How can they do.. different styles of projects work needs different strength of joints at various purpose really man you are really creating luxative Diy projects ... disturbing at work time... have a nice peaceful enjoying time with yourself and projects craftsman style projects work worthy
Very nice. What I like about your setup, is that it can be used in ANY shop. It's simply a plate that can go in any vice. Especially handy for those times when you need a dowel, and don't want to run to the hardware store. If you haven't already, you should think about marketing the little tool (unless they're already out there).
Thank you! It worked fine. I used a 2mm sheet metal and the dowels turned out great. Only thing is you have to make the holes 0,5mm bigger than the dowel you intend to make. Cheers!
*I like itsss...💓💓💓👍👍👍💪* Terima ksih atas ilmunya dan sangat bermanfaat sekali. Semoga sehat dan sukses selalu begitu juga dengan chanelnya. From : Adirio / *Indonesia*
Thank you for an interesting and informative video. I did just notice one thing: The whole jig is made left-handed so that the drill must rotate in the "unscrew" direction. This may require "electric drill - screwdrivers" to propel the wood. It can be made for the "screw in" direction by (a) inclining the hacksaw to the right and not to the left and (b) bending the cutting portion from the opposite side of the plate.
I got one of these (broken) in with a bunch of tools at a garage sale. I was wondering how to use it then realized that the person who made it used an old chisel and the broken bit was the largest hole plus handle. How they managed to drill through that quality of chisel I would like to know as it equates to HSS or tool steel quality. Going by the rest of the tools (after the person's funeral) this was made either before W2 or just after. Reasoning he was in his 90's when he passed and would have access to the tooling that could cope with the job. I enjoy using the rest of the tools I got from the garage sale I also know I didn't get most of them as he'd left them to his grandsons. I hope they enjoy using them as much as I do for the one's I was lucky to get.
Так то молодец, но это ещё проще делается, одно отверстие сквозное, рядом с ним глухое, отверстия должны пересекаться на 1/3 или 1/4 а потом так же крутишь шуриком и все ок, края глухого отверстия снимают лишнее. Пользуйся, это способ в разы проще и быстрее.
Только сделано все наоборот и рассчитано для движения против часовой стрелки. Если делать все зеркально, то будет нормально. У нас делают немного по другому.
As a second thought: If it were made from angle iron or steel, the jig wouldn't deform as it did at 3:24. The material used here was "Black iron" or known in France as «Laminé». A more serviceable result might be obtained using "Bright steel" known in France as «Étiré».
You dont need the split in the hole, but drilling an undersized hole then using a reemer to take it to finnish size will give you a better finnish on your dowls. I guess there are a dozen ways to bake a potato this is one of the ways to make a dowl . As cheap as dowls are unless your using some special material in wood then this is an option. But let's understand the use for a dowl on a joint. Lets say you pound this into a screw hole to hold a door frame hing screw thats long grain to end grain joint Like using a golf T its not going to be a very strong joint. Your better off a long grain to long grain patch over a larger area it will have more strength. As end grain sucks up glue befor it can bond properly. A dowl to hold end grain to end grain works but a wider long grain surface will be stronger like the difference of a dowl And dimino the festool dimino has more long grain surface area. A spline joint would be stronger. Dowls have there uses, and they can look good on a project. Work with the wood and dont fight its properties and your project will last longer.
Un accesorio más para el taller. Perfecto. En los extremos de las clavijas o tarugos, vale la pena pasarlos por la lijadora y hacerles un bisel, eso ayuda a que entren con más facilidad en los agujeros. Gracias.
Самый простой и быстрый способ как сделать деревянный дюбель-шкант Который я придумал это- взять лерку для нарезания резьбы по металлу с отверстием под размер шканта зафиксировать её в тисках потом квадратную заготовку в дрель и прогнать через лерку туда обратно на выходе будет отличный шкант круглый и шершавый самое то для клея
Without an alignment block ahead of the cutter to keep the dowel concentric you're going to produce undersized owls as your angle is not precisely axial. If you look at the other dowel cutting designs they incorporate this for good reason.
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
3
Y7ýyy
Qfqt
2:01 - 4:07 - 5:52
How can they do.. different styles of projects work needs different strength of joints at various purpose really man you are really creating luxative Diy projects ... disturbing at work time... have a nice peaceful enjoying time with yourself and projects craftsman style projects work worthy
You have the cleanest hands in the world.
Very nice. What I like about your setup, is that it can be used in ANY shop. It's simply a plate that can go in any vice.
Especially handy for those times when you need a dowel, and don't want to run to the hardware store. If you haven't already, you should think about marketing the little tool (unless they're already out there).
Thank you! It worked fine. I used a 2mm sheet metal and the dowels turned out great. Only thing is you have to make the holes 0,5mm bigger than the dowel you intend to make. Cheers!
Все гениальное просто. Спасибо!
I just like to see all the hand made tools he has, and omg, i've never seen a cleaner shop!!!! Thanks for sharing your skills!
I made this jig today. It works. Not the best finish but very consistent in size. Thanks for the video.
In fact, not a sleek finish works better as a dowel
Hice uno y, me funcionó al 100/100
Gracias por la idea.
Less talk more actions loving your techniques, tools, and simplicity
fl7)78#?#- '?928*91
You've literally just saved me so much money thank you so much for the work you have shown , I am so appreciative of your work thank you again
very good video, you have special style to show your videos, thanks
Great idea. I love the double-footed footed clamp at 10:34
*I like itsss...💓💓💓👍👍👍💪*
Terima ksih atas ilmunya dan sangat bermanfaat sekali. Semoga sehat dan sukses selalu begitu juga dengan chanelnya. From : Adirio / *Indonesia*
Everything you do is smart well done keep it up Mr Smart
Thank you for an interesting and informative video.
I did just notice one thing:
The whole jig is made left-handed so that the drill must rotate in the "unscrew" direction. This may require "electric drill - screwdrivers" to propel the wood.
It can be made for the "screw in" direction by (a) inclining the hacksaw to the right and not to the left and (b) bending the cutting portion from the opposite side of the plate.
All your tools n jigs are homemade and fantastic quality too. Great
Pensa em um marceneiro; mãos limpas, unhas feitas, dedos completos, ... melhor modo de fazer cavilha, parabéns
Amazing.... simples maked dowel.... good job 👍
Excelente aporte. Es la mejor idea que he visto en este tema. Saludos desde Medellín Colombia
I'm going to make one, I like what he has done. Nice job. 👍
Comme d'habitude, c'est propre et exécuter en toute sérénité.
I like your marking tools
A very different take on a dowel jig. Great! However, you should add something to support the dowel going out; it would make the dowels more even.
I would say a supported PVC tubing I was thinking the same thing
I love how he actually uses the tools he makes.
Hi
Interesting video,but a couple of tips, use cutting oil when cutting metal and when using a hacksaw have one hand on each end .
wow really creative. good luck guys
Awesome. Especially on your kids first table saw.
EZ Cut Saw
Thanks for sharing. great video.
Good job ❤
I got one of these (broken) in with a bunch of tools at a garage sale. I was wondering how to use it then realized that the person who made it used an old chisel and the broken bit was the largest hole plus handle. How they managed to drill through that quality of chisel I would like to know as it equates to HSS or tool steel quality. Going by the rest of the tools (after the person's funeral) this was made either before W2 or just after. Reasoning he was in his 90's when he passed and would have access to the tooling that could cope with the job. I enjoy using the rest of the tools I got from the garage sale I also know I didn't get most of them as he'd left them to his grandsons. I hope they enjoy using them as much as I do for the one's I was lucky to get.
Mantap jiwa kawan..... Terus berkarya
よくやった素敵な仕事
Legal amigo . Não precisa amolar não ? Quando vc coloca o marcador é pra abrir um pouco o corte ?
Verry good job...!
very nice dowel
Alternatively, use a half of a door hinge. Just drill the screw holes to progressively larger sizes and go from there.
Big D did you try it before? can you explain more pls
@@qawsedrf7678 Same concept as the video, but easier to modify.
Big D oh i thought going through the hinges😬😂 thanks
@@qawsedrf7678 Yes, going through the holes.
Ah, great idea!
Lightly sand those saw-cut ends to a slight taper. Makes for a much cleaner and easier fit. Wonderful content, very nice presentation style!
very nice presentation style!
Так то молодец, но это ещё проще делается, одно отверстие сквозное, рядом с ним глухое, отверстия должны пересекаться на 1/3 или 1/4 а потом так же крутишь шуриком и все ок, края глухого отверстия снимают лишнее. Пользуйся, это способ в разы проще и быстрее.
Зачем заебываться, когда взял плашку нужного размера и не ебешь себе мозги. Зачем выдумывать, когда есть методы, которым сто лет в обед и они удобные
а не сложно сверлить два перекрывающихся отверстия? Сверло не ползет?
Great work
absolutely love your channel and work.
Good job 😀😀
GREAT IDEA NICE JOB... THANK YOU... POR COMPARTIR.
Meu amigo show de bola está ferramenta e ótima apresentação sua só faltou acionar as MEDIDAS mas muito obrigado VALEU
Very good job thanks 🙏
La idea muy buena solo falta hacerle al menos un canal al tarugo para el aire y la cola
Simply one of the best youtube channel.
遂にダボも自作！
メリットもあって良いですね。
壁掛けの丸ノコに固定すると、加工も捗りそう。
30 years ago, I did...and 29 years ago already ran through a die for carving...the result is amazing..!!!
Agree
Bom dia. Sua precisão é ótima. É um prazer ver você trabalhar. Parabéns.
Excelente trabajo amigo 👌 podrás darme el link Del video de como izo la prensa que usas por favor muchas gracias
Отлично, теперь можно делать стрелы)
I’m making this tomorrow :) many thanks
Всё гениальное - просто.
Особенно с хорошим дорогим инструментом.
Nice👍
Thanks for the video, Sir.
Great work!
Brilliant...!
Thank you.
That's amazing...thanks so much for your video, goodluck and get successful. Best regards from Indonesia
Sooo helpful...thank u bro God bless u more
Com uma ferramenta dessa não suja nem as mãos, nota dez se eu pudesse eu tinga todas.
Mantab bos from Indonesia
Nice Job. Thanks for sharing. ;-)
Gostei muito do seu trabalho meu amigo, realmente simplificou muito fazendo desta maneira... Parabéns e forte abraço... 🛠️👍🏼
Gostei do vídeo
عمل رائع احسنت 👍🏻
Well done. As usually
I'm want to make one. 🙏🏼👍🏻
Uma boa ideia, parabéns. Fortaleza, Brasil.
Esta buenicimo
Nice, I made one by scrap iron
Хороший способ! Все очень аккуратно.
Только сделано все наоборот и рассчитано для движения против часовой стрелки. Если делать все зеркально, то будет нормально. У нас делают немного по другому.
@@MxSoM реверс кому ?
Инструмент позволяет.
Great and wonderful ideas and amazing but why not showing measurement and please some talking will be great yo.
Берёшь плашку нужного размера и прогоняешь таким же способом. Получается даже лучше, клеится и вбивается прочнее.
WICKED COOL little chop saw that you made there!
(EDIT) AWESOME handmade tools in general! ! ! You ROCK !
C très très jolie bravo et merci
Красавчик друг. Thanks
Amazing
As a second thought:
If it were made from angle iron or steel, the jig wouldn't deform as it did at 3:24. The material used here was "Black iron" or known in France as «Laminé». A more serviceable result might be obtained using "Bright steel" known in France as «Étiré».
Really helpful bro
Super 👍
Show!!..👏🏾👏🏾
Super bueno
You dont need the split in the hole, but drilling an undersized hole then using a reemer to take it to finnish size will give you a better finnish on your dowls.
I guess there are a dozen ways to bake a potato this is one of the ways to make a dowl . As cheap as dowls are unless your using some special material in wood then this is an option.
But let's understand the use for a dowl on a joint. Lets say you pound this into a screw hole to hold a door frame hing screw thats long grain to end grain joint
Like using a golf T its not going to be a very strong joint. Your better off a long grain to long grain patch over a larger area it will have more strength.
As end grain sucks up glue befor it can bond properly.
A dowl to hold end grain to end grain works but a wider long grain surface will be stronger like the difference of a dowl
And dimino the festool dimino has more long grain surface area.
A spline joint would be stronger.
Dowls have there uses, and they can look good on a project.
Work with the wood and dont fight its properties and your project will last longer.
Nice stuff.
Had to subscribe after watching the video for just a minute .
The fastest subscribe so far by me
😉
Un accesorio más para el taller. Perfecto.
En los extremos de las clavijas o tarugos, vale la pena pasarlos por la lijadora y hacerles un bisel, eso ayuda a que entren con más facilidad en los agujeros.
Gracias.
Very good.
Все класс а стенку не жалко от искр
Самый простой и быстрый способ как сделать деревянный дюбель-шкант Который я придумал это- взять лерку для нарезания резьбы по металлу с отверстием под размер шканта зафиксировать её в тисках потом квадратную заготовку в дрель и прогнать через лерку туда обратно на выходе будет отличный шкант круглый и шершавый самое то для клея
))))))))) нет слов!!!! чтобы сделать круглую палочку нужно потратить всего несколько минут. а не половину дня на приспособления. все намного проще
I bit of sanding (round over) of the dowels edges will help allot
On smaller dowels, an old pencil sharpener does a great job of this. Just bevel the edge slightly.
@@6thmichcav262 yes
Buena idea.
Without an alignment block ahead of the cutter to keep the dowel concentric you're going to produce undersized owls as your angle is not precisely axial. If you look at the other dowel cutting designs they incorporate this for good reason.
確かに、ダボも作れると作業も設計もやり易いですよね！
素晴らしい！自分も真似させていただきます！
I like your handmade or custom made tools and attachment to use a simple tool like hand grinder became Miter saw
عمل متقن 👍
If you put masking tape around the dowel before cutting to size , it will prevent the messy splintered end .
ありがとうございます。これが知りたかったので嬉しいです。
Wow great idea, wow your slow as a snail, got any paint drying videos? Hahahaha, your good
Yeees goood