Solving Loose Steering on Husqvarna Riding Lawn Mower YTH21K46

This video shows how to solve loose steering on a Husqvarna Riding Lawn Mower YTH21K46. The steering shaft is supported by a plastic bushing which becomes worn. This steering bushing, Husqvarna part 532195227, is available on Amazon and easily replaced.

[@mgronda410]

Thank you so much for making clear concise step by step instructions. Very easy to do after watching this.

[@marty01957]

Thanks, Herb!!!

[@cartermorey8647]

thanks for your help herb. greatly appreciated!

[@timothyhorne557]

I appreciate your video sir I knew that the steering wheel bushing needed replacing on one husqvarna I have but didn’t know the location time saved thanks again god bless

[@jeffkelly636]

Helpful. I used a pipe from an old shelter garage to help knock the new bwaring down in. I used wood too. The pipe goes around the whole rod.

[@biffelliotforpresident]

Hey thanks! Great video. Love the Vette too!

[@wormley69]

Thank you very good video. 👍😊

[@mr.nickels7535]

Great video. Straight to the point, clear and included the part number. How much for that vet? Lol

[@thelistener4101]

might use either a "metal" or "pvc" pipe with inside diameter sized for steering rod to make securing the "new" part easier. several other RUclipsrs are using multiple tools to do this and looks to be very difficult & somewhat frustrating as well. just a small FYI to help.

[@Serpico1152]

After removing the old bushing a little WD-40 on a piece of steel wool cleans the area where the shaft contact the new bushing inside nicely, and grease or oil up that shaft area before installing the new bushing, every once in a while I'll lube it with a shot of WD-40 or oil from under the hood just above the bushing area and let it run down between inside the bushing center and shaft to ensure a longer life span.

[@erickherrera4491]

Thanks for sharing

[@judyjohnson630]

Thanks for the video! If I bring my tractor to Maine can you fix it? 🙂

[@user-nc7po8kh9w]

What causes the gear to drop down out of the steering sector

[@pitbull113]

How much for the corvette?

[@chrisforker7487]

Those black replacements are complete garbage! Only buy replacements from Husqvarna. The black cheap 3d printed pieces have waaay more play than the worn OEM.

[@philliphall5198]

I Very much agree, they are just cheap plastic and don’t even fit the shaft correctly
OEM parts only 😊

[@justjeff131]

Was this to correct a loose drive shaft or loose steering wheel? My problem is the steering wheel so loose it nearly makes a full turn before the wheels turn

[@herbcrosby]

The plastic bearing was badly worn so the steering shaft did not stay centered. This made steering very unresponsive. Replacing the bearing made steering more responsive.

[@TheForslund2k]

Did it fix yours?

[@paulthompson3877]

that little notch you called it , its called a keyway ok .

[@angeldew77]

Well OKAY Mr Smarty Pants

[@paulthompson3877]

@@angeldew77 Hi mate , not trying to be a smarty pants ,have a nice day

[@jeffm7669]

Uh this uh video is a great uh drinking game 😂