Was thinking about you today when I had a moment where “YA GOTTA FOCUS” and then looked up how to make a pull-up bar and found this. Love it. Never stop saying the gotta focus catch phrase it’s the best
@@victorstrokov8181 yes and drilling the hole further up. Putting it like 3/4 of a inch from the bottom it is likely to break through if you stress it. That's okay though he just made it quickly with what is on hand.
I have a 7.5-8ft ceiling in my room and there is one of those little attic access hatches. No ladder, just a square of drywall and trim around it to keep it from falling down. If I push the hatch up i have direct access to the cross members that support the ceiling and holding the walls together. The cross members are at the perfect height for a pullup. Most people probably have one in their closet or bathroom or something.
Hey man the hole is a bit close to the end of the wood. Might be worth putting a little metal strap round the bottom of those uprights so that the end grain doesn't break out.
Would definitely change that curtain rod to a steel pipe that's stronger, and would also have put the holes a little higher that looks like over time it will fail
Hey Lucas, I have brain teaser for you.... How do you perform t bar pull-ups with an at home pull-up bar? With and without the actual t bar. I want to isolate those wing-lats by locking up my arms in a 90 degree angle for the entire pull-up rotation.
Will 5-minute pull-up bar last longer than 5 minutes?
It can, but you gotta focus.
hahahahahaah good one the first hole is horrible
May be!
@@LOVEJOTYT bro what😂
Bro, I cannot even last 5 minutes.
"wife comes in"
what's going on, what's happening!!!
lucas: "nothing baby don't come down" lol
*currently destroying the ceiling*
Don't worry it's not part of the house babe 😂
I'm glad I'm not the only one who rushes into stuff like this. Results vary.
Actually this is the real 5-minutes craft
Instructions weren't clear, my house collapsed.
@lord raghuvansi he's joking, my guy
My wife left..
@@fenrirwolf456 cool
@@yonisilverstone6605 He is also joking...
@@vaishnavborade6684 oh fine my bad
Was thinking about you today when I had a moment where “YA GOTTA FOCUS” and then looked up how to make a pull-up bar and found this. Love it. Never stop saying the gotta focus catch phrase it’s the best
I mean I like it but you shouldn't have vertical stress that close to the end grain.
Stop worrying about the dudes wood and start worrying about getting some bitches
@@KevinGonzalez-en8fd this is amazing
Couple hundred pounds every now and then won’t do anything it’s not consistent enough
@@CazzEdits no its not
i don't think it can handle more then 90kg, is also good to keep your weight in check lol
4 2×4 blocks instead of 2 2×4s could support double the weight
@@victorstrokov8181 yes and drilling the hole further up. Putting it like 3/4 of a inch from the bottom it is likely to break through if you stress it. That's okay though he just made it quickly with what is on hand.
Cool video. Keep the "home workout builds" coming. Also, the ones where you try different fast food. Always enjoyable
I have a 7.5-8ft ceiling in my room and there is one of those little attic access hatches. No ladder, just a square of drywall and trim around it to keep it from falling down. If I push the hatch up i have direct access to the cross members that support the ceiling and holding the walls together. The cross members are at the perfect height for a pullup. Most people probably have one in their closet or bathroom or something.
Great attitude! The hole may be a tad too close to the end of the 2 by 4, lol!
lol i like the change from a Parkour/Flips/health channel into a DIY channel 😂😂
Hahahaha I agree .... But the humour is still alive though😝🤟🏼
Use two bicycle hooks and screw them into the bottom of the joists. Hang the rod on the hooks. Even faster and less work.
Great idea!
Not as strong
Using that method for years. Except the bar rotates. 😎
Pigmie: "When you can't get something to work, you just gotta get it to work"
Me: My God! Why didn't I think of that!?
Just buy a house if you're homeless :)
I needed this 2 days ago 😂
Thanks mate!!
I was looking for many months how to fix, and you gave me the solution!
How was it holding up?
He focused away everything that blocked him from his goal 💥
I like this because no pipe flange is needed. And a tight, snug hole is best for your pipe.
Perfect. Just sent this to my husband🙌🏼
Dude - that's a real hack job. Still - love it! Time for pullups!!
You could have been president 2.11m subs with vids like this, a great snake oils salesman
Quality craftsmanship there.
This was a very cool video. You are great on-camera. Funny and informative!! Good job.
BUT YOU GOTTA FOCUS!
Wholesome
That’s great. When can you come over and install mine?
Lucas officially lost it. Lol love you brotha. Stay safe and sane
Dude I'm glad I just found your channel you're funny af
You are really funny , in a minded way , not just like others funny RUclipsrs but in a bullshit way . You deserve a better viewer numbers :))))
Make sure to level it horizontally to avoid ruining your back.
Hey man the hole is a bit close to the end of the wood. Might be worth putting a little metal strap round the bottom of those uprights so that the end grain doesn't break out.
Keep putting out the vids, they are great! Inspires me to to try and do the same for our sword fighting academy! Thanks again
Impressive "Gunsmoke" reference.
Easy way to make pull up bar...nice video
fANTASTIC!! I will try to do it hahhaha
Nice., simple and cheap..
I will just add a 2x4x6" additional wood blocks to where the bar goes through.
This guy is really funny!
Just finished🔥 please upload a vid on how to make a chin up bar in 5mins
Thanks man... From a scrawny high schooler
Awesome!!! I am looking for a chin up bar and I might just try your style. 👍🏽
McGeyvor would be proud: step one: HAVE A HOUSE WITH EXPOSED JOISTS IN THE CEILING
No excuses to workout!
I'm gonna make this.
"in a very feminine way-how do we fix that MR Lucas?" LoL, made may day
L love your vids Pigmie bro you made me learn all of my flip thanks so much
Next video? How to fix broken knee caps!
Nice job. You could have put the hole a bit higher by an inch to ensure safety...
was lookin for somebody to say this!
Only 4 screws are carrying his entire weight?! Did I get it right?
"wut? a magick saw?" haha
Thank you for this..... I love you
Dude that’s awesome lol
Great video, but I got one problem I found a bar and some wood and have the tools, but where do I get a house?
I think the word "hack" is most appropriate here.
Who else Is here because they half nothing better to do during quarantine
Incredible man 💪
How to make a pull up bar in 5 min?
back flip in5 min, back handspring, flare...
Me: nop
Ah mate ur doin all the right videos right now :)
Insane vid bro keep it up
"The Johnny B technic"😂😂😂
*technique
for god's sake learn how to spell
Very impressive but can you play Wonderwall?
More house hacks Lucas!
Cool.
Hack build dip bars
"When you cant get something to work, just get it to work" -Pigmie
I love his carchter
I have a pullup bar .
I just cant pull myself up .
Yes pullups aren't easy.
lmao why is this guy so funny when he dont even try to be
Facts
Now make the dip station
Love ur vids
i took two ladders and taped a rake and a broom together for the bar.
Would definitely change that curtain rod to a steel pipe that's stronger, and would also have put the holes a little higher that looks like over time it will fail
Which pipe should be used ?& Measurements ?
Holy shit hahahaha it actually worked 🤣🤣 dude, u're amazing 🤣
Awesome,,,I wanna make it too 😁
Hey Lucas, I have brain teaser for you.... How do you perform t bar pull-ups with an at home pull-up bar? With and without the actual t bar. I want to isolate those wing-lats by locking up my arms in a 90 degree angle for the entire pull-up rotation.
2 minutes silence for the people who lost their souls while trying this
this guy looks so familiar omg
he’s got nearly 2 million subscribers but only has like 18,000 views ???
You look like the love child of Andrew Garfield and Mark Rober
This is a great idea for a video. I’m always trying to figure out ways to get my clients to hang, do you mind if I spread the love?
Should use timber locks bud. Drywalls don’t have much tensile strength
He looks like a combination of Zac Efron and Liam Hemsworth...😍
Yes...please hack more builds
That's a dangerous pull up bar...
You should do more of the keven
Jesus Christ Loves You All So So Much!
Gawd Howm HAaaaKK - Da Bearrss
Don't drill your holes as low as he did, drill them about an inch or two higher, so it doesn't break too fast
Also use two stacked, so it's super strong
What man doesn’t own atleast one power saw? Atleast he has a power screwer 😂
Now my dads wondering where the shovel went help
He showed the saw and I died a little inside
hilarious dude!
Smart
Yo nice vid
Says hes gona make a pullup bar in 5 minutes. Video is almost 6 minutes long.
How is this both terrible and also the best pull up bar how to on RUclips? Lol
dude you're fucking hilarious lmao
Dude that bar size gonna fk up your grib
Go for 1.25” diameter.
Me as a kid making stuff in a nutshell