowl Bauer senior on a reakt 150 and the top clips are close together so the fishbowl moves side to side unless I fully buckle the entire helmet is this the new design?
The Re-Akt 150 and Concept lll have been around for at least a few years now, so it isn't a new design. As long as it's not moving when buckled and sits properly on your face, then it should be installed right with the correct fit.
Hi Alex, We would recommend re-watching to ensure you are positioning the top clip the correct way. The hardware provided should be long enough to accommodate all the helmets listed on the product page. If you are still having difficulty feel free to reach out to our customer service or head to a store for assistance. Thanks!
@@purehockey Alex is right. The screws that come with the CIII face shield DO NOT have enough length to go through the front black clips and into the helmet...any helmet I have tried. The screws are a 1/8 to 1/4 inch too short. So it requires either different clips or longer screws. As a result, I now have a collection of black clips from previous CIII shields. I go to the hardware store and pick up some hefty cable clips to use with provided screws instead.
I noticed when I installed the top two screws it seems very tight and makes it hard to raise and lower the fishbowl. It’s almost like the screws and clips are going to pop out of the helmet. But if I loosen them they are only finger tight and I feel will fall out over time. Am I doing something wrong?
It shouldn't be too tough to raise the face shield, and you definitely want to make sure it's on there tight enough so the screws don't come out. If you are close to a store, you can bring it in, and an associate can take a look. Otherwise, you can contact customer service and we can try to walk through it - 866-787-3462 or customerservice@purehockey.com.
i have the bauer fog spray and when I read the directions/follow yt videos on how to apply it, it still fogs up for me. id like to stick with the bauer concept III, what can I do to prevent fog as much as possible?
Just bought this face shield .. back to the store I go Only 2 backing nuts in the package Double check the hardware before you buy .. somebody was sleeping on the job
Sorry to hear you were missing parts. Hopefully the store was able to get that sorted out for you. If not, please call our customer service department and we will take care of that for you.
Thank you for the offer for help. I had no pre-existing backing screws so the 4 I received wasn’t enough. ( thus thinking I was shorted) Might want to mention that ..I had to come up with 4 nuts to put the j clips on Great video .. very helpful 👍
I lost the top screws for this and sadly can't put it on because the normal screws for the helmet are too short. Any idea where I can get some new ones?
Hi Adam, I'm not totally sure what size of screw the Bauer Concept 3 would need but we do have a Bauer Helmet Repair kit that may work. www.purehockey.com/product/bauer-universal-helmet-repair-kit/itm/47957-2/
I am just a mom trying to figure this all out😅 The chin cup, looks oddly way too close. He has other helmets where it rests on the cage. I see where to adjust it by the clip on the side of the helmet but is there anyway to make it more comfortable? Doesn’t look like it really adjusts other than that? Maybe because he got a junior but the guy at pure hockey told me not to get the senior because it doesn’t fit the helmet as good which I thought was weird to say.
You should be able to adjust the side straps so it doesn't sit so close or is as tight on his face. You do want it to sit on the chin, with the shield fitting properly in the J-Clips for safety but depending on your sons head size and shape, a senior cage may be the better option. If possible, you can bring the helmet into the store and show one of our employees to see what they recommend.
Bauer does have an emergency helmet kit: www.purehockey.com/product/bauer-emergency-helmet-repair-kit/itm/5617-2/ Although not all the Concept 3 hardware is included(no top clips or j-clips)
Could you please tell me if it's compatible with a Warrior Krown 360 helmet? If so, and the helmet is size S, should it be the Junior or the Senior version?
It will depend which youth helmet you have. Please see our chart on the Bauer Concept 3 Shield - Junior page. That has compatibility for most helmets. www.purehockey.com/product/bauer-concept-iii-full-face-shield-junior/itm/12178-21/
Hi Sherrilynn, Great question! Unfortunately the Concept 3 junior does not fit on the Bauer lil sport. We would recommend upgrading to the Bauer Prodigy helmet, or the Bauer Re-Akt 100 youth helmet. Both those options run around the same size as the lil sport and have plenty of adjustment and the Junior concept 3 fits great on both!
Hi Tyler! We have had no issues installing on the IMS 5.0 Sometimes it helps to have the face shield in the up position when installing the screws for a better angle.
Can the j-clips be trimmed? Seems like I need to put the j-clips in the lowest position but then they interfere with the side straps. Thanks for the help.
Hi Katie, Great question! We do not recommend trimming the j-clips. If you have a Pure Hockey location near you they can assist you with attaching the shield correctly. If not, most pro-shops should be able to help as well. Thanks!
Thanks for the feedback! If fogging does occur try using defogger spray or gel. Here's a couple options that work well with fogging issues. www.purehockey.com/product/anti-fog-gel/itm/33901-2/ or www.purehockey.com/product/a-r-hockey-spit-shield-defogger/itm/5174-2/
The links are in the description. The product pages have the charts if you scroll down a little bit. Senior - www.purehockey.com/product/bauer-concept-iii-full-face-shield-senior/itm/12178-41/ Junior - www.purehockey.com/product/bauer-concept-iii-full-face-shield-junior/itm/12178-21/
Thanks for the instruction video. Just installed the visor to the CCM Tacks 210 - Size Large. This one is not on your list yet, but can be added.
Thanks for the feedback!
@@purehockeywhere can I buy the installation kit for my ccm face mask
Connor bedard has entered the chat
Pretty good endorsement!
Does the shield fit the Bauer Lil Sport helmet? Im having a really hard time. Feels like the screws aren’t long enough to reach the holes
This shield will not work well with the Lil Sport helmet.
The Bauer manual states the clips should not be inverted as you are suggesting to tune the chin strap. is it possible to do without issue?
We have had success installing the Concept 3 with the clips in both positions
Just threw this on a New hyperlite and the shield doesn’t appear able to lay deep enough into the J Clip. The instruction specifically say not to flip the clips around either. Is this ok?
We would say as long as the shield is making contact with the J-Clips and feels secure on your chin that this is ok!
I’m having a problem with the clips when I scew them on they get to tight that it doesn’t allow the visor to move at all
The Concept 3 clips are meant to hold the face shield in place, so they are going to hold pretty tight. There should be plenty of give to move the face shield up enough to take you helmet on and off, however you wont be able to flip the face shield up all the way without hitting some resistance.
Hi Pure Hockey, I have a question. My helmet is the IMS 5.0 and I did all the steps correctly. When I connected the top clips to my face shield, my helemet just got stuck in a certain position. I dont know what to do
The top clips are shaped to allow the shield to hold itself up, but can easily be moved up an down without doing any damage. You should be able to force it back down into normal position, but if you are having trouble we would recommend seeking help one of our stores or from a local pro-shop. thanks!
Did you ever find a solution to this, I’m having the same problem
@@presidentnixon33 I also have the IMS 5 and what I did was just not tighten the screws too much. It allows for it hold itself up but I can push it down. Now, I don't know if that's not recommended and if I should have the screws tightened all the way.
Just bought new helmet and the bubble, from Woodbury Pure hockey, store guy said
He would put on, got to hotel and son put on helmet... No j clips attached and no snaps on side to clip helmet too... Over $300 spent and not put together right and he plays before u open... Thanks for the help... No very happy
Lmao it’s so simple to set up u could’ve just taken it apart and did it yourself
just got it but when I got it pro hockey life did it for us so it was good
Always good to have it installed by a pro!
Would the senior or junior size fit a medium Bauer re Akt 85?
Both will fit, but it comes down to the size of the face of the user. Typically a youth player would wear the junior size and a teenager-adult would wear a senior size.
@@purehockey thanks man
I just bought a new fishbowl Bauer senior on a reakt 150 and the top clips are close together so the fishbowl moves side to side unless I fully buckle the entire helmet is this the new design?
The Re-Akt 150 and Concept lll have been around for at least a few years now, so it isn't a new design. As long as it's not moving when buckled and sits properly on your face, then it should be installed right with the correct fit.
The screws from the mask provided do not have more length what the heck do I do now
Hi Alex, We would recommend re-watching to ensure you are positioning the top clip the correct way. The hardware provided should be long enough to accommodate all the helmets listed on the product page. If you are still having difficulty feel free to reach out to our customer service or head to a store for assistance. Thanks!
@@purehockey Alex is right. The screws that come with the CIII face shield DO NOT have enough length to go through the front black clips and into the helmet...any helmet I have tried. The screws are a 1/8 to 1/4 inch too short. So it requires either different clips or longer screws. As a result, I now have a collection of black clips from previous CIII shields. I go to the hardware store and pick up some hefty cable clips to use with provided screws instead.
I noticed when I installed the top two screws it seems very tight and makes it hard to raise and lower the fishbowl. It’s almost like the screws and clips are going to pop out of the helmet. But if I loosen them they are only finger tight and I feel will fall out over time. Am I doing something wrong?
It shouldn't be too tough to raise the face shield, and you definitely want to make sure it's on there tight enough so the screws don't come out. If you are close to a store, you can bring it in, and an associate can take a look. Otherwise, you can contact customer service and we can try to walk through it - 866-787-3462 or customerservice@purehockey.com.
I am wondering can you do video on how apply splash guards
Hi Michael,
It's on the list! Stay tuned.
@@purehockey kk
i have the bauer fog spray and when I read the directions/follow yt videos on how to apply it, it still fogs up for me. id like to stick with the bauer concept III, what can I do to prevent fog as much as possible?
Hello, we would recommend trying the anti-fog gel (www.purehockey.com/product/anti-fog-gel/itm/33901-2/)
What model is the second one on the top right
Just bought this face shield .. back to the store I go
Only 2 backing nuts in the package
Double check the hardware before you buy .. somebody was sleeping on the job
Sorry to hear you were missing parts. Hopefully the store was able to get that sorted out for you. If not, please call our customer service department and we will take care of that for you.
Thank you for the offer for help.
I had no pre-existing backing screws so the 4 I received wasn’t enough. ( thus thinking I was shorted)
Might want to mention that ..I had to come up with 4 nuts to put the j clips on
Great video .. very helpful 👍
Earlier saying I received 2 was a mistake
I lost the top screws for this and sadly can't put it on because the normal screws for the helmet are too short. Any idea where I can get some new ones?
Hi Adam, I'm not totally sure what size of screw the Bauer Concept 3 would need but we do have a Bauer Helmet Repair kit that may work.
www.purehockey.com/product/bauer-universal-helmet-repair-kit/itm/47957-2/
Good morning, the Bauer Re-akt 65 large senior helmet is compatible with the concept 3 full-face visor, could they be used together?
Yes, they could be used together.
I am just a mom trying to figure this all out😅 The chin cup, looks oddly way too close. He has other helmets where it rests on the cage. I see where to adjust it by the clip on the side of the helmet but is there anyway to make it more comfortable? Doesn’t look like it really adjusts other than that? Maybe because he got a junior but the guy at pure hockey told me not to get the senior because it doesn’t fit the helmet as good which I thought was weird to say.
You should be able to adjust the side straps so it doesn't sit so close or is as tight on his face. You do want it to sit on the chin, with the shield fitting properly in the J-Clips for safety but depending on your sons head size and shape, a senior cage may be the better option. If possible, you can bring the helmet into the store and show one of our employees to see what they recommend.
Out of curiosity, does bauer have a replacement/repair kit for assembly pieces?
Bauer does have an emergency helmet kit: www.purehockey.com/product/bauer-emergency-helmet-repair-kit/itm/5617-2/ Although not all the Concept 3 hardware is included(no top clips or j-clips)
Love the content
Thank you!
Could you please tell me if it's compatible with a Warrior Krown 360 helmet? If so, and the helmet is size S, should it be the Junior or the Senior version?
The concept lll does not fit very well on the Warrior Krown 360.
@@purehockey Thank you! I guess the same goes for the Warrior Krown PX3.
Correct. Unfortunately, it doesn't sit properly on the Krown helmets.
@@purehockey Alright, thank you very much for your help!
Does this fish bowl work on youth helmet pls pure hockey reply
It will depend which youth helmet you have. Please see our chart on the Bauer Concept 3 Shield - Junior page. That has compatibility for most helmets. www.purehockey.com/product/bauer-concept-iii-full-face-shield-junior/itm/12178-21/
Does it fit with the Reebok 11k helmet? Thanks!
Unfortunately, it doesn't seem to fit properly on this helmet.
Does it fit the Bauer BHH1500L model helmet?
Hi Steven! Yes the Concept III will fit on a Large 1500 helmet. Thanks!
can i play with the shield without j Clips?
You could, however it isn't recommended because the cage won't be fully secure, which could cause fitting issues or injury.
Will the Jr fit a small ccm fl60? Thanks
Unfortunately, it will not fit.
Does it work with the Bauer IMS 7.0?
Yes! it will fit all sizes of the IMS 7.0
Does the Jr size fit in the Bauer lil’ sport helmet?
Hi Sherrilynn, Great question! Unfortunately the Concept 3 junior does not fit on the Bauer lil sport. We would recommend upgrading to the Bauer Prodigy helmet, or the Bauer Re-Akt 100 youth helmet. Both those options run around the same size as the lil sport and have plenty of adjustment and the Junior concept 3 fits great on both!
How do I install the j clip
If you go to 3:10 of this video, there is a step by step and illustration of how the J Clips are installed.
any one have issues trying to install this on the ims 5.0 it seems like the screws are to small
Hi Tyler! We have had no issues installing on the IMS 5.0 Sometimes it helps to have the face shield in the up position when installing the screws for a better angle.
Does it fit on ccm tacks 70
does it fit a reakt 85
Yes, it will fit a Re-Akt 85.
Keep it up
We will! Thank you for tuning in!
Does anyone know how to tint?
Wish we could help you on this end, but we're not familiar with any company (maybe a local tint shop?) that will tint a Full Shield.
Can the j-clips be trimmed? Seems like I need to put the j-clips in the lowest position but then they interfere with the side straps. Thanks for the help.
Hi Katie, Great question! We do not recommend trimming the j-clips. If you have a Pure Hockey location near you they can assist you with attaching the shield correctly. If not, most pro-shops should be able to help as well. Thanks!
It fogs up. The CCM FV1 does not.
Thanks for the feedback! If fogging does occur try using defogger spray or gel. Here's a couple options that work well with fogging issues.
www.purehockey.com/product/anti-fog-gel/itm/33901-2/
or
www.purehockey.com/product/a-r-hockey-spit-shield-defogger/itm/5174-2/
Dawn dish soap or hair conditioner works as well
We’re is the link
The links are in the description. The product pages have the charts if you scroll down a little bit.
Senior - www.purehockey.com/product/bauer-concept-iii-full-face-shield-senior/itm/12178-41/
Junior - www.purehockey.com/product/bauer-concept-iii-full-face-shield-junior/itm/12178-21/
Awesome first step Bauer missing half the hardware
If your packaging did not come with all the hardware please reach out to our customer service and we can send you the hardware you need!
The incorrect way to wear the bucky is the most sty
Function over fashion!
Definitely does not fit the CCM youth FL3DS
Yo I got a question, what do recommend for anti fog cuz I tried howies hockey anti fog and it didn’t work at all🥲
Sven Can See Anti Fog Gel!
www.purehockey.com/product/anti-fog-gel/itm/33901-2/
Will a Bauer IMS 5.0 work with concept 3
Yes it will!