Thanks for this. The middle tube on the top of the canister that swivels is a pain to get off. It does not twist and pop off, on my 2009 I could see a white connector that let it swivel, you need to get a small screw driver and lift the white connector legs very slightly to get them over the rib on the canister connector. Then it slides off easy. I disconnected everything first for access.
@@RescueMoversDFW how so ? I have qx60 . I was driving it and FCw , IBA , traction and engine lights came on and couldn't accelerate and car speed went to 0 km and stayed on idle without any issue
Thanks for the video, i have the same problem. I changed the valve already ,but the light came back on. i never thought to blow the dust out of it. Going to try that next
Cleared po442 and 456 still have po448 . Replaced charcoal canister and evap purge solenoid. Code still there. Have a 2006 subaru sti. Gracias por la ayuda soy pedro
@@RescueMoversDFW el p0442 es d small leak y el p0448 es el misno k tiene usted yo ise lo mismo k usted pro cierra bieh el solenoide y no esta sucio el canister x eso pense k ala mejor no cierra completamente. Y x eso el p0442
Update from yesterday , Changed the value and no more dash light!!! thanks again.
Nice video Bro well done, In the morning I will tackle my Frontier... All the best from Canada,,.
Thanks for this. The middle tube on the top of the canister that swivels is a pain to get off. It does not twist and pop off, on my 2009 I could see a white connector that let it swivel, you need to get a small screw driver and lift the white connector legs very slightly to get them over the rib on the canister connector. Then it slides off easy. I disconnected everything first for access.
Thank you very much for the information. I might suggest using slightly less grease. maybe put some on a Q-tip (cotton swab) and put it on that way.
No no shut up
I have p0455 frontier 07. Any help n ideas ..thnx gracias !!
Can this code , cause your car to stop and cannot accelerate anymore ?
Yes that's correct
@@RescueMoversDFW how so ? I have qx60 . I was driving it and FCw , IBA , traction and engine lights came on and couldn't accelerate and car speed went to 0 km and stayed on idle without any issue
Thanks for the video, i have the same problem. I changed the valve already ,but the light came back on. i never thought to blow the dust out of it. Going to try that next
Try it and let me know, I'm pretty sure it will be the dust
Do you fix these for other people ?
No sir , I just do it to my own cars
Cleared po442 and 456 still have po448 . Replaced charcoal canister and evap purge solenoid. Code still there. Have a 2006 subaru sti. Gracias por la ayuda soy pedro
Si borraste Los codigos despues de haber remplazado Las partes
My bro over here lil 2 sleepy
Well done 👍
Mine a nissan murano is jt the same
Same all same bro
Good job
Compre un smoke machine marca autool sdt-206
Si le sacaste o limpiaste el canister como en el video?
Ya ni bosteces que medio hueva y deje el trabajo para la semana que viene
Te estas durmiendo
Oye tengo un 442 y un 448 tu kres k pueda ser k no cierre completamente?
la neta no se , no me han tocado esos codigos
@@RescueMoversDFW el p0442 es d small leak y el p0448 es el misno k tiene usted yo ise lo mismo k usted pro cierra bieh el solenoide y no esta sucio el canister x eso pense k ala mejor no cierra completamente. Y x eso el p0442