Add Detail to Your Work With This Cheap $65 Engraving Adapter
HTML-код
- Опубликовано: 4 июн 2020
- Engraver & Handpiece:
Engraving Adapter - bit.ly/EngravingAdapter
H.15 Hammer Handpiece - bit.ly/h15hammer
H.15D Hammer Handpiece - bit.ly/PepeH15D
Amazon H.15 Hammer Handpiece - amzn.to/2A1KDDa
Amazon H.15D Hammer Handpiece - amzn.to/3eOM9rd
Combo Kits (Save some money if you don't already have the other tools):
Everything You Need Starter Engraving Kit - bit.ly/EngravingStarterKit
H15 With Engraving Adapter - bit.ly/H15withAdapter
H15D With Engraving Adapter - bit.ly/H15DwithAdapter
Foredom Classic Jewelers Kit with H.30 Handpiece - bit.ly/K2230
Engraving Balls & Blocks:
Cheap 5" Engraving Block - amzn.to/2zWqG0O
Expensive 6" Engraving Block - bit.ly/6inEngravingBlock
Misc Other Helpful Tools:
Lions Claw Solder Tool - bit.ly/LionsClawSolderTool
Fixturing Compound aka Moldable Plastic Pellets - amzn.to/2XxfUHg
Use this link will get a free trail of Skillshare Premium and help support the channel:
bit.ly/GomeowCreationsSkillShare
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
GomeowCreations.com/tools-and...
GomeowCreations.com/partners-...
________________________________________________
My PATREON ➜ / gomeowcreations
One time support ➜ paypal.me/gomeowcreations
________________________________________________
Instagram ➜ / gomeowcreations
Facebook ➜ / gomeowcreations
________________________________________________
#engraving #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy 
Хобби
Hi Randy! I love this, you are so fab. I really ENJOY the WAY you teach. You succeed in making the student (me) feel on a equal level, there's no arrogance in your teaching, so refreshing! I have this tool, bought recently, but I haven't tried it yet. This is exactly the video I was hoping for, and from the right guide, thank you.
Engraver & Handpiece:
Engraving Adapter - bit.ly/EngravingAdapter
H.15 Hammer Handpiece - bit.ly/h15hammer
H.15D Hammer Handpiece - bit.ly/PepeH15D
Amazon H.15 Hammer Handpiece - amzn.to/2A1KDDa
Amazon H.15D Hammer Handpiece - amzn.to/3eOM9rd
Combo Kits (Save some money if you don't already have the other tools):
Everything You Need Starter Engraving Kit - bit.ly/EngravingStarterKit
H15 With Engraving Adapter - bit.ly/H15withAdapter
H15D With Engraving Adapter - bit.ly/H15DwithAdapter
Foredom Classic Jewelers Kit with H.30 Handpiece - bit.ly/K2230
Engraving Balls & Blocks:
Cheap 5" Engraving Block - amzn.to/2zWqG0O
Expensive 6" Engraving Block - bit.ly/6inEngravingBlock
Misc Other Helpful Tools:
Lions Claw Solder Tool - bit.ly/LionsClawSolderTool
Fixturing Compound aka Moldable Plastic Pellets - amzn.to/2XxfUHg
Use this link will get a free trail of Skillshare Premium and help support the channel:
bit.ly/GomeowCreationsSkillShare
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that and I'm updating all the time so bookmark it to stay up to date:
GomeowCreations.com/tools-and-materials
GomeowCreations.com/partners-discount-codes
________________________________________________
My PATREON ➜ patreon.com/GomeowCreations
One time support ➜ paypal.me/gomeowcreations
________________________________________________
Instagram ➜ instagram.com/gomeowcreations/
Facebook ➜ facebook.com/GomeowCreations/
________________________________________________
#engraving #jewellerymaking #jewelrymaking #goldmaking #silversmithing #diy #gomeowcreations
Dßß sees szzzzzzzzzzzzzzzzzzzz szzzzzzzzzzzzzzzzzzzz canzzzzzzzzszzzzz xx xx
What about the graver you used, where did you get that and what sort is it? Do you need multiple graver types or just one??
Thank you for the awesome products and tips with this video! I love watching you create!!!😌
Thanks 😁👍
This is great, thank you for mush for sharing. What video set up do you use? I find getting a good angle for engraving videos is hard
Thanks and here is the list of the stuff I use amzn.to/3dDWciF for recording. I used that mic swing arm to hold the camera.
Great info, thank you!!
Thanks for your videos by the way, they have been so helpful :)
Glad you liked it!
Your content is always so unassuming yet amazing (and useful!). I have Polly Plastic but didn't think of simply melting it and popping it directly onto the work holder.. also, as someone else commented, this setup probably wouldn't work with my beginner's rotary tool (a Wen) but still good to know... Thanks for sharing Randy!
Hi and thanks! Would you use this with an onglette, during the process of moving metal, to raise a bead? (I hope that makes sense: The first part of the process. Not the actual beading step.)
Thanks for the demo
I googled hammer handpiece and Eurotool has one!!! Thank you for this video I did not know they had one. Appreciate you so much.
Thank you so much!
Hooked on your videos and subscribed a while back. I have been looking for a graver that would attach to my hammer handpiece, I figured there has to be such a thing and couldn't find it. It's like your channel is custom made for me.. guess I finally need to check out Pepe tools!
Thanks for all the good work!
Well thank you and I'm happy to hear that I'm making stuff people want to see. 😁👍
I got one of these last year and couldnt get it to work. It would just dig into the metal and hang up, so i quit trying and moved on. Now i see i should have lowered the angle after setting it in initially. I'll have to revisit it and see what it can do. 👍🏻
You can also re cut the tip. Look up how to sharpen a graver
Thanks for another great video
Thank you 😁👍
What vise do you recommend? I don't have one but need one! Do a lot of bezel settings as well.
Thank you for this video. Does this work well enough that you could engrave scrolls?
I would think so but I haven't tried it, I will be working on learn scroll work in the future.
Dude thanks so much for showing me this. This video must be among like a thousand others that my browser wants me to view, but yours actually had a very pertinent advertisement for me. Polly Plastics Sponser this Man!
Haha thanks. I have talked with them a little already but I haven't thought of any other video ideas that would show off their stuff. 😅
Thank you for your hard work where do I buy the engraving tool I already have a flex shaft and I would like to pursue a Purchase
Very informational video!
Can this be used to make bright cuts, or is that better done by hand?
I think you could with the right tips but I have never done it. 😅👍
Ahh, thanks for the video Randy! I didn't think I could find generic versions of Thermal Loc, so you have helped me save a bunch, Cheers!
No problem, I haven't tested them head to head yet but I will be doing that in the future. 😁👍
i always pick up new tips, techniques, or products to check out when i watch one of your videos. thanks.
Just ordered mine ! I got the gold color ? It comes with the flat tip so ,I ordered the one your using . I have used normal engravers ,so this is my 1st try .Thank you for your info very helpful ! 3rd generation jeweler 35yrs hand made jewelry !
Wow gorgeous design. Great tool that I must get
😁👍
How is this adapter for stone setting such as pave etc?
Can you tell me what kind of tool you're riding on a puncture machine?
I have Marathon micoromotor .
Can i install it in my mshin ؟!
So happy I stumbled on to this video
Hi sir , will beading tools fit this adapter to push prongs ?
Maybe?
Thank you so much!
No problem 😁👍
I like that you used this without being an expert . Lots of beginners watch you ! I bought it a while ago not knowing the 1 st thing about engraving . Question: Did you have to prep the graver before ? Sharpen it? or anything ?
It does help to sharpen them a bit
Love videos❤
Hello Randy will this work with the classic Foredom Shaft? I didn’t see this tool attached to anything. Thanks, Michelle
I don't think it does. You might need to reach out to Foredom and ask about that.
Thank you for this video, it was just what I needed! Question: was there any prep to the engraver piece before use? (sharpening of the tip?)
Yeah you should polish then to get a better cut.
@@GomeowCreations could you do a video on that please
@@rparker1998 If you look on RUclips you will see a few...
Where can I get the extra graver kit? What is the paper you use? Where to buy it ? Thanks o much . You were the reason I bought the adapter.
Thanks much
After taking an engraving class, I've been looking for a cheaper alternative. Just purchased. Thank you!
You couldhave bought a pnumatic engraver made for doing this for the same price this costs to convert a dremel. The hammer piece alone is about 180 and then the adapter 65. You can get an entry level pnumatic engraver for just under 200.
you could also get a clone hammer piece for like 20 and make the adapter for like 5 bucks worth of material lol.
Can I use this to do diamond dust
Hey Randy! Thanks for your helpful videos! Can the LPF adapter be used to do bead and bright settings? I’m thinking to purchase one but need to see if the bead and bright can be accomplished.
I honestly don't know seeing that I have never used it for that 😅
@@GomeowCreations ok thanks for the quick reply! I think I’ll buy one and play with it to see if I can make it work.
I'm going to look into it as well but let me know if that works out for you or not
Do you use SR shaft or you have to buy LX one?
I'm just using a SR shaft.
I'm useing my stimulus to buy this to engrave my jewelry! Thank you
Ok cool week if you do use my code "meow" to save $30 on any order over $100 😊👍
@@GomeowCreations thank you!
Very nice.
What’s the vise that he puts it in to keep the piece steady before engraving?
I put links to everything in my descriptions be here you go 😁👍
*Note* You really get what you pay for when it comes to an engraving block.
Cheap 5" Engraving Block $139- amzn.to/2zWqG0O
Expensive 6" Engraving Block $460 - bit.ly/6inEngravingBlock
Fixturing Compound aka Moldable Plastic Pellets $13.95 - amzn.to/2XxfUHg
I have the harbor freight flex shaft do you know if this is compatible?
Honestly I don't know. can the hand piece be removed?
I want to the buy thiseachin pls give me link sir and i want also drillachin for doamond setting
Very nice work! What I wanted to ask is there such a tool for dremel? Thanks
No there isn't a tool like this for the Dremel
@@GomeowCreations thank you!
I like the technique you used, I like the bezel where the stone is set, it's absolutely beautiful.
What I don't like is the decorative shield ornament, but that's just a matter of personal opinion.
Anyway, good work and thanks for sharing this technique ^_^
Thank you very much!
Was that liver of sulfur you used for the patina? Inever get it to look that good on silver
Yeah, this is the stuff I used amzn.to/2APvbtR What I did was take some hot water and added the LOS to it and I just keep the silver moving around in it till it turn dark gray or black.
@@GomeowCreations thank you
I come from a Chinese handmade jewelry factory.i see making that are very cool
Sideways that looks like a crab in seaweed. Can't believe i haven't found you before! Instant subscribe
Well thanks and welcome 😁👍
Plse gime the link sir and wht is the name of tool and machin will you tell me sir
Have you tried thermal lock to hold things in place? I like use it and like it
no I actually haven't I was looking for an alternative and that's when I found this stuff that I used in the video. 😁👍
It’s what I use every day
grs.com/product-category/products/workholding/thermo-loc/
All you need are the sticks and the pad. Works great
what is the engraver attached. can you use your boredom
Maureen Chandler so if I use my boredom, do I have to have the hammer flex chaft. thankyou
Were can I buy the tool for engraving? I already have the other part that I use for stone setting in bezel.
bit.ly/EngravingAdapter this?
I want to buy this machin but i dont know what is the name of this machin
Work on metal/ parts motors?
Absolutely brilliant... Ive always wanted to trying engraving... only problem is I ended up buying the Dremel Foriflex pendant motor instead of the Foredom (it was about 💷£100 cheaper tho 🤑). Although both machines handpieces look identical, you can bet theres a hairs width diference and these wouldnt fit lol. Ive been watching (Instagram) and waiting to see this pendant come together and boy did you bring it to life, fabulous job. The engraving really made it pop. Thats the same Liver of Sulphur I use... has a rather 'unique' smell don't you think? 😖🤭😂hahaha. Sending you hugs from little ole England ❤🧡💛💚💙💜
(As always Thank You x)
Sadly I don't know if this would work with you Dremel FlexShaft but I do have a cheap hanging flexshaft that will fit but the size is a little off so it would pop out. 😅
Thank you for this video,, can I know the name of the yellow adapter you use ?? For engraving ? I have the foredom h15 handpiece. But asking about the yellow part that hold the blades . Thank you
I have links to everything in the description of this video. I have it listed as an engraving adapters. Let me know if you find it or if you have any questions 😊👍
@@GomeowCreations I see it , thank you a lot .
@@GomeowCreations Hi! I don't find the link where I can buy this adaptater 😭
bit.ly/EngravingAdapter
How can anyone not want to watch you . You're I bought a magna graver. Not near as expensive as those high-end ones. If you think about , I'm seeing a older gentleman with a mop and shot pool with it and he was literally the best in the. Get my point great video thank you very much
😊
That polly plastic stuff looks better than pitch. Is it used instead of pitch, or only for certain things?
So the plastic that I used is mostly used to hold stuff in place. So you can used it for stone setting engraving, drilling or just anything they you need not to move. Pitch can be used to do the same thing for the most part but you need the very hard stuff. Pitch is meant more for shaping your metals because it does slowly move.
@@GomeowCreations I've never used pitch. I haven't tried my hand at stone setting yet. Other than w/ a bezel. The plastic looks so much cleaner than pitch, which looks...well, frankly, gross, but I understand it's useful when making chains and stone setting and such. If I had to make a choice, it would be the plastic.
I love the hermit crab vibes of the piece but can we talk about that bezel?! Did you make that or is it a prefab pattern you buy? Its beautiful
That bezel is a prefab that I like to used to make thing look more detailed than they really are haha. 😀
I have an ordinary rotary tool, can I do this with a pointy tool bit? I have one of those in my collection of random bits!
You would need a hammer bit at least, I have a sharp point for the hammer hand piece that I was able to use to engrave a little.
@@GomeowCreations thanks :)
Have you done a video on setting bezels with hammer headpiece? I'll check to find it. Oh, I caught that at the end. Lol
😁👍
You are so good w/ that saw! How long did it take you to get so good. I've been doing this for about 3 years and I'm still struggling w/ the saw. It's one of my least favorite things (actually I f*n dread it every time)
I think it took about 6 months to get to this leave of skill but I have been using them for over 6 years. Honestly it's because of a jeweler saw that I stared making jewelry 😅
@@GomeowCreations I guess we all have our favorite and least favorite things that are necessary in jewelry making. I love the tiny little detailed work; other people hate it.
What kind of fluid u use to darken the silver?
I used this in some hot water amzn.to/2Uc94ov 😁👍
@@GomeowCreations thx i also ordered this amazing gel
Will it work for any other fllexshift
That I know of, it doesn't
@@GomeowCreations Thank you
Will this hook on to a Dremel?
Sadly no.
You just opened up a whole new world! I saw also that you used a tool for setting your bezel, is that more effective than the hand tools?
Yeah this is a very helpful too and setting the bezel with it is a lot easier than doing it by ✋ I have a video about it if your interested.
@@GomeowCreations thanks! Just watched both videos on them!
Cool crab!
Thanks, not at all what I was going for but it is now crab 🦀
Oh sorry. No offense intended. Regardless, it’s a nice piece!
Randy how do you think this would work for bright cuts ?
Who is Brian? Also yeah I think this might work for that but I would have to try it out more to see for sure.
@@GomeowCreations sorry Randy I was watching Brian Barczyk's channel right after yours. Brain fart !
@@GomeowCreations I corrected it.
@@FatKidBrody A reptile fan, too, huh?
I wonder if you could glue a piece of leather on the end of the hammer so it still hammers but not metal to metal? 🤔
Great video Randy, thank you 👍
Wow to order egriving adapter plss tel to me
bit.ly/EngravingAdapter
Just used your code at Pepe to buy my adapter so I hope you earn a bit back for it! Love your videos!
Awesome, thanks for sharing this! Where can I find the discount code you mentioned in the video? I have looked everywhere on hour social media, website, etc. Thanks in advance!
Sadly that discount is not longer available, sorry about that
Bom trabalho
Wow!!!
Thanks 😁
You have ants!
Great video, thank you.
Ants?
Can this be attached to a dremmel cord ???
Sadly no you can't 😅
@@GomeowCreations ., How stable is this tool in your hand compared to an air piston kind of tool when doing fine carving ?., any difference at all ?
Could you add the silver piece onto the moulding section when it is tacky rather than when cold and then having to reheat it? Thanks for this great video , Caz @cazwadejewellery
Yeah I could have done that. I didn't shoot that part of the video the same day I shot the video using the plastic. I was testing it out to make sure it all worked and just recorded it 😁👍
@@GomeowCreations brilliant! Is so much better and more accessable than traditional pitch etc
What if you want to engrave letters or phrases?
You can do it but it will take a lit of skill and time to learn it
GomeowCreations is there a particular tool that is best for the job? I see all these cool handmade necklaces with customized engraving fonts on the pendants.
I tried to purchase and it was over $100 but it did not show a $30 discount. Is there a discount code?
I'm sure the discount is no longer available, sorry about that 😅
That’s too bad, never get that big a discounted from Pepe Tools
it's that stainless steel ?
How much mm ?
Nice video btw
I need some more information on what your are asking about? 😅 If you are taking about the piece that I was engraving on that is 925 silver.
@@GomeowCreations hello :)
what kind of material is ? and the deep ? 1mm , 1.5 mm ?
The metal is sterling silver and the metal was 0.6 mm thick.
GomeowCreations how can I get this metal? I don't see the link to it
where can i buy the engraver please? the plug and go part as i have a dremmel already..
Sadly it will not work with a Dremel
@@GomeowCreations and what can i use then?? Is there any i can plug to a dremmel?
I don't know of one that will work with a Dremel at all. 😓
@@GomeowCreations so basically i need to buy the whole stuff(motor and the end bits)?
Sadly yes, I can get you a link to a full kit if you like and if you do get it you can save $30 on the order with my code but this setup is going to be like $350+ 😅
Is there something like this for dremmel ?
Sadly no
@@GomeowCreations that’s wildly depressing considering I just threw my dremmel rotary tool and flex shaft box away.. so I can’t return it…. I’ve seen this engraver used a lot when setting stones, but hopefully I can get away with what I have for now. Never made jewelry before but I’ve been purchasing everything I need for the craft
Fold the paper and trace from the back, the pencil will leave a ghost impres7that is perfectly mirrored.
Yes that is a good point, thanks I will try that out in the future 😁👍
@@GomeowCreations No problem! My first career before engineering was as a professional tattoo artist for 20 years. There are a lot of really good techniques from tattooing that transfer amazing to jewelry making. Another way you can mirror image perfectly that is a bit quicker is to draw the first half in pencil, fold paper directly in the middle again (with the first half of the drawing inside the folded paper facing the side to be mirrored)then use a pencil with medium press and scribble very fast on the backside of the paper over the drawing to be mirrored. The pencil lead from the first half will transfer a mirrored ghost outline just like the first technique but it is faster and saves a bit of time.
Name of tools?
Look in the description of the video I have links to everything.
Basically you could do this with a Dremel
Well not a Dremel but a Foredom flex shaft
So why cut the holes with a saw instead of drill them?
Well that was because I did have good drill bits in the right sizes 😁👍
What was the drill bit you used for the starter holes?
Whats the discount code
Sadly it no longer works
@@GomeowCreations ok thank you
what's your code?
Sadly I don't think it works any more but you can try it. Use code "meow"
@@GomeowCreations it gives 15$ off now
Odd well that's good
So brilliant that you do these amazing videos, definitely helped me through this difficult worldwide crisis, and given me confidence to try new methods, thank you so much , Caz @cazwadejewellery
My pleasure 😁
❤️🇨🇦
😊
after you put an ad inside the video with ads I
I decided this video has too many ads and I decided not to watch it and not to subscribe to your Channel I can't believe you put an ad inside a video with an you are one greedy son of a bitch
Yeah sadly that is how RUclips work. Ad revenue from videos is really low and has only gotten lower with the stuff going on right now. When it done to the double stacked ad, I have no control over that at all. 😅 I do with I could do videos without ads but as of right now I can't. I hope you understand 😁👍
buy a magnagraver from Ngraver.
Do you have one? Have you made any videos of it in action? I have had the hardest time finding videos of the magnagraver in action. I have this setup and find it way to cumbersome, with the long hammer hand piece, extended even further with the LPFG adapter and graver inserted. I’ve made my own gravers that thread right into the hand piece but the hammer hand piece is still nothing like smooth. Not like an air graver, of course. I’m seriously considering investing in the GRS system, I have just always wanted accurate info on the magmagraver. The foredom power graver setup is another option, but for investing close to $600-650 I think I may as well go for an air engraving setup.
Anyways, thanks for any help if you’re able!
It (magnagraver) is the best low-cost option. I use it still when I need to do heavy hitting and carving away lots of metal. I have an Artisan from Lindsay that I use for the more delicate stuff. The magnagraver doesn't really do the smooth curves you need unless you are good enough with it to run it on full speed while carving. I don't have any videos, though. Sorry.
Clickbait. This setup will cost well over 200. Good job luring people in with clickbait. You can literally buy an entry level pneumatic engraver for the price this would be to convert a dremel.
Sure you can look at it that way I guess. I was talking about the actual engraving bit assuming that you had the other parts like I did.
put some sawdust under stone // ya buried it to far //
Yeah, I should have used some kind of spacers for the stone 😅
:D
👍
Thanks for introducing SkillShare. Actually it was - for me - more useful than your videos 😁
😅
The very least you could do before promoting the freebies you get to advertise is LEARN HOW TO USE THEM!!!!!!!!!!!
What did I do wrong in the video?
@@GomeowCreations At about 5:45 the very first line you attempt takes a few goes and tbh looks messy at best, I've followed you for approximately a couple of years now, (on another channel I no longer use I think
I'm still subscribed) way before you moved and went fulltime with your channel and the reason I
originally subbed was the great and varied content you made and the fact that you mostly used the tools I and most others had or could easily afford, and the work you produced was very good quality.
Since becoming a Pepe tools Rep, IMHO your work quality and freedom to make what you want,
rather than what Pepe Tools send you to promote has suffered as a result!
Plz don't think I'm some jealous hater as I'm way too old for that lol, and If you can make a go of the YT thing Good on ya, but plz take some time to learn how to use whatever product you are promoting before you film and post it, and don't forget what it was that got you the popularity to be deemed a worthy investment in promoting their products! that said I really do wish you success in your goal of becoming a self-sufficient Jeweller :@) Sorry for the lengthy post.
Yeah, you are right that I have been doing a lot of videos using stuff for pepetools.alao yeah, I haven used this tool much but that was kind point of the video. I wanted to show that you could use this with little to no still with it seeing that most people only show off professional engraving but not anything from a beginner.
I do understand your point though, I need to make better quality videos and I'm working on doing that and testing out different editing styles. I hope you understand.
@@GomeowCreations I do understand and again wish you all the best in your efforts to improve, (Which should be our goal in all aspects of life) Ironically I have been looking for some time now for the exact thing you were using!! I need something to engrave the patterns in copper and silver before covering with transparent enamel ( Guilloche or Basse Taille) and air graving machines are too expensive, I checked your link and saw the offer of the H.15 and adapter at a very reasonable price though didn't see how much shipping would be! but will look into it some more.
In the meantime, I'll check out for any future vids that include your improved engraving skills ;@)
Speach and or English skills badly needed.
Hey, are you doing ok? This is the 2nd comment today that you have complained about my work.... This is far from your first comment 2 months ago on this video ruclips.net/video/PPtOXSokMys/видео.html :
"Post a video once per week, dont want to overload the viewers. IDK. PS: Sorry about losing your 90% income. Hang in there, relax, enjoy the time off."
So I wanted to know if thing are ok with you or if need to talk.