Hi Yasuhiro, first and foremost thank you for taking the time to make the video and for sharing your idea/version on how to make the jigs! Most of us will have these kinds of tools in our shops as well scraps of wood, what a simple but effective way to use up the scraps. For me this video came at a good time, I have to make some Black Walnut and Purple and Yellow Heart dowels for some projects I’m working on. Thanks again for sharing, looking forward to your next video 🙏 Take care, Wayne
My favourite type of jigs, simple and easy to make and are extremely useful ... especially liked the last method of creating round tapered legs (or whatever they are used for) ... superb 👍
This is so awesome. I aint a woodworker but have ran into a bunch of times i needed a certain dowel size that a store didnt have. Now i can easily just make any size.... that is if i remember this trick 🤣
I love using dowels in my projects. This is great! My dad likes his kreg jig and screws. It works but the ascetics of a dowel is superior to a screw. Thank you, sir.
I had to make a 5/16" Maple dowel and I used the the one blade method clamped to the edge of the board over the 5/16" hole and it worked exactly as shown. Perfect
Don't use a thin bladed kataba saw for this if possible. The few teeth doing the cutting will wear VERY quickly. The example of the chisel used after that in the video is much better because the mass of the chisel can absorb the heat and the edge can be quickly resharpened.
i think the trick to consistency is to have the piece of timber remain level as it goes through. the drill moves up and down as its pushed forward varying the thicknes slightly perhaps a shelf on either side of the hole will lessen that variance but some very good ideas in there
I can understand the use of using a "jigsaw" blade but, a normal saw? What's the risk of over heating the saw blade and ruining said saw? What about using a hacksaw blade instead? I've seen dowels made on a table saw before using a similar jig as what you did with the cordless drill. Love your work and channel. Great video, cheers :)
This is the free world. And no Russian comrades. If you don't like it, then get lost or start using the world's language. Russian doesn't mean anything anymore.
Fantástico você é o cara, que Deus abençoe sua carreira, gênio, fico muito contente de saber que você está com tantas ideias sensacional, estou aprendendo com você thank vermat.
With the simple methods, doesn't the dowel come out a bit too thin? First, you are cutting off a bit of the side of the hole. And second, the jigsaw blade has a kerf. Are there ways around this?
This IS Capitalism. Capitalism is an economic system based on private ownership of the means of production and their operation for profit. It includes capital accumulation, competitive markets, price systems, private property, property rights recognition, voluntary exchange, and wage labor.
Hi Yasuhiro, first and foremost thank you for taking the time to make the video and for sharing your idea/version on how to make the jigs! Most of us will have these kinds of tools in our shops as well scraps of wood, what a simple but effective way to use up the scraps. For me this video came at a good time, I have to make some Black Walnut and Purple and Yellow Heart dowels for some projects I’m working on.
Thanks again for sharing, looking forward to your next video 🙏
Take care, Wayne
My favourite type of jigs, simple and easy to make and are extremely useful ... especially liked the last method of creating round tapered legs (or whatever they are used for) ... superb 👍
love the process, love the simplicity...wait wait hold up... its a lathe table saw? dang those are some quality dowels
This is so awesome. I aint a woodworker but have ran into a bunch of times i needed a certain dowel size that a store didnt have. Now i can easily just make any size.... that is if i remember this trick 🤣
Absolutely brilliant! Jigs for all sizes. Keep up the good work.
I love using dowels in my projects. This is great! My dad likes his kreg jig and screws. It works but the ascetics of a dowel is superior to a screw. Thank you, sir.
Holy god, this guy's got dowels sorted!
This video is pure gold, it deserve a big thank$
Always impressed by your skill and imagination! 👍🙂
I had to make a 5/16" Maple dowel and I used the the one blade method clamped to the edge of the board over the 5/16" hole and it worked exactly as shown. Perfect
Voce é uma dádiva divina para todos que gostam da arte em madeira. Obrigado pelos videos!!!!
Sir, you are the one.
Thanks for share with us,you expertise and time.
the jig with the circular saw and the drill is pure genius!
Awesome!!! The best ever video on dowel making.
Don't use a thin bladed kataba saw for this if possible. The few teeth doing the cutting will wear VERY quickly. The example of the chisel used after that in the video is much better because the mass of the chisel can absorb the heat and the edge can be quickly resharpened.
True, but it is just one of many ways shown and gives you alternative ways to make eg if the saw is all you have to hand
@@Grahammon Of course sometimes options are limited. People should just be aware that some jig designs are a lot more temporary than others
動画を拝見してワンブレードを真似させていただきました！ まあまあの精度で出来ました。
あとはペーパーで焦げを落として穴埋めの埋木として使いました。とても参考になりました。
ありがとうございました。
that last machine is awesome, great for furniture legs
It's the kind of techniques in always in need of. The perfect medicine.
I love the circular saw lathe. Super dope.
丸棒が必要なdiyって私はまずないんだけど、これはすごいね。使わなくても知ってるだけでもいい。
i think the trick to consistency is to have the piece of timber remain level as it goes through. the drill moves up and down as its pushed forward varying the thicknes slightly perhaps a shelf on either side of the hole will lessen that variance but some very good ideas in there
Parabéns !! poucos atigem este nível de sofisticação.
Japanese carpentry is the finest.
Very impressive. You have some impressive techniques
You are Genius. Thank You for sharing!
this is badass you are badass thank you. i especially love the three blade jigsaw blade jig. awesome.
Very nice thanks for sharing keep your good work up thank you
拍手を送らせてください！👏👏👏
勉強させていただきました！
Amazing! Tips only a master can give.
Thank you man. Your the best.
You do everything very carefully. It's nice to watch.
Genius...pure genius!!!
Wonderful idea, thank you !
that is such a fantastic idea!
Well. I guess that covers it. Wow! Awesome! Thanks!
とても良いアイデアですね‼️
９ミリの丸棒を探したのですが10ミリか8ミリの丸棒しかホームセンターに無いため参考になりました。
動画の様に試してみたいと思います。
Das war sehr, sehr hilfreich. Vielen Dank dafür. I`m very impressed. 😎 👍👍👍
You are a wonderful woodworker Yasuhiro San! 🪚
I from Indonesia....I like🎉 because simple
I think my mind exploded at about the 5 min mark! =D
So inventive! Beautiful...
So smart. Thanks for sharing.
Nice and simplest process
I can understand the use of using a "jigsaw" blade but, a normal saw? What's the risk of over heating the saw blade and ruining said saw? What about using a hacksaw blade instead? I've seen dowels made on a table saw before using a similar jig as what you did with the cordless drill. Love your work and channel. Great video, cheers :)
Dopest the saw and drill!!
Будем иметь ввиду, спасибо за идею!
I’m always amazed with what you come up with ❤
I found out a way to make round material smaller by rolling it on a table saw surface. You just set the blade height to the amount you want to remove.
It's a good one
Thank you!
Sei un GENIO
This guy is serious about his dowel rods
Потрясающе.
Уважение товарищу.
This is the free world. And no Russian comrades.
If you don't like it, then get lost or start using the world's language. Russian doesn't mean anything anymore.
Amazing!!! I like your channel!!!
hola .. muy lindo video .. saludos cordial
Amazing skills 😎😎😎😎
Very good.
Fantástico você é o cara, que Deus abençoe sua carreira, gênio, fico muito contente de saber que você está com tantas ideias sensacional, estou aprendendo com você thank vermat.
Наконец-то сделаю себе 3-х метровые черенки для лопаты.
Грех не поставить лайк такому видео
Спасибо за ролик👍
👍👌👏🤜🤛✊💪🤝. Очень классная работа.
very interesting video🎉
Smart guy❤
Einfach Klasse ,danke 💪👁️
Good sounds
Thanks
So cool..
Parabéns muito bom seu trabalho 👏👏👏👏
Спасибо, очень интересная последняя приспособа. Вместо пилы фрезер и фиксация заготовки позволит делать многогранники.
Чтобы делать многогранники нужна делительная головка, иначе красивых многогранников вы не получите.
@@Pilot-gu3xz можно и шаблон по количеству граней на вал закрепить. И его фиксировать.
@@константинфирсов-р8м Тоже вариант, заодно использовать верхнюю грань шаблона для фиксации вала в нужном положении.
eskerrik asko!
mantap gan 👍
TOP!
Criativo parabéns gostei 👍
Sangat menarik 👍
Интересно, какой способ лучше всего по качеству и скорости изготовления? 🤔
Рекомендую приспособление с двумя лезвиями для лобзика.
@@YASUHIROTV Ооо, искренне благодарю за ответ, буду пробовать! 🤝🏻
ПРЕКРАСНО !!!
8:30-минус глаза. Вызовите врача!! Где мой фрезер!!!
Que interessante 👏👏😀
With the simple methods, doesn't the dowel come out a bit too thin? First, you are cutting off a bit of the side of the hole. And second, the jigsaw blade has a kerf. Are there ways around this?
People like you save us from angry capitalism😁. Don't stop!
This IS Capitalism.
Capitalism is an economic system based on private ownership of the means of production and their operation for profit. It includes capital accumulation, competitive markets, price systems, private property, property rights recognition, voluntary exchange, and wage labor.
@@silverstake88bro, chill out.
👍@@silverstake88
@@silverstake88he said ANGRY capitalism, not Capitalism
I do agree with you 😊
What type of jig saw blade do you use, friend?
sugoi!!!!
How do you keep 90 degree while pushing?
hay quá 👍
Hello, what kind of tree do you use?
That's a lot of saw dust. 😅
The dowels look fantastic, though.
БЛАГОДАРЮ
👍👍
How is that circular blade so thin?
Смотри , повторяй и радость труда станет смыслом твоей жизни ! ! !
👍👍😄
❤
いや、買おうよ。
What types the jigsaw blade using in this video please, thanks
Bosch
@stanmarsh4278 Bosch is the brand
Наигрался😄👍
各部位を応力解析してほしいサンプルだと思いました。
On the first design what blades are used?
Looks like wood jigsaw blades
Токарный станок:🗿🗿🗿🗿🗿🗿🗿🗿🗿
10:00-Диск F.