Trimming Pottery 101
HTML-код
- Опубликовано: 11 июл 2024
- I have a very particular way of trimming pots, developed over almost 15 years of making. In this video, I want to discuss that approach, show my techniques, and talk about subtle tips and tricks that help the process of turning and finish pots at the leather hard stage.
🌫 • YSP EXHIBITION INFORMATION: ysp.org.uk/whats-on/exhibitio...
📖 • ORDER MY BOOK: geni.us/bymyhands (AVAILABLE NOW IN THE UK - 14/11/23 IN 🇺🇸)
If you'd like to watch the other parts of this series, which demonstrate how to make a pot, you can find them here:
Part 1: How to centre the clay: • How to Center Clay - A...
Part 2: How to open up and form the base: • How to Open Up Centred...
Part 3: How to pull up the walls: • How to Pull Up The Wal...
Part 4: How to lift pots off the wheel: • How to Lift Pots Off t...
Part 5: How to throw a bowl: • How to Throw a Pottery...
The spinner I use is made by Richard Carter: / richardcarter6952 , if you DM him he'll sell you one! (I'm not sponsored in anyway to advertise his tools, you guys just ask so much it's worth putting it here).
Timecodes:
0:00 - Introduction
0:38 - The clays condition...
1:18 - Assessing the pot's weight before trimming
1:54 - How to centre the pot / how to TAP centre
5:20 - How to slip the pot onto the wheel
6:09 - Discussing turning tools (steel)
6:34 - How to hold the turning tool
7:31 - Finishing the inside of the pot
9:55 - How to remove the pot from the wheel
11:24 - Using a 'spinner' to hold the pot down
11:52 - Discussing turning tools (tungsten carbide)
13:20 - How to secure the pot in place with clay
14:18 - Trimming the outside walls of the bowl
16:20 - Finishing the foot of the bowl
20:03 - The finished vessel
21:05 - CLEAN UP
•
Find out much more via the link below!
linktr.ee/floriangadsby
•
Get in touch here: www.floriangadsby.com/contact
Sign up to my newsletter here: www.floriangadsby.com/newsletter - Хобби