Pepetools LPFG how-to Foredom h15 hammer instructions unboxing setting up basic engraving technique
HTML-код
- Опубликовано: 24 июл 2024
- Pepetools LPFG how-to Foredom h15 hammer instructions unboxing setting up basic engraving technique
How to set up put together and use you new engraving adapter
this uses the foredom hammer hand piece H.15 or other hammers on the market this will allow small scale artist to try out power engraving without having to break the bank!
Tools
Rolling mills
90MM Combination Ultra Mill with Ductile Frame
pepetools.com/collections/man...
160MM Combination Ultra Mill with Ductile Frame
pepetools.com/collections/man...
130MM Combination Ultra Mill with Ductile Frame
pepetools.com/collections/man...
160MM Double Ultra Series X-Drive Electric Rolling Mill (All Wire + Flat)
pepetools.com/collections/ele...
Rolling mill Care
CRC 3-36 Multi-Purpose Lubricant and Corrosion Inhibitor
amzn.to/3caqSar
Soldering
Stay cool soldering pick
pepetools.com/collections/ben...
3 Pack Titanium solder picks
pepetools.com/products/titani...
Cutting
Pepetools Oval Disk Cutter
pepetools.com/collections/new...
Pepetools Round Disk Cutter
pepetools.com/collections/cut...
Brass Hammer 2LB
pepetools.com/collections/acc...
4” Guillotine Shear
pepetools.com/collections/ben...
6” Guillotine Shear
pepetools.com/collections/ben...
Forming
Pepetools Ring Bender
pepetools.com/collections/ben...
Dapping set
pepetools.com/collections/dap...
Dapping block
pepetools.com/collections/dap...
Bezel Mandrels
pepetools.com/collections/bez...
Mandrels
pepetools.com/collections/man...
Bangle Bracelet Stretcher
pepetools.com/collections/ben...
Ring stretcher
pepetools.com/collections/new...
Flex Shaft
Basic Foredom Kit
pepetools.com/collections/acc...
Motor hanger
pepetools.com/collections/acc...
H.15 Hammer
pepetools.com/collections/acc...
H.15 Hammer Anvils
pepetools.com/collections/acc...
Jump Ring Maker
pepetools.com/collections/ben...
LPFG Engraving adapter
pepetools.com/collections/acc...
pepetools.com/collections/acc... Хобби
Glad to see you’ve added the grub screw. Bought mine tonight and that was going to be my first mod. Thanks and I’m looking forward to using this product.👍
OH thank you so much for making this it is super helpful for a beginner
Vielen Dank - sehr informativ - große Hilfe für Anfänger
Danke Frau
Hi there! How cool is this??!! Thanks so much! I have been trying to figure out how to adapt some my tools to my new hammer handpiece for the last week. Great you already invented the exact thing I was wishing to have! Now I am wondering, the tool I want to adapt is a milgrain. What are your thoughts about it?. Do you think this adaptor could work for this? have you try it with milgrain tools? or heard of someone that use this tool for milgrain details? I really appreciate any input! Thanks!
Hey Laura! I have used milgrain tools using this adapter - the only issue I can see is that you would have to use the longer screw that comes with the adapter- since milgrain tools normally have a smaller diameter shank!
New video on the LPFG is out
Hello. Can you use the Grs gravers with it? Many thanks. Jess
Yes you can, the ones for the QC Adapters are awesome. You will have to round over the corners slightly to fit into the 1/8 round hole- but I use and love them.
@@LionPunchForgeLPF thanks.
Last question, sorry. My Foredom hammer piece is the H15. Will it be compatible? Many thanks! Jess
Jesus Marrero Hernández yes it will!
@@LionPunchForgeLPF Thanks so much!
Will this only work on foredom flex shaft?
No, it will Also work with all flexshafts that use the a keyed shaft. You will need a hammer hand peice but as long as it accepts keyed hand pieces same as the foredom you are good
It's like 3 feet long do you find it hard to control?
It’s very controllable - I’ve engraved entire rings pendants and other items like steel, plastic, copper, brass and wood.
Just got my LPFG from PEPETOOLS today, and the graver, (labeled PEPETOOLS #4SQGR), won't fit in even with the set screw removed. It won't even get all of the tapered end in. It only slides in about 1.4mm. I measured flat to flat on the graver, and it's 2.2mm both ways. You say on here it fits 2mm, so is the graver just too big or am I doing something wrong?
Have you contacted Pepe about the gravers ? They should fit . If you have a chance send me some Pictures
@@LionPunchForgeLPF I had already sent an email to them with a picture and while they haven't directly replied to me, about a minute ago I got an email from them acknowledging an order for a graver for $10.00 which made me think wtf until I looked farther down and it had a $10 discount didn't fit line! So apparently they're sending me the right one. I could just grind this one down to 2mm no big deal, but I though pepe would want to know, you know? Turns out they wasted no time.
If there are any further issues reach out! I’m glad it’s being remedied for the moment
Hey Patrick I wanted to touch base with you again- I have looked into this further and there were indeed some gravers sent out of improper size- this is being remedied and I wanted to let you know I take full responsibility of this oversight and will be working diligently I make sure it doesn’t happen again. Respectfully - Chris
@@LionPunchForgeLPF that's cool beans, like I said, I could just grind it down I just wanted them to know they sent out the wrong size. Still haven't received the right one but when I do, fun will happy:)
Can you shorten the tip ? Thank you !
Just bought this adaptor to go with a Foredom h.15, and it doesn’t fit. The thread isn’t the right size. And the adaptor is brass, which I haven’t seen in any online photos. We bought it from a shop here in Australia. Just wondering if anyone has come across this, or if we were sold a fake???
We do sell a gold titanium coated version. We have come across this issue before with counterfeit hammer handpeices feel free to reach out to me at lionpunchforge@gmail.com if you need more help
@@LionPunchForgeLPF thank you. The hand piece isn’t counterfeit - it was purchased from Foredom. Perhaps the adaptor we got is a gold coated version. The thread doesn’t fit though. Perhaps it’s just a slight manufacturing fault?? The thread difference is 2 thou of an inch. Why the change to titanium nitride?
Sent me some pictures to the email
Is listed
Hi Chris, just got my engraving adapter and it came with two small washers and two tiny coils. What are they for?
Lori Yarrow those are for placing between the adapter and the hammer- to reduce the stroke of the hammer Sandi Sturgon found this to produce more accurate experience learning to engrave
@@LionPunchForgeLPF Thank you!
@@LionPunchForgeLPF Mine came with 3 metal washers and one plastic. Should I use all of them? Should the plastic one go closer to the adapter or the hand piece? Thank you :)
Correction 5 metal washers and 1 plastic
As the product development continued we adapted the kit itself to improve use ability- Ann I think you got the most recent version
Video is sooo quiet.. Everything else plays very loud, max volume, barely hear you.
Dimana saya bisa mendapatkan PEPETOOLS
apakah kamu di indonesia
@@LionPunchForgeLPF ya saya diindonesia
berikut adalah cara memesan dan mengirim dari USA. Saya ingin melihat apakah ada dealer terdekat pepetools.com?aff=14
di sini adalah vendor di Australia- www.cjservice.com.au
Ok thankyou very much
Please check your audio level...can barely hear many parts..thanks
I just now got some updated camera and audio equipment! I’m excited to level up both images and audio