I drilled a few tiny holes in bottom of basin and put pump on top of 2 bricks so no sediment would get into pump. I also installed a GFI outlet for pump for safety reasons. Good video for a do it yourselfer very informative.
Thank you for the detailed video. What if the basement was 80% completed/furnished with no drainage pipes in place, would you need to dig path around foundation wall to install pipes in order for the sump pump to be effective?
That's if the basement floods the inlet is where those wires are coming out from. Water will flow into the bucket because the bucket should be below the floor level or pitched in that area enough for water to flow into it. Then it gets pumped out.
@@eliash9154 You need to put holes in the bucket. That way long before the basement floods it will be pumping out the water. Your basement shouldn't ever get water in it...
What purpose is this for? you have no ground water and the lid will prevent any burst pipe water from entering the pit easily, and you have no weeping tiles leading into the pit. Just seems unnecessary. Good install though.
The lid to a sump pump is not water tight. Also Under heavy rain the sump pump will fill. And with no floor drains it will put tremendous pressure on the foundation
How does the water gets into the bucket cause usually i see a big pipe on the side of the bucket that is under the floor level and wih your installation i dont see it.
@@gordd7348He said he was worried if a pipe broke there was no where for the water to go since there are no floor drains. A lot of work for an unlikely scenario.
AAAAAAHHHHHHH...REALLY! Just wondering HOW........ANY water is supposed to get into the crock. A crock with no side holes or ANY DRAIN TILE put into the crock basin. I like your ambition. You can still cut a slot wider than your drain tile. Cover that with STONE just below your slab and fill the rest with concrete...............From a guy with 37 years in the construction trade.
in the beginning of the video i stated i was installing the sum pump because the basement does not have any floor drains.so the pump is only for emergency like in case a pipe bust the basement doesnt turn into a swimming pool. hope that answer your question
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Nice video and impressed with your work ethic and balancing your tasks and being a parent. Great job!
Best video to date on a sump pump instillation, this is exactly what i needed to do my own! Thank you so much!
You’re welcome!!
I drilled a few tiny holes in bottom of basin and put pump on top of 2 bricks so no sediment would get into pump. I also installed a GFI outlet for pump for safety reasons. Good video for a do it yourselfer very informative.
I really enjoyed this video. Quality work on a project to protect and improve your house. I'll be back to look at your other videos.
Thank you!
Superb. You took great care and did quality work. Impressive work ethics and attention to detail, not to mention being a great parent.
Good job man!!
Good lookin out breadren this gives me confidence to do the job myself
Clean Work... Excellent....
love the video, thanks man for making it!
Great job, Great video as usual. thumps up👍
Thank you!
how do you see the water getting into the basin exactly?
Thank you
Thank you for the detailed video. What if the basement was 80% completed/furnished with no drainage pipes in place, would you need to dig path around foundation wall to install pipes in order for the sump pump to be effective?
Ya, it’s not a bad idea it definitely wouldn’t hurt.
@@officialnuera1 thank you!
There's no inlet pipe or holes in the bucket. Where's the water coming from in order to suck it out?
That's if the basement floods the inlet is where those wires are coming out from. Water will flow into the bucket because the bucket should be below the floor level or pitched in that area enough for water to flow into it. Then it gets pumped out.
@@eliash9154 You need to put holes in the bucket. That way long before the basement floods it will be pumping out the water. Your basement shouldn't ever get water in it...
No way for water to enter sump pit?
To anyone installing, you will want some drainage gravel under the sump bucket too
12:00 whatever kinda bit is that? super cool.
What purpose is this for? you have no ground water and the lid will prevent any burst pipe water from entering the pit easily, and you have no weeping tiles leading into the pit. Just seems unnecessary. Good install though.
The lid to a sump pump is not water tight. Also Under heavy rain the sump pump will fill. And with no floor drains it will put tremendous pressure on the foundation
That’s what I was going to say I just finish one and the home owner needed one because she had shit load of ground water!!!
Just because there's no ground water now, doesn't mean there won't be when it rains
Some homes just don't drain excess water from around the foundation like newer homes do... Mine only runs in the spring time.
Drainage gravel around sump basin with stones larger than the holes you drill in sump bucket
How does the water gets into the bucket cause usually i see a big pipe on the side of the bucket that is under the floor level and wih your installation i dont see it.
I agree. I don't see the reason for the sump pump since it is not being used to drain ground water from the foundation.
@@gordd7348He said he was worried if a pipe broke there was no where for the water to go since there are no floor drains. A lot of work for an unlikely scenario.
AAAAAAHHHHHHH...REALLY! Just wondering HOW........ANY water is supposed to get into the crock. A crock with no side holes or ANY DRAIN TILE put into the crock basin. I like your ambition. You can still cut a slot wider than your drain tile. Cover that with STONE just below your slab and fill the rest with concrete...............From a guy with 37 years in the construction trade.
in the beginning of the video i stated i was installing the sum pump because the basement does not have any floor drains.so the pump is only for emergency like in case a pipe bust the basement doesnt turn into a swimming pool. hope that answer your question
Do you need to drill holes on the basin?
I wasn't sure if I missed that part or not, but not having holes how is the ground water going to fill the basin!
1:39 The 3" white cast iron elbow looks in rough shape. Replace that before it fails.
No foreign pipes no holes in the basket I don't understand
You didn’t drill any holes in it or fill around the pit with crushed stone. It’s useless
This was a waste of time and money
why is that?
No drain holes and a geotextile wrap of the bucket@ericwotton2046
why are u talking like u guyana bud :)
Thank you
No problem!