Mercedes W212 | Keyless-Go Repair
HTML-код
- Опубликовано: 14 фев 2024
- It's likely a common issue caused by the deterioration of the seal layer around the door handle, leading to moisture ingress and cable breakage.
I had following fault code
(9A4A14 the keyless-go sensor in the left front door handle has a malfunction. There is a short circuit to ground or an open circuit.)
Thanks to @luked272 for the fast help regarding how the keyless-go system works! - Авто/Мото
Excellent work as always. I typed this one handed too!
And all one handed. Incredible.!
Nice Video MB212 🙏🏻 Thank you for the part numbers and also which tools to use, that’s what makes your videos better and stand out from the rest!
The same procedure goes for all door handles, but be prepared for the rear doors the normal torx not going to work you need a long guy there!
thats a shame, because I wanted to remove the rear right door handle and get it sprayed again because it has a small defect on the colour.
Shouldn’t be much worries go to your local hardware store and you should find a long TORX like this for a few bucks!
www.proffsmagasinet.se/maskintillbehor-forbrukning/borra-och-mejsla/bits/bits-losa/bosch-t20-skruvbits-1-pack-152mm-jn57090-4?channable=00a9e8736b75004a4e35373039302d3468&VAT=1&gad_source=1&gclid=EAIaIQobChMI7I3f0P6vhAMVc1aRBR2iiwg6EAQYAiABEgKFO_D_BwE
@@MB212 i think I will buy a set, for these kinds of repairs. 👍🏻
Same here I did not have such long ones at home, I going to measure next time at garage what’s minimum length should be!
Man! I love attention to details and video editing, and all that with one hand, filming with another one😂❤️ You're cool!
I did the same repair on my 2016 CLS and called it done for free! 😂 what can be better
Thanks! Is a struggle sometimes for sure the one hand army thing but I guess it looks more easy at the video hehe : )
Yess not often can make a Mercedes repair for free like this, I had some bad soldering so I could not get the grommet all way in but should not be to much issue!
@MB212 keep it coming bro, your videos are amazing. Short and straight to the point without losing informative part of repair. 😍
Nice repair and good editing 🙌🏼
And here is another satisfying tutorial, I really enjoed this 4min. Thanks a lot Nordbo!
well done ! love that thing with the part numbers ! is really helpful !!
Thanks! Like I've seen before, your videos are very good, and with the information and technical helpful.👌👍
I‘m really fascinated of how you know all these things! Wow great job Chef
Thanks! Learned much by doing, but also have lots of good mb experts I speak regularly with from Poland and Germany!
Very helpful! Thanks for sharing!
These videos are so high quality god damn. Impresses every time
His editing/timing is hilarious which I’m sure is intentional 😂 thanks MB!
Another excellent video. I always wondered why the sensor pad worked average on my W212, now I know! Well done, keep the video's coming.
Thanks 🫡 now when I seen how bad these door seals was and probably due to that cables corroding more. I going to add that to my service thing. I checked them at mb and cost is only about 1.5 euro each.
@@MB212 awesome. Well done. Good idea.
Nice fix!
Nice video.
Super Video 👍
Cool you were able to find that broken wire. Good stuff
Hey Zaki nice to see you here as well ❤️
@@ynte8114
Yess can’t be without (KG) when finally have it at the car : )
Danke!!!
Nice video no shitty talks just let see everyone how it’s done
You don’t need to push outside button to open the car, only to close
Hey, is that W222 S-Class wheels in the background?
They are 5-DOUBLE SPOKE
A 212 401 03 00
Often seen at facelift AMG pack!
@@MB212 actually good lookin’ wheels.
will you put them on this w212?
My keyless-Go system died at ten years, no doors or either key respond. I have read that the receiver, keys and ignition switch are usually all replaced at the stealer for $1,000. Mine will probably never be fixed 😢
automotive professor )))
"promo sm"