Bill, first off I want to thank you from my heart for the time and effort you put in to make this Scale Helicopter build possible. There is not many small build videos on the internet so you have done a GREAT service for the Hobby and certainly me and others. There are NO OMP Scale conversions out there so you are the first, a true trail blazer. I love my OMP M2 but not really into 3D flying. This is going to be my first Scale build and your video will prove a great example to follow. I only have 2 questions? Does it matter where you drill and mount the screws that hold the mechanics into place on the wood mount? Also if possible can you give us a link to the foam antivibration tail tube doughnut that you used? Again, thank you so very much for your time and effort.
Good upload! =) My dream is a 250 - Fun-Scale MD500D (or with NOTAR Technology) with a 5-bladed Rotorhead & a auto-stabilization system but sadly under my circumstances it’s not possible to realize it "now". With kindest regards from a 🚁-Fan to all other’s =] ✌🏼
how hard would it be to make the main rotor turn counter clockwise? I guess that part is not so difficult, but make the gyro to properly control the tail rotor would be the hard part.
Excellent Billy! When you changed the M2 tail motor from the RH side to the LH side did you have modify the rotation of the tail motor or blade? Thanks!
Cool upgrading, personally I liked the scales heli's, that's yours passion & patience...congratulations. 🙂 🤗
Bill, first off I want to thank you from my heart for the time and effort you put in to make this Scale Helicopter build possible. There is not many small build videos on the internet so you have done a GREAT service for the Hobby and certainly me and others. There are NO OMP Scale conversions out there so you are the first, a true trail blazer. I love my OMP M2 but not really into 3D flying. This is going to be my first Scale build and your video will prove a great example to follow. I only have 2 questions? Does it matter where you drill and mount the screws that hold the mechanics into place on the wood mount? Also if possible can you give us a link to the foam antivibration tail tube doughnut that you used? Again, thank you so very much for your time and effort.
Good upload! =)
My dream is a 250 - Fun-Scale MD500D (or with NOTAR Technology) with a 5-bladed Rotorhead & a auto-stabilization system but sadly under my circumstances it’s not possible to realize it "now".
With kindest regards from a 🚁-Fan to all other’s =] ✌🏼
this is rad. would love to see video of this thing in flight
Go to the OMP Group page on Facebook, videos there.
ruclips.net/video/PZO9xkDf02c/видео.html
❤
how hard would it be to make the main rotor turn counter clockwise?
I guess that part is not so difficult, but make the gyro to properly control the tail rotor would be the hard part.
Great sir!
Hello and thanks for the video. Could you please attach a link to the flight video? i can't find that
hi will load some flight Videos of her , she has more than enough power to handle it
hi will load some soon , thx bud
Nice work! I shall subscribe at once!
thx buddy , the Fuz is a Trex250 that i made to fit , it flew well and is happy with it , thx
Excellent Billy! When you changed the M2 tail motor from the RH side to the LH side did you have modify the rotation of the tail motor or blade? Thanks!
no , all was placed back as is , just the mounting goes to the other side to give you prop clearance on the body ..
hi sorry no left all as is , ..
@@badassbilly6633 are you sure about that? I'm pretty sure I had to swap 2 wires of 3 tail motor wires to make it turn the other way around.
Hey bad ass Billy, what thickness aluminum plate did you use, I have the same scale body, want to do the same
Love from Pakistan ❤
@wildlensAbrar
Hi where did you get that fuselage from? I been looking for that exact fuselage everywhere I've always wanted it
bought it second hand bud ..
no flight vids?
Go to the OMP Group page on Facebook, videos there.
ruclips.net/video/PZO9xkDf02c/видео.html
ruclips.net/video/PZO9xkDf02c/видео.html
ruclips.net/video/PZO9xkDf02c/видео.html
Hi can you fly this helicopter in 3D mode with the fuselage on?
nice setup! btw will you replace the rotor head to 4 blade?
5 blades for MD500
but I don't think there are any 250 sized 5 blade rotor head.
@@davidjacobs8558 yes there is, frm china cnc 250 size 5 & 6 blade rotor head has released on end of 2022, take a search
@@davidjacobs8558 ive mod to 6 blade, m2 evo
Lekker