Ep6. Hiding ALL the wiring in the Mk1 Caddy 20v Turbo Engine Bay!
HTML-код
- Опубликовано: 1 фев 2024
- This week it was time to make a start on my favourite part of these projects and that is the wiring! it takes a lot of planning to hide everything and as always its all in the preparation!
Catch up on the full build here:
• VW Caddy 20v turbo SHO...
Donate to Super Ron here:
www.buymeacoffee.com/Super.Ron
the brackets and clutch conversion are from here:
www.retrofication.co.uk/
Follow Autoshack here:
/ autoshackipswich
Have Fun, Super Ron! 
Авто/Мото
Playing catch up m8.
Fair play to you and I genuinely take my hat off to you for having the patience to do all that as well as the enthusiasm 👍 Top job 👌
Thanks mate, really enjoying myself with this one 😁
Fair play you have made an absolutely lovely job of that, top workmanship something to be proud of.
Thanks 😁 can't wait to get onto the fancy wiring 😎
Love this series! Keep up the great work.🤘I'm currently restoring an 81 VW pickup, so this is great stuff to learn and think about.
Thanks for watching 😁
Great series Ron, I wish Vauxhalls were as well support with these well made after market partd
You can buy pretty much anything for conversions in the vw world, every engine, every platform, it's so well catered for. The Vauxhall world stopped at xe nova mounts in the 90s 😒
Great work Ron , look foreward to the next one. Well done!
Thanks for watching 😁
Awsome work mate. My setup is very similar for my R32 build.
My second fuse box is right where yours is. My ECU sits above the main fuse board and is held in place with a plastic ECU mounting bracket from a 6R polo.
Loving this series Ron 👌
Yes wiring in a r32 is pretty much the same as wiring in a 20vt, I didnt know about a polo ecu holder, might have to look that up. Thanks for watching 😁
Quality work 👍🏻
Thanks for watching 😁
Loving these episodes good job ron
Thanks for watching 😁
🙌🙌 Ron 🙌🙌
Another generously concise video mate, thank you so much for this one, I'll be watching it several times again trust me 😂
Catch you next week 😉👍
Thanks for watching 😁 it was getting a bit long but I knew it would be well received! 😀
@@SuperRon mate, I just want to thank you for taking the time to upload your videos, I'm late to the 20vt swap game, I was always a MK1/MK2 Golf with Kr16v/9a16v swap kinda guy, but by the time the MK4 platform came out I'd jumped to E30's with 325i/328i conversions, NA is so much simpler and RWD obviously 😂
But I've come back home since lockdown, I'm now 80% through a MK2 Scirocco 20vt full rebuild, the engine loom is completed and it runs, but the dash loom hasn't been touched yet so I appreciate anything I can learn from you!
So I don't think I'm alone in saying we'd watch 45min+ videos if that's what it takes to get across what's needed
Really appreciate that 😁
Never disappoints us top work again and explained well and thought out in the proper way fair mate 👍👍👍👍
Thanks 😁
@@SuperRon just a note where can I get wiring diagrams
I got a program called elsawin on ebay for about a tenner and gives you every VAG wiring diagram ever. Looks like they dont do any on ebay anymore but give it a google and theres some on there. It's so handy
Thank you 👍👍
Great video and very nicely explained on which wires are required / what each one is doing.
You work is very inspiring... keep the great work going.
I'm sure this series is going to be a great hit for people doing this type of conversion. 👏
I've done so many now I'm starting to recognise the wiring colours off by heart 🤣 thanks for watching 😁
Class 😎 can’t wait for the next one. In the process of doing the wiring on my Mk1 cabby so this will be useful 👍🏻
Awesome! Thanks for watching 😁
Can I ask, where did you get the fuse box and the box of connectors from. Cheers
They are all made by Durite, we have a Durite dealer we get them from but they are sold online at various places and on ebay too 👍
Thanks for the reply. Ok, I will have a look 👍🏻 when’s the next episode? 😎
@@MrRdeoliveira every friday at 6pm 😁
lovely too see amazing quality keep on going with tutorials for us
It was a bit of a long video with all the talking but I couldn't find anything I wanted to leave out! Thanks for watching 😁
@@SuperRon more detailed than better I am going to use your swirl pot location in previous video in white MK2 in my swap very inspiring poles keep them coming long
Same swirl pot going on this in the next episode 😎
@SuperRon , I know from my friends that upload to RUclips about how much time goes into editing and replying to comments so thanks for taking the time to put your skills online, especially for the likes of me, I'm from before turbo charging (unless you count that one Uno turbo disinterested into a roundabout in 1991 😬) but by the times the 20vt was launched into the VAG fleet I'd moved to the dark side (BMW) because, apart from the VR6 and the 20vt the "MK4" platform was basically boring and it handled nothing like it's predecessor (power to weight) without expensive upgrades... But, during lockdown I saw the error of my ways and started a MK1 platform 20vt conversion, and some 3.5yrs later it's JUST going back together 😂
So for people like me who are playing catch up in their own workshops your videos are invaluable, so like @@filiprolek7509says, we are happy to watch 45min plus videos if that's what it takes to show what's needed
Thanks again, catch you next week 😉👍
Quality video, I'm enjoying this series and following the conversion along. It's great to know how the engine conversions work and what's involved. Keep the content coming 💪👌
Thanks for watching 😁 even though it's such a common conversion people don't realise what's actually involved in getting them in right!
Brillaint job
Thanks for watching 😁
Awesome job! Makes me want to redo my mk2 scirocco 1.8t wiring... mine looks like a snakes wedding! 😢
I've re-done so many peoples conversions, I love it 😀 thanks for watching 😁
Excellent work once again sir. Keep them coming.🎉
Thanks for watching 😁
Bravo! Bravo! 🙂
Thanks for watching 😁
Great work on that wiring there maye do t get how you dont habe loads more subscribers
I wish I could figure out how to magic some more 🤔 it's getting there slowly 😁
Just done the reverse switch on my caddy. Was on the yellow plug c. Pins 20 and 21. Pin 20 is the positive to the switch.
Yes I have found it there now, strange they're different to the hatchbacks! It's the one i called a possible diesel heater with the double plug. Thanks for watching 😁
You are doing amazing job @24.34 the mystery wire maybe it is for the key code receiver just a guess
Thanks for watching 😁 we've got a TT coming in next week so I might have a look and follow the wire!
Bonnet gas struts maybe? Get rid of the bonnet prop stick
Maybe, they do tend to flex mk1 hinges a bit though. Thanks for watching 😁
Great ideas and setup. Link for the throttle and hydraulic conversion kits please.
Thanks for watching 😁 they're from here: www.retrofication.co.uk/
Great video. My wife worked for durite for many years, and only round the corner from me, she still has friends there. I'll see what if they can do you any promo bits or discounts 😊
That could be super handy, I always use their stuff, I didn't realise they were actually local! I did email them for the sticker wall but never heard anything back 👍
@SuperRon yes, only In Harwich . Leave it with me
do not put your ecu under the heater core or anywhere near the trans tunnel, i had multiple problems with my ecu getting too hot in those areas and causing all sorts of electrical problems till the ecu itself cooled down.
Interesting! Thanks for watching 😁
Pin 116 is for the Evap valve. So yea don’t need that. 👍🏻
I'm pretty sure evap purge valve is accounted for on the other loom by the lambdas 🤔
@@SuperRon the N115 valve? Maybe. Look up obsoleteuk they do the Yellow plug that has melted and all the pins if you need a fresh one. 👍🏻
@joelb2660 I dont think so, its something on the TT car loom as it exits through the 14a plug, we've got a BAM TT in next week, I might have to follow the wires 🤣
Great build so far. Have a caddy as well and could only dream of sending it to you for a build. How much does a build like this cost ?
Thanks for watching 😁 with the respray aswel he'll probably have spent £20-30k!
What fixings did weld in to the inner arches for the loom? That's my next job and it'll be my first attempt at welding 😬
They are just normal bolts, thanks for watching 😁
I've bought one of the DBW brackets for my build and am going to weld it in like you have done.
Did you fit rivnuts to the bracket to make fitting the pedal afterwards easier or did you just struggle with the nuts and bolts? Seems like it'll be a c**t to fit one the bracket is welded in.
I did think about riv nuts but I ended up just struggling with nuts and bolts as I was already laying in the footwell. Hopefully it's the kind of thing you'd only have to fit once.
i am gonna swap 1.8t in a old bug beetle 1300 do i need a fuse box ? or can i stick with just the beetle fuse box , i am not gonna change the body harness keep the original beetle just want to know if i can start the 1.8t i have the engine harness the ecu and will delete the imobilizer
The 1.8t loom does need 'converting' to run it's own standalone mini fusebox. You can keep your beetle fusebox to run the rest of the car, then the new 1.8t fuse box just needs an ignition live, battery live and earth.
@@SuperRon thank you for the answer , i have the audi tt fuse box can i use it or i just buy another fuse box for the engine ? can i contact somewhere elae where i can send you pictures of what i am actually doing to avoid mistakes 🙏
Where are you based? There are a couple of companies in the UK that will convert your loom if you send it to them, then it will just be plug and play
@@SuperRon infortunately i am in north africa i am really far away " ALGERIA "
@sadness3out961 I recommend these, they might send looms out overseas, worth asking. vagtronics.co.uk/wiring-looms/