Thanks. I had similar problem. And today I successfully completed replacing regulator and motor of driver side window glass for my 2002 Odyssey. It would not have been possible without your step by step instructions. Also, I have my passenger side sliding door cable snapped. I looked into some videos but seems its very complicated. I live in Virginia. As a gratitude, I would like to bring my Van to your workshop and get it fixed by the MASTER, if you live somewhere in 100 miles range. ** THANKS **
Hello! Thank you so much for your video, on how to remove the window regulator, cannot fixed it yet..but it sure helped me to get the window all the way stuck to the bottom, pushed it up raised to the middle, get the first one, & from the hole on the speaker was easier to get the other screw/bolt with lots of patience and 10 mm wrench . At least the window is up, for the a/c, secured with 2 boards 29 "( give or take), supporting the window inside plus holding it with tape outside...Really thank you for your clear instructions. Perfect video . a Mom.
Heeeee! Is afternoon here and today is another lesson again, K D thank you for giving us knowledge , to me I used to take the glass out of the door all ways,now I no black tape can't help. Habib Auto all day way from Ghana Accra West Africa
You are brilliant, many thanks for your videos. I would love to work along your side and gain some experience. The only way you could make this videos better is to smile sometimes, I am sure you have greate smile. God bless you brother!
Hey K, i had the very same problem with my 2004 Odyssey, where the window fell to the bottom of the driver door well. I had to remove the first 2 bolts that you had a problem with. They were impossible to reach. I had to purchase a 10mm rachet wrench, but still couldn't insert my hand into the cavity to reach the bolts. So please tell me which tools did you use to remove the two out of reach bolts. Thank you.
Brother I need your advice and brilliant ideas PLEASE my bro. I'm Michael in England by the way brother and own a 2000 Honda Civic EJ9 Hatchback but right hand drive for the Japanese Market. So unknowingly I've only gone and ordered a Dorman 741-736 window regulator which is for a USDM Honda Civic's (Passenger side) so have just discovered that the regulators motor electrical plug is a 2 pin whereas on my UKDM Civic (Driver side) it's a 4 pin plug. So basically regulator and motor would fit as it's for the right side door, just theres 2 wires and a 2 pin plug instead of 4 wires and a 4 pin plug to connect to my UKDM wiring as my civic is right hand drive and regulators are reversal compared to left hand drives. Any ideas to work round this bro? Damn totally my fault I should've known plugs would be different being that RHD - UKDM and LHD- USDM, Totally my fault 🤦🏼🤣 Your advice and ideas would be greatly appreciated please brother, Kind regards Michael in England
@@KITS_Auto_and_Truck_Repair yea i think it might be easier with it up though it was tough to get the screws out but the window was already up so i just had to tape it
Hello sir, Thank you for a very detailed, step by step tutorial. Great job. Blessings to you.
@hopecook2919 My Pleasure!
Thank you very much for this video. This helped me yesterday to fix my window in half a day's work. It's a very well explained video. Thanks again!!!
Bryce Orgill My Pleasure!!
Thanks.
I had similar problem. And today I successfully completed replacing regulator and motor of driver side window glass for my 2002 Odyssey.
It would not have been possible without your step by step instructions.
Also, I have my passenger side sliding door cable snapped. I looked into some videos but seems its very complicated.
I live in Virginia. As a gratitude, I would like to bring my Van to your workshop and get it fixed by the MASTER, if you live somewhere in 100 miles range.
** THANKS **
Uttam Dutta My Pleasure!! I'm located in Dickerson MD, you can email me at Deo@calleva.org for shop!
Hello! Thank you so much for your video, on how to remove the window regulator, cannot fixed it yet..but it sure helped me to get the window all the way stuck to the bottom, pushed it up raised to the middle, get the first one, & from the hole on the speaker was easier to get the other screw/bolt with lots of patience and 10 mm wrench . At least the window is up, for the a/c, secured with 2 boards 29 "( give or take), supporting the window inside plus holding it with tape outside...Really thank you for your clear instructions. Perfect video .
a Mom.
Glory B My Pleasure!! I'm so glad to hear that the video was helpful!
Heeeee! Is afternoon here and today is another lesson again, K D thank you for giving us knowledge , to me I used to take the glass out of the door all ways,now I no black tape can't help. Habib Auto all day way from Ghana Accra West Africa
Suleman Habib Thank you!! I appreciate you bro!!
Thanks for the video keep doing really appreciate your video
Jayward Julian My Pleasure!!
Thank you, very helpful!
@debrawest4859 My Pleasure!
You are brilliant, many thanks for your videos. I would love to work along your side and gain some experience.
The only way you could make this videos better is to smile sometimes, I am sure you have greate smile. God bless you brother!
Samsunga10 Samsung Thank you!! hahah I'll remember to smile next time!!
Hey K, i had the very same problem with my 2004 Odyssey, where the window fell to the bottom of the driver door well. I had to remove the first 2 bolts that you had a problem with. They were impossible to reach. I had to purchase a 10mm rachet wrench, but still couldn't insert my hand into the cavity to reach the bolts. So please tell me which tools did you use to remove the two out of reach bolts.
Thank you.
Tells The Truth I used a 10 mm short wrench!!
@@KITS_Auto_and_Truck_Repair Thank you KD.
@@tellsthetruth894 My Pleasure!!
Brother I need your advice and brilliant ideas PLEASE my bro.
I'm Michael in England by the way brother and own a 2000 Honda Civic EJ9 Hatchback but right hand drive for the Japanese Market.
So unknowingly I've only gone and ordered a Dorman 741-736 window regulator which is for a USDM Honda Civic's (Passenger side) so have just discovered that the regulators motor electrical plug is a 2 pin whereas on my UKDM Civic (Driver side) it's a 4 pin plug.
So basically regulator and motor would fit as it's for the right side door, just theres 2 wires and a 2 pin plug instead of 4 wires and a 4 pin plug to connect to my UKDM wiring as my civic is right hand drive and regulators are reversal compared to left hand drives.
Any ideas to work round this bro? Damn totally my fault I should've known plugs would be different being that RHD - UKDM and LHD- USDM,
Totally my fault 🤦🏼🤣
Your advice and ideas would be greatly appreciated please brother,
Kind regards
Michael in England
@michaelpaterson8086 I don't like to do adaptations, I would recommend getting the right part! it's gonna save you time and money!
@@KITS_Auto_and_Truck_Repair I think you're 💯 right bro, advice taken and will buy the correct regulator, thanks Man 😁😁
@@michaelpaterson8086 My Pleasure!
Good job
Zafar Ahmad Thank you!!
Excellent
@Ekrim-eb1jb Thank you!
@@KITS_Auto_and_Truck_Repair As a matter of fact, I followed your video and fixed my today.
Great video I like your shirt where did u get it? I like to get one?
Anthony Dimanno Thank you!! I got this shirt from my Snapon dealer!!
Hi, there was no reason to remove the speaker grill or the three screws on the speaker.
Marc Bridie Those screws screw onto the Door thus you gotta remove them
@@KITS_Auto_and_Truck_Repair Nope. Did this myself Saturday.
@@MarcBridie sounds good, I'm glad to hear that you did it yourself!!
At least your window is stuck all the way at the bottom and not the top i am having a hard time lol
Tony Rekkusu Lol!! it's kind of the same!!
@@KITS_Auto_and_Truck_Repair yea i think it might be easier with it up though it was tough to get the screws out but the window was already up so i just had to tape it
@@TonyRekkusu cool!!
@@KITS_Auto_and_Truck_Repair yea but thank you your video was really helpful
No reason to totally remove the water shielding.
Marc Bridie Removing the water shielding made a bit easier but I agree you don't have to remove it completely