I finally got the Zeta Ver Ka and after watching your videos I can't wait to build it. I just have s question, what was the clay like thing you pulled at 10:02? And what it is for
@@Kaio_Keint I usually just cut out the decal, soak in water for 15 secs, apply Mr mark setter, slide it to parts, dry it, apply Mr mark softer, dry it again and 👍
I tried spray painting the interior and so many pieces ended up breaking unfortunately. Same happened to my Sinanju so I combined the 2 kits to make a monstrosity! 😂
I recommend not coating the frame unless you're using an airbrush and can mist coat, because coating makes the parts tighter. At least you got a cool kitbash 😁
Hi, I also have this kit and plan on building it this month. Is it necessary to use a sanding stick for nub removal on this one or is a single bladed nipper enough?
I bought this model and it is an awesome looking kit. The only issue I have with it, I still have to take it apart to transform it between modes.
YEAA the transformation is annoyingly difficult, even in the video some of the parts aren't even connected, I just leave it hanging there
Agree... It's not as bad as the RG, but it's still hard to transform. Looks great though, Mr Katoki and Co did an awesome job here
The transform scene was great :)
You did a great job as always man! no sprew bucket so imma have to give it a 9/10
😅😅
It looks great even without spraying paint!
Yea the parts are very well color separated
Nice job! It's a thing of beauty
Whoaaa, such a cool model kit.
I finally got the Zeta Ver Ka and after watching your videos I can't wait to build it.
I just have s question, what was the clay like thing you pulled at 10:02? And what it is for
It's thumbtacks, so the part won't move when I apply the decals
@@knitehobby do you have a guide for water decal application
@@Kaio_Keint I usually just cut out the decal, soak in water for 15 secs, apply Mr mark setter, slide it to parts, dry it, apply Mr mark softer, dry it again and 👍
Omg it transformes like a transformers toy that epic
It's the hardest transformation I've ever done with a gunpla as well
@@knitehobbyand it's seemingly not a massive handgrenade like some masterpiece transformers
Jesus that’s awesome 🪽🔔👑🗡️🛡️
Awesome!🔥😤🔥
I tried spray painting the interior and so many pieces ended up breaking unfortunately. Same happened to my Sinanju so I combined the 2 kits to make a monstrosity! 😂
I recommend not coating the frame unless you're using an airbrush and can mist coat, because coating makes the parts tighter. At least you got a cool kitbash 😁
Impressive! May I know how long do you spend to build this gundam?
I only have time to build on weekends, took me 4 weeks
What's the camera you use? Also do you use a separate mic for a clearer audio?
I actually just use my phone, planning to get a mic soon as well
does this use a lot of undergates?
No, if I remember correctly it's only the white parts that are undergated which is pointless 😅 the rest I cleaned the nubs
only some from G runners
Whats the model of the cleanup nippers?
DNR (DanurDoner), it's an Indonesian brand
@@knitehobby unfortunatly it cost more to ship the nippers than there price ,do u have any other recomendations
Dspiae or manwah's nippers are good and affordable, planning to get one as well
How about the decals where did you get the white clear paint?
It's MR.Hobby's mark setter and mark softer
Hi, I also have this kit and plan on building it this month. Is it necessary to use a sanding stick for nub removal on this one or is a single bladed nipper enough?
A single blade nipper is enough as long as you can get that perfect technique, but I think it will still show on the red, blue and black parts
Do you use a separate tool for removing the pieces from the runner and the excess plastic?
Both nippers, but the second snip I use a single blade nipper for extra precision
Thanks for the tip! Btw, is a single-blade nipper the same as an exacto-blade?
It's a bit more precise than an exacto knife plus you don't have the risk of taking of too much material
I messed up one both the arms that I stop right there and that was about four or five months ago 😤
Build yg bisa transform lagi bg
Siappp
How LONG did this take?!?!?! I just built my first RG in the Wing Gundam and that took me 7 hours...
I only have time to build in weekends but I think around 9 hours? Excluding decals and panel line
You should not cut runner directly. There cutting tutorial in the manual book so you should read it.
😮😮😮😮😊😊😊❤❤❤
Kit ni solid ?
Solid, tapi kitnya berat jadi rasa engga seimbang
@@knitehobby 👍🏻👍🏻👍🏻