Epson Workforce WF-7720 Does Not Recognize Ink Cartridge. Try This!!
HTML-код
- Опубликовано: 19 окт 2022
- Epson Workforce WF-7720 Does Not Recognize Ink Cartridge. When this happens all I do is open the access panel and expose the ink cartridges. I then pull out the ink cartridge that is not being recognized. I reinsert it and close the cover and then close the panel. **(NOTE!!! If you have to do the black ink BE CAREFUL because it does leak. You have to pull the large cartridge out fast and place your finger over the hole at the bottom. The ink will leak out and cause issues with your printing like lines, etc.)**
After you close the panel the printer will ask if you want to continue with the "non genuine ink" and all you do is say ok and go through until it ends. The printer will be ok after that. Just repeat if it happens again. It's so easy.
If you have any questions feel free to comment. Remember to keep your printer as clean as you can. Clean bed where the ink sits with a q-tip to get any extra ink off when you refill your inks.
Follow me on Instagram:
@monstersinktees
I'll also answer questions there.
I'll be giving away designs that I create to my RUclips subscribers. That is coming soon. They are absolutely free!
SUBSCRIBE TODAY!! Хобби
My printer is still giving an error message of an "X" for all ink cartridges. I've refilled the cartridges and added new chips,.. and It's still giving me that same error message, Do you have any suggestions please? can you please advise me another option to this method.
Thank you 🙏🏾 👏🏾👏🏾👏🏾👏🏾
Yea, that won't work on my WF-4830. Wish it would.
big thank you. wow
Having the same issue after I cleaned my print heads... I was able to get it to read all but the magenta cartridge. I took the cartridges out and then turned the printer off. It allowed the system to reset overnight. In the morning I turned on the printer and reloaded the cartridges. I am at a loss for the magenta cartridge. I wish I hadn't thrown away the old ones that were empty. I saw online that if you replace the old cartridge that worked and allowed the printer to read the cartridge and then take it out the printer should be able to read the new cartridge. I threw mine away tho.That is the only fix I haven't tried.
All of my cartridges are not recognized... Does it have anything to do with the new firmware download?
Possibly. Try taking one cartridge out. Shut lid and see if all are X out on the screen.
Thanks Angelica. @@angelicareyes595
tried but didnt work, its happening to my black ink. do you know if you can bypass the message of low ink or it just wont print and give error message? i'm new to using WF-7720
I have not seen an effective way to bypass the error message. Have you tried to go to the settings, Maintenance, Ink Cartridge(s) Replacement, and hit START. Do this before doing what I did in the video. It may help.
I subscribed to you. I hope to see some content from you later. 👍🏾
Thank you I did try and 2nd time around worked. Much appreciated.
@@MarianGarciaKakesandKraftsLLC You're very welcome.
I just did an update on software and now all my cartridges that i have been using are not recognized. So this theory doesnt work all the time. I believe its in the update.
It happened to me too.updated
No
It is very difficult to understand you, you speak too low
20 times tried taking them out and back in. Nothing works. You are not by far an expert. Stop trying
Did you ever get the error fixed because I am on number 22 and mine is still not working.
@@cashout_khy4080 Just kept lifting the lid and closing the lid. sometimes taking the cartridges out from time to time. And it finally read them as Non Epson cartridges. Mine is being used as a Sublimation Printer.
It worked fine for me!
You came to RUclips looking for an expert? 😂😂. You're funny.
Firmware updates are blocking these now unfortunately