Axle Housing welding repairs
HTML-код
- Опубликовано: 2 июн 2023
- Hey guys, I know its been a while since my last post. Had a lot going on. I have about 3 videos that are now in line for editing. Hopefully I can get to them soon. Thank you for the support and I hope you pick up a few pointers from this post. Kick back, relax and break out your favorite drink or snack.
Развлечения
That’s my axle housing. Thank you for the work did, in a relatively short turnaround. Our 66 IH Pickup is back on the road!
Oh, excellent. Please let me know if anything comes up.
The pinion gear had a fight with the ring gear.....did anybody win? Well I guess that's a matter of a pinion. 🤦♂
Ha. good one!
@@ICWeld It doesn't come anywhere remotely as good as your welding Isaac, not even in the same Galaxy. You sir are *tres magnifique!* 👍👍
The welder won, that's who
Lol
Hah!
Your preheat is about the most simple and thorough heat method have seen.
It's always refreshing to see a professional show how versatile stick welding is rather than showing off the new $2k million settings mig everything machine, MIG has it's place in the production world but I don't see much use for it on small projects.
Keep on fixing the junk 👍
If you're looking for through-wall defects you can put dye on one side and developer on the other. After whatever dwell time suits you, you can process the dye as per normal to check that side for indications too.
Man, i started getting withdraw symptoms and ptsd from not seeing any new videos lately. 😂 great content as always.
not to worry, I have more in the lineup
@@ICWeld We all missed you Isaac!
You are so humble. Most youtubers would have claimed that they did grind the hole into the housing on purpose and give some obscure reason. You admit: it stinks. Admitting mistakes shows true mastership.
As soon as I saw you set this axle on your horses I thought of Bare Knuckle Binder. Now I'll watch your video and find out, enjoy all of your content Isaac . Easy going pleasant manner and great tips. Best regards, mjm
Well, He DID bring it to me.😄😄😄. It was for a buddy of his.
Fantastic repair ISAAC! Loved how you laid in the short welds, then peened with the needle scaler to relieve stress. None of those crazy; “ping, pop, uh oh noises.😉 I’m always humbled and schooled by your repair and fabrication skills. ⭐️⭐️⭐️⭐️⭐️
Isaac or Arustydodge - Why the short 1 second welds? Keep the heat down? Better looking "dimes"? Thin material? Filling the gap?
@@markhelseth253 as a hobbyist welder I’ve found that the short welds are to avoid adding too much heat and to keep the arc from burning to long in an area and putting a hole in your parent material. Heat accumulation makes you need less arc time the longer you weld and trust me on this (you will burn holes in the parent material.) when you vaporize the parent material because you were impatient (I’ve done it the 3/16” plate with too much amps) you make your job that much harder. Welding is definitely a science and learned skill. Tables and charts get you close but experience trumps the book and anybody’s videos. Each situation is unique for thickness, condition, etc. So the good old noggin used to evaluate what’s happening right in front as you weld is critical. I’m a quick learner and have been humbled by the welding processes. I love watching I C Weld, CEE Engineering, and of course Jody from Welding Tips and Tricks.
Great video, glad to see new content from you! Almost looked like a vertical crack above the pinion bore on the inside.
thought t he same thing. Would be fitting considering the opposing force and damage.
Sometimes when doing unusual projects like this cast piece, you just have to go with a gorilla weld to make it all work out. Nice job Isaac.
I love it when the internet tells you that Cast Iron CANNOT be welded LOL
Years ago I was restoring an old drill press, the table had a "Smile of shame" on it multiple holes drilled into the table of the drill press in an arc shape.
I talked to a couple of old timers and they said to just grind it out so there was fresh metal showing and heat it up to the point where water would dance on it like a frying pan, then weld it. After I welded it with a MIG gas welder I peened the welds with a small ballpeen hammer then wrapped the table in blankets and let it cool off, I then ground it flat and you can barely see where it was welded. Its been crack free for about 15 years or so now.
Great video, I really enjoy your content.
Cheer from Tokyo!
Thats a good pointer. Heating it like a frying pan., Nice.
Isaac, I was on a job where we had to clean equipment that was involved in food manufacturing, and the final step was to sterilize the equipment with a similar heater. It did the job, but the fumes weren't good.
What is evident is the 'touch' by fingers to transmit additional and required info to the brain. Superb teaching IC!
Welcome back! One of three of my favorite professional repair persons. Keep up the awesome work and videos!👍👍👍
Who are your other two Favs? I'd like to check them out.
I’m betting one is CEE, and another is either Eric O or Ivan(pine hollow auto diag)
CEE and snowball engineering i reckon.
@@ICWeld 😁😁
@@lolzlarkin3059 Snowball Engineering is awesome!
That is some good info for us poor folk that can't afford to just go out and buy another housing. Well done.
Unless you did everything yourself, It probably would be cheaper to buy a used rear end if one is available.
Thank you for sharing Isaac. When you do the tough jobs I learn.😊😊😊
Always learn something. One of my favorite RUclips channels.
I appreciate that!
Fantastic fix, keeping old iron out of the scrap yard.
Another fantastic video Isaac. Your attention to detail and careful preparation of the job is what I think sets you apart from the average "rod burner" out there. I was thinking as I watched your video that even though I live a little over 1000 miles from your city if I had a job that required precise and careful work it would almost be worth it for me to take it to you. Great job on the welding and the video too.
I started out welding donkeys years ago with a tombstone stick welder & back then, rods were like gold-dust where we lived. You thought long & hard about how you were best going to burn that rod because they were in far from endless supply & 6013 was all you could get hold of. 1mm bodywork? Stick weld. Cast iron? Stick weld. Chassis repairs? Stick. With 2.5 or 3.2 6013. If you had 10 rods to hand, that was "Loads of rods" lol - now we have boxes of 200's laying about & taken for granted.
I gradually got loads Posher & got Tig & good Mig machines - for mobile stuff, big diesels running stick & small , light posh Mig machines for site use. I still use Mig & flux core wire machines all day for work. There is however a certain satisfaction in being able to pick up an absolutely boggo stick machine & still be able to weld pretty much anything that arises.
Now & then - just to stay able - I grab the stick machine (admittedly unrecognisable compared to the machines we used have) & use it to do stuff, just for the hell of it. One bit of "progress" I can't live without tho, is an auto-darkening mask - today I was mucking about welding some 1mm sheet I should have migged, using 2.5mm rods just "because" - a shiny new flip-front non-auto mask was in a box on a shelf, so I grabbed that too. How crap was it using the flip-front mask? All the crap. It got chucked aside pretty fast. How crap was it welding 1mm steel using stick? Not crap at all - nice & easy - just not with the flip-mask... Autodarkening is one bit of progress I highly approve of.
I've used both TIG and E7018 for repairs to truck axles. Both have worked well. And to the people, who are asking about not drilling holes at the ends of the cracks. This wasn't a stress crack. So no need to put more holes to fill.
All cracks are stress cracks.
@@ShainAndrews Yep, some kind of stress caused the crack, I agree with you.😀
@@user-kh2yl6nn3l You speak of cast as a material, when it is a process. One has to know the metallurgy to some extent. Steel, vs iron, vs aluminum, vs bronze, brass, etc. All can be cast and each has a preferred repair process.
@@ShainAndrews Not getting your problem ... I know about cast steel, and various casting procedures . A differential pretty much the same metallurgy as a cyl. block being it has nickel in it to one extent or another . None of that has anything to do with my post . True, cast steel has less chance for your weld to chase the crack . But cast iron has all kinds of possibilities for the crack to wander and cheap grey iron (not a dif.) is next to impossible to work with . Hence the reason no one will take a job of repairing that material by welding . Just JB and cross fingers . lol
As for the casting "process"... This ain't my first rodeo I'm 66 and been around mechanical means for my whole life .
The reason I like Isaac and the man from over the big pond Kurtis . I just had a difference in procedure than Isaac this time, but it looks like it all worked out fine . I'm sure Isaac didn't mind a little constructive criticism . Don't assume you're the sharpest tool in the shed . I don't, there's always some third grader that has me beat . lol
Anyway you look at it, Issac made it look easy.
I hate it when other peoples real lives interfere with my free entertainment! 🤣 LOL Thanks so much for sharing your skills and expertise whenever you can. Stay safe and focus on what is important first. Be Blessed!!!!!!
Hello from Alabama my friend greatly enjoy your videos.
Thank you for lowering the sound of the loud noisy processes! That makes the video much better. Great job.
Had a similar axle issue one time but caught it early on a 1970s Autocar flat bed with a 38k lbs boring mill on the back coming south in hwy87 middle of the night from Odessa about halfway to San Angelo outside of sterling city. Middle of nowhere. The housing on the rearmost Rockwell sqhd axle was carrying most of the weight unfortunately and it bent the housing thus pinion alignment began to fail. Had a buddy from near Lamesa come with his SA200 and torch and we cut out a ancillary 8” c channel crossmember from the bed and welded in a giant gusset with it across the top of axle. Used a 10 ton portapower and a 20ton sears jack and some chains to roughly straighten the axle before welding gusset in. Made it back to east of Austin.
wow!!
Sheetmetal thickness gauge: basically a C or U - shaped frame with an pointed anvil and a 1” travel indicator. Handy for measuring thickness on deep features.
You can also use a pair of vise grip C clamp pliers. Adjust the rear screw until it touches the wall thickness, remove from around the housing, close them up and measure the gap when the pliers are closed.
Nice repair Sir, look forward to yor content, always informative. Keep well.
Great job! As my grandpa would say” looks like the bull gear jumped the heifer shaft”. Thanks for the content.
A trick I learned yrs ago if I dont have any ni99 rods is to heat it to 450 or so, weld it up with .035 plain wire and then peen the crap out of it afterward then let slow cool overnight. Thats how I do my axle knuckles when I want to armor them, havent had a set fall apart yet.
I've run a small handrail/fire escape fab shop for a few years and welded all kinds of stuff for years prior, BUT I ALWAYS learn something valuable in every video I C Weld posts up. Maybe just a little trick or maybe something really significant, but no matter what I learn something watching these videos. Thank you good sir. I appreciate it very much.
LOL 😂 so sometimes I’m 12. That inner bead looks familiar. Hahaha
Thanks Issac for real tho on the great tips man. I do some of the same work here in Reno that you do in Texas. And is because of you I have become a better equipment welder.
Say Hi to Juan Ibarra for me if you see him in town.
Thanks for the video Issac nicely done with the fix. Take care of yourself and family and be Blessed ❤️❤️.
Nice work there young man . Great to see an experienced man admit it aint pretty but it'll hold. I'm sure there's a fair few of us here that are happy what we weld holds together and ain't pretty but definitely functional. Great idea on the explanation of welding inside first and reasons on why stick and not mig . Great to see more of your skill and another video . Looking forwards to your next one on whatever it is . Never get disappointed with your videos always an explanation and description on the hows and whys . Thanks
I like the pulse setting on your stick machine😂. Works well!
I saw farmer weld axle on pick up same what you did due overload with seed bag from grain supply.thank educate people about repair.
Hi Isaac 😊 good to see you again mate, nice job on the repair, thanks for your time and efforts, stay safe, best wishe's to you and your's, Stuart UK.
Nice to see someone in North America still has old school skill to repair almost anything. Those skills are mostly seen over seas in India Pakistan and Asian. Nice work sir!!!
Another great repair Isaac!
I stick with the stick , so I always appreciate the masterclasses you give.
The Picasso of metal working😊
Great job Isaac .Plenty of welding inspectors commenting on this one 😂
I would have drilled a small hole at the end of the crack, to alleviate the chance of the crack progressing in future. Heating up the whole casting is, in my opinion, the best thing to slow down the cooling rate of your weld. Stick welding with high graphite flux rods is the best approach, keeping the amps down to avoid undercutting the weld. At the end of the day we all have our own methods to producing the best weld we can. I've TIG brazed cast iron, when the section was thin and using reduced amps to avoid melting the base material. Good post, thank you 👍
Heat, cool, heat cool my dad always pounded that into my head when messing this this stuff.
Some serious skills Isaac! Nice job 👍 👍
very nice repair, thanks for the lesson
Thank you for the great content.
nice vid, love that little advice at the end!
Great job, your work is always exemplary.
Wow amazing repair Issac!
Thanks for sharing another repair from the masters seat. We enjoy looking over your shoulder and the special details you bring to us through your videos.
The heater works now that you disabled the computer. Nice repair on the rear end I always learn something from you Thanks .
Dana 44s are know for the pinion nut coming loose. Put locktite on the bolt. Ive rebuilt a few on the dodge ram i used to own. Rebuilt the original one after that happened, and then had to replace it when the bearings gave out. Put in a fully rebuilt one, just to shred bearings a month later. Im tough on trucks
Always a pleasure to see you weld, Isaac!
Another job well done !! Thanks for posting this Isaac . always enjoy your techniques .
Very nice repair.
Thanks for sharing. 👍
Fantastic repair 👌
very nice job . enjoy the videos .
A pleasure to watch Isaac
As always.
Good information I have been wondering about welding on and you have good ideas thank you
Another interesting project, thanks for sharing Issac.
Thank you for share your experience and i learn a lot 👍👍👍👍
Great Repair !! 🤗
Awsome video.
Thanks for sharing
Safe travels
Keep on rockin, Isacc. 🇺🇸🇺🇸🇺🇸🇺🇸
I keep watching for your videos, glad to see you posting again .
Really, really interesting, thank you 👍
I am happy to see you back. Your video's are very educational
Nice to see a new video hope all is well on your end. Most people think they can weld,first thing they do is grab the welder and go.they don’t prep before hand which is a huge mistake. Watched a young buck grab the welder and go to town his welds looked great but failed do to contamination in the welds. Old guy welding the same style of part welds not so great but still good passed do to prep.
How the Lincoln locker was born !
Very nice work as always !! I am completely confident this will hold you are very thorough in your .....you did everything you could possible do and in my opinon you did it very nice work !!
As I always say about your jobs great job
Best videos on RUclips! I alway learn something! Isaac your great at what you do, and even better at teaching and sharing!
Ok, finally got to watch this one! Looks good. I need to hit a junkyard and get some scrap items to practice on with the kids. Thanks for the Arc Gouging Demo, and enjoy the new machine.
Thank you for the video. Thank you Sir
Thanks Issac. I've never seen a repair of this type. Good idea on the diesel for leak.finds.
As always great video.
Long time off. Good for you. Funny i only know stick welding. Never have tried anything else. Im just an around the farm welder.
I'm having flashbacks to last month, where I did this on a D44 axle for a WJ Jeep. "Fun" job. You had less trouble than I did!
Great job as always. When I was younger use to weld up spider gears full time posi in the rear and when you locked in your hubs in the front had posi.
Another great video Sir
Awsum bud, gud teaching my fren..I enjoy ur vidz..
Nice job! Very good preparation. Nice results! BTW.. This axle looks like the Dana axle from my old volvo 740 diesel. 😊
Good video and info as always. I've always noticed the plug welds for the axle tubes and wondered about this. Now we know. Thank you. Hopefully I never crack one.
Great to see a new video. Always interesting to see cast iron repairs. I would have terminated the holes by drilling them at their ends but followed what you did other than that. Top stuff.
D44 housing is cast steel.
I've noticed a lot of people not preheating cast like that, and I don't understand why they wouldn't. Awesome job! I greatly enjoyed it as usual! Stay safe, and God bless
The things i learn ,Stick welding can be used for more than some farm welder. thank you sir
ah you need some figure 8 calipers to measure that thickness.
Thanks for sharing
Great Video Thanks!!👍👍
Nice video. Interesting to see how it's done on the other continent. Mostely, when the piece is heated up, you can weld continiousely withouth needeling. I'm needeling only when the piece is too big for heating. Anyway, thanks for your video's.
very nice work
I love using bronze, in this application I would drilled small holes whether it was a stress cracks or not and then preheat, bronze, post heat. I love that grinding afterwards is so clean and efficient. It is the shadow and using the shadow is what makes my day. Heh, heh.😂
Ditto
good to see u again, hello from Argentina
Nice…
I used to weld snapped fork lift tynes back together…
..preheat..weld ..wrap in asbestos blanket…😵💫
Great job 👏
Awesome I learned something new again. Now I need an excuse to buy a heater😄
Welder: "This is crazy hot. You don't wanna touch it"
While bare hand touching it.😂😂
👍👍👍
Excellent!
Well done 👍
Nice work❤