How to Do a Oil Change on a 17-23 GSXR1000

Поделиться
HTML-код
  • Опубликовано: 5 фев 2023
  • In this video I show you How to Do a Oil Change on a 17-23 GSXR1000
    Mobil 1 racing 4T 10w40 you will need 4qts but only use 3.5
    amzn.to/3wXs116
    K&N Oil filter KN-138
    amzn.to/3DJTWoY
    Drain Plug Gasket M14
    amzn.to/3XcyEXY
    Rubber Strap Oil filter wrench
    amzn.to/3X7E3j8
    Suzuki Oil Filter Wrench Socket 09915-40620
    amzn.to/3lbNOzt
    Oil Filter Wrench Removal tool for Suzuki
    amzn.to/3YdSoMf
    plastic pry tool kit
    amzn.to/3yhX8by
  • Авто/МотоАвто/Мото

Комментарии • 48

  • @HemiBurns
    @HemiBurns Год назад +8

    I do the oil drain plug first and then the filter so less oil is left to drip onto the header from the filter.

  • @chutch332
    @chutch332 Год назад +7

    I have never taken off the fairing. Losen two allen bolts by your left foot side of bike. Ease your socket in & take off the oil filter.
    Give it a shot! 😊 Saves a ton of time and as your faring gets older the plastics wont crack when u snap them apart.

  • @hisaanhaq4116
    @hisaanhaq4116 3 месяца назад +1

    Just to confirm you put 3.5 quarts in? My dealer put 3.5 litres in which is more like 3.8 quarts about mid way in sight glass when bikes cold

  • @drakon1300
    @drakon1300 11 месяцев назад +1

    I drain the oil first then remove the filter. I used an empty 1 gallon water jug cut to fit under the filter to catch the oil. Not one drop of oil got on my exhaust pipes.

    • @ACProductions77
      @ACProductions77  11 месяцев назад +1

      I will have to try that next time, thanks for the tip

    • @Daddiboiz
      @Daddiboiz 4 месяца назад

      I did exactly the same thing but with a 2 liter soda bottle. The curvature helped get right under the lip where the filter mates to the engine.

  • @ricksimmonds
    @ricksimmonds Месяц назад +1

    You used the wrong gasket and left the old one on the plug 😅 ... the oem washer is a crush washer and they are a pain to get off tbf

  • @miamimotogroup5371
    @miamimotogroup5371 Год назад +3

    Aluminum foil works better. You can make a funnel below with it

  • @enjoytheride1377
    @enjoytheride1377 Год назад +1

    I usually get the Motul. Is this oil fine ? Mobil 1 racing 4t for a 2018 GSXR1000? It’s nice to just go into Walmart or soenthing and just get hands on the oil right away.

    • @downlowgo_401
      @downlowgo_401 5 месяцев назад

      I’ve used mobile 1 in all my bikes for almost 20 years

  • @user-nk6or9jl4k
    @user-nk6or9jl4k Год назад +1

    🎉🎉🎉

  • @jordanwigley6153
    @jordanwigley6153 10 месяцев назад

    Can you push that header valve in any? I can move mine in and out and im jw if thats normal or if its loose

    • @ACProductions77
      @ACProductions77  10 месяцев назад

      ya you shouldn't be able to move it at all, if you can that means its loose and you need to tighten the bolts.

  • @pumpgas1
    @pumpgas1 24 дня назад

    how about showing how to check the oil level after warm up? you did 90%

  • @chrissummers9800
    @chrissummers9800 8 месяцев назад +2

    3.3 litres

  • @King88_8
    @King88_8 6 месяцев назад +1

    Always drain oil first then filter.

  • @michelebianchetti3471
    @michelebianchetti3471 Год назад

    The manual says to tighten the oil filter 2 full turns after the gasket touch, isn't that too tight? Thanks

    • @ACProductions77
      @ACProductions77  Год назад

      once the gasket touches & you hand tighten as much as you can I wouldn't go past tightening a half turn more with the wrench. as that will too tight and you run the risk of damage when it comes to removing it.

    • @MotoFlows
      @MotoFlows Год назад

      There is reason for 2 full turns, do it.

    • @King88_8
      @King88_8 6 месяцев назад

      Would be impossible to do 2 turns.
      Hand tighten and then max 1/4 turn. For years we actually just hand tighten and never ever had an issue

  • @codylinnartz-ti1lm
    @codylinnartz-ti1lm 5 месяцев назад

    Don’t use kan to much flow it will mess up your engine.ams oil filter have the best filter!

    • @ACProductions77
      @ACProductions77  5 месяцев назад

      ill give that one a try for the next oil change, so far I haven't had any issues with K&N.

  • @NguyenTien-df6os
    @NguyenTien-df6os Год назад

    I change oil and oil filter about 3,6L
    does it right ?
    I don't know much about bike :v
    hope you reply

    • @ACProductions77
      @ACProductions77  Год назад

      the bike only holds in quarts if you put in by the liters then its to much. 3.5 quarts with filter change

    • @izzysykopth
      @izzysykopth 8 месяцев назад

      @@ACProductions77even 3 liters is too much

    • @ACProductions77
      @ACProductions77  8 месяцев назад +1

      @@izzysykopth its not 3liters its 3 quarts.

    • @izzysykopth
      @izzysykopth 8 месяцев назад

      @@ACProductions77 work on your comprehension skills...

    • @ACProductions77
      @ACProductions77  8 месяцев назад +1

      what do you mean? @@izzysykopth

  • @casey3235
    @casey3235 2 месяца назад +1

    that belt is called a strap wrench. fyi

  • @colbykai8622
    @colbykai8622 Год назад

    What is the tool to open your fairing ?

    • @ACProductions77
      @ACProductions77  6 месяцев назад

      plastic pry tool link is in the description box for the tool

    • @michaelheraghty9321
      @michaelheraghty9321 2 месяца назад

      @@ACProductions77 where in the description?

    • @ACProductions77
      @ACProductions77  2 месяца назад

      @@michaelheraghty9321 its the last link in the description, but here is a quick link> amzn.to/4bl0qt7

  • @MotoFlows
    @MotoFlows Год назад

    How does the bike like that mobile 1 oil?

  • @markcontreras4035
    @markcontreras4035 11 месяцев назад

    You didn’t show you draining the oil with the lil bolt on the side

    • @ACProductions77
      @ACProductions77  11 месяцев назад

      i figure that be boring to watch so i cut that out

  • @caseylozano4336
    @caseylozano4336 4 месяца назад +1

    Don’t be a quitter get that old crush gasket off bro

    • @ACProductions77
      @ACProductions77  4 месяца назад

      its definitely getting replaced on this up coming oil change.

  • @MotoFlows
    @MotoFlows Год назад

    You didn’t do the 600 mile break in oil change? Noticed you had 1098 miles on the bike…?

    • @ACProductions77
      @ACProductions77  Год назад +2

      yes i was supposed to do that had a appointment with the dealership, but those 600miles was too quick as it was the next day when i reach those miles and the dealership was booked for a month. so thats why I had 1k miles by the time i made this video.

    • @downlowgo_401
      @downlowgo_401 5 месяцев назад

      @@ACProductions77you should change the oil within the first 50 miles

  • @izzysykopth
    @izzysykopth 8 месяцев назад

    Paper towels leave lint bad choice