※This video does NOT include any paid promotion※ ※ 위 영상은 유료광고를 포함하지 않습니다 ※ 📦 제품문의(Product Inquiries): bit.ly/3I0UR7p (영산볼트, YOUNGSAN BOLT) 🎬 촬영문의(Filming Inquiries): factorymonster2021@gmail.com -I film for the company who are proud of showing how their products are made. -팩토리몬은 제품에 자신있는 소상공인 분들과 중소기업을 대상으로 무료촬영을 진행합니다. Copyrightⓒ 2021. Factory Monster. All Rights Reserved.
Great job with the editing and comentry as always. a small thing to note is that CNC means computer numerical control and is genraly not a manual process. what was shown in this vidieo would be manual Machineing on a lathe also known as Machine Turning. This is not a critacism as even with english being my first and Only langauge i get a LOT of terms wrong and dont know a lot of words.
South Korea produces a lot of Top Quality products! They seem to take pride in what they produce! I love their products. Cheers from Outback Australia...
*_These large bolts were among some of the biggest I have seen._* Those large bolts will be used in even larger construction jobs. Steel components in large structures are routinely connected together with bolts and nuts. In the old days, heated rivets were used. Welding is also used depending on many factors. I have seen where components are first bolted together, then welded for extra strenght. Years ago I saw huge anchor bolts and nuts on Steel legs of Seattle Space Needle. They anchored legs to concrete foundation. They must have been about 12 inches (300mm) in diameter. *_When you need a crane to move a bolt.... the bolt is truly huge._*
@@The_Observant_Eye Thanks for comment. Heard Navy has switched to 48 inch aerial pyrotechnic shells. They cost less than the 16 inch high explosive rounds in use today. Not as effective but sure a whole lot prettier. Even the enemy likes the change.
🇧🇴 Fans n1 👀 bolivia presente aquí 💯 waoo me gusta me encanta ver este tipo de videos 📹 📹 excelente trabajo saludos cordiales desde Sudamérica Santa Cruz bolivia 🇧🇴 👍 👀💯👀👍👍💚👍👍👍👍
Great video !! However there is a typo 5:20. manual cnc is incorrect, it is manual lathe machining, no cnc is seen in video Cnc (computer numerical control )
It can be cnc with out a shroud you know, manually loaded still can be cnc controlledalso it doesn't show who is manning the controls to know, so stop being a know it all db
That screw thread cutter is an amazing machine. Dad was a fitter/turner and used to cut threads on his lathe, each thread would take a minute or more of careful operation.
The dude at 3:12, holy YIKES! To have his hand inside that press holding the bolt while it presses the flashing off the bolt so hard it jumps the tool die out of place. NOPE!
I didn't know there was so much to clothing and heating of these bolts some of these jobs are really dangerous I think California thank you for the video
2:30 lol "Do not try this at home" Well of the approximate 8.5 billion people on this planet, I would hardly think that there's even like 20 people who would try to go through such an elaborate process of making their own bolts at their home
@@Vperedsmotryashii да может для машин каких. Я вот в Арктике живу вот газопроводы у нас диаметром 1400мм (внутри трубы пригнувшись даж бегал🤣) ну вот шаровые краны соответственно еще больше ну не менее 3м в высоту только сам кран, а если привод и колонну установить то все 5-6м в высоту, ну вот однажды разбирал такой, сам шар вытаскивал из корпуса крана вот там диаметр шпилек в корпусе ну точно в 2 раза больше чем у этих болтов. Ну это так для примера.
@@zov1216 Понял. Человечество осваивает всё более и более крупные изделия. Лет через цать карьерные самосвалы будут переносить десятки тысяч тонн руды за раз, причем в беспилотном режиме. Морские суда по 3 км в длину. Боевые танки размерами как хоккейная арена. Тогда и болты станут делать 10 метровые, и в диметре метра 2, надо же колёсики прикрутить к танкам будущего. С наступившим вас Новым годом, мира и здоровья.
@@chir0pter The threads are in a way forged the machine shown is a thread rolller it uses pressure to form the threads, as for the heat treatment yes they do the vid clearly stated that.
I've seen where people keep asking about "Mr. Kim" from the North. I don't think I have ever seen anyone ask, How is the Factory Monster? Also, what king of use would these bolts have?
※This video does NOT include any paid promotion※
※ 위 영상은 유료광고를 포함하지 않습니다 ※
📦 제품문의(Product Inquiries): bit.ly/3I0UR7p (영산볼트, YOUNGSAN BOLT)
🎬 촬영문의(Filming Inquiries): factorymonster2021@gmail.com
-I film for the company who are proud of showing how their products are made.
-팩토리몬은 제품에 자신있는 소상공인 분들과 중소기업을 대상으로 무료촬영을 진행합니다.
Copyrightⓒ 2021. Factory Monster. All Rights Reserved.
Great job with the editing and comentry as always. a small thing to note is that CNC means computer numerical control and is genraly not a manual process. what was shown in this vidieo would be manual Machineing on a lathe also known as Machine Turning. This is not a critacism as even with english being my first and Only langauge i get a LOT of terms wrong and dont know a lot of words.
저분들이 있기떄문에 대한민국이 돌아가는거 겠죠 감사합니다
😅ㅡ
Your channel is my favourite, no music, no bullshit. Just good camera work, nice factory sounds, and humorous subtitles.
Those are nice bolts. Very high quality. I would like to go there and see more details of how those presses work and what type they are.
I have no idea why I love these videos so much. I just do - I watch every one of them. Thank you for creating and sharing!
Glad you like them!
🥰😍🥰
South Korea produces a lot of Top Quality products! They seem to take pride in what they produce! I love their products. Cheers from Outback Australia...
Samsung basically owns the country
I'm here for the technical processes but let's face it, the subtitles are priceless 💪😂👍
That's a big shank on those huge bolts. Thanks for a new video. I enjoy your self deprecating humor. South Korea is BEST Korea!
I use to love Mr. Rogers because he would show you videos like these. My favorite was the crayon factory!
That, as well as the fortune cookies!
semi-artisanal production of the last century
*_These large bolts were among some of the biggest I have seen._*
Those large bolts will be used in even larger construction jobs. Steel components in large structures are routinely connected together with bolts and nuts. In the old days, heated rivets were used. Welding is also used depending on many factors. I have seen where components are first bolted together, then welded for extra strenght.
Years ago I saw huge anchor bolts and nuts on Steel legs of Seattle Space Needle. They anchored legs to concrete foundation. They must have been about 12 inches (300mm) in diameter.
*_When you need a crane to move a bolt.... the bolt is truly huge._*
@@dskillern I guess they could be used for eyeglasses like for King Kong. But, he had pretty good vision for a giant smelly ape like bi-pod.
12 inches??? is that a bolt or battleship ammo...
@@The_Observant_Eye Thanks for comment. Heard Navy has switched to 48 inch aerial pyrotechnic shells. They cost less than the 16 inch high explosive rounds in use today. Not as effective but sure a whole lot prettier. Even the enemy likes the change.
The wings were even bigger then took shelter in the outdoors looking for the bench 😂
Love seeing the manufacturing process
Thanks for watching :)
Those are some serious big bolts. It’s very interesting watching how they are being made. Please make more videos like this! 👍🏻
뭔가 볼때마다 기분이 좋네 ㅋㅋㅋㅋㅋ
Youngson bolt.. they know what they doing.. hehehe..
Loe the video except i can't let 1 statement go, there is no manual cnc machining, there is either manual machining or cnc machining
🇧🇴 Fans n1 👀 bolivia presente aquí 💯 waoo me gusta me encanta ver este tipo de videos 📹 📹 excelente trabajo saludos cordiales desde Sudamérica Santa Cruz bolivia 🇧🇴 👍 👀💯👀👍👍💚👍👍👍👍
Learning from your videos to make big size stainless Steel bolts. Will connect soon.
What amazes me the most, is that the guy at 3:12 seems to still have all of his fingers
Его пальцам ничего не грозит, если сам, конечно, не засунет руку туда, куда не стоит.
I don't see a way he could hurt his fingers there.
Субтитры как отдельный вид искусства
"Раскройте глаза пошире..." тут я выпал со смеха, понимая, что это корейское видео 😂
Hey
@@Factory_Monster простите)
зачет)
Nice video and greetings to South Korea from Italy 💖
내가 제일 좋아하는 채널 중 하나♥
감사합니다 :)
"Asian sized" really got me 🤣
I tried it at home, neighbors angry
Brilliant
That forging machine will punch right through your garage flooring, I tried, had to hire an excavator to dig that thing out of the ground.
Gi ral ㅋ
Like
@@hyphen2612 нужно хорошее бетонное основание под пресс
항상 감사합니다!
항상 시청해주셔서 감사합니다!
Que lentitud!
Brilliant video ! 👍
hi screwsn have you become a flat earther yet?
Great video !! However there is a typo 5:20. manual cnc is incorrect, it is manual lathe machining, no cnc is seen in video
Cnc (computer numerical control )
It can be cnc with out a shroud you know, manually loaded still can be cnc controlledalso it doesn't show who is manning the controls to know, so stop being a know it all db
Amazing how much is done by hand, wow!
항상 즐겁고 재미있게 잘 보고있습니다. 꾸욱!
bruhh the commentary is legend
Still very interesting processes, having worked in similar processes of 20 some years! Like your content! 😊
Very nice. Thank you.
Thank you too!
Very well done video on an interesting subject. Love the little comments during the show. Thanks!!
Good, i like this
Все просто и проверено годами.Хоть и монотонная работа.
Bel video e belle lavorazioni.
🛠️🔩🔧👍👍👍
the sound of cutting iron is like breaking wood.
That screw thread cutter is an amazing machine. Dad was a fitter/turner and used to cut threads on his lathe, each thread would take a minute or more of careful operation.
The machine is a thread roller produces the thread by forming not cutting
Darling Bolt Company is an American manufacturer of all kinds of fasteners. It’s great that they have manufacturing in Korea that means high quality.
ㅋㅋ 집에선 하면 안되는 작업이군요 !~~
Bravissimi che Dire di più che produzione !!!!!
자 그럼 하나 먹어봅시다.
عندي خبرة بهل صنعة تعلمتها بتركيا، اذا ربنا رزقني رح افتح هيك مصنع
Those have to be the most expensive bolts in the world 😮
Great video, thank you!
I wonder how inefficient is having all those hand-made steps. Or maybe not. Just curious.
Good video
Thanks for the visit
Sensacional guerreiros!! 👍👏👏
Good job.
Вот таких размеров болт я клал на свою работу... )
더 많은 중소기업들 소개 부탁 드립니다:)
7:50 "I'll show you the Asian size process real quick" - *shows smaller bolts being made*
Bro did you really
요즘은 볼트특집같은데 U볼트나 ㄷ볼트도 보고 싶어요
Покажите как изготавливают автомобильные свечи зажигания.
Viva a Engenharia Mecânica!
Very industrious
Many thanks for what you're providing, realy they 're amazing for us to understand how the mechanial pieces are mad.
From Algeria🇩🇿🇩🇿🇩🇿
Very interesting, good work.
Small bolt was like mine..😁🍻
Не хвастайся на людях своим болтом, это неприлично!
Is there not internal checks on grain flow on some samples?
Он счастлив😁
The dude at 3:12, holy YIKES! To have his hand inside that press holding the bolt while it presses the flashing off the bolt so hard it jumps the tool die out of place. NOPE!
I didn't know there was so much to clothing and heating of these bolts some of these jobs are really dangerous I think California thank you for the video
Kumlama tezgahı önündeki yükleme vincinin detaylı videosunu atabilir misiniz bana
Interesting video as always =)
Thanks again!
3:10 Hey they don’t call it a punch press for nothing! Great video.
2:30 lol "Do not try this at home"
Well of the approximate 8.5 billion people on this planet, I would hardly think that there's even like 20 people who would try to go through such an elaborate process of making their own bolts at their home
Pakistanis: - Hold my زلجیرا
مرحبا تحية لكم انا من العراق اعمل في مجال خراطة المعادن لو لديكم امكانية تصنيع ادوات قياس للمخارط تكون ناطقة هذا يكون جيد
Wonders aloud, “I wonder what steel alloy they use for these bolts? I’ll bet it’s a good one, e.g. 8740 or equivalent.”
I'm curious to know about how much energy (joules/watts per Kg) is needed to process the raw material into a finished bolt(s)?
저정도 크기의 스크류를 높은 토크로 체결하여 사용하는데, 저런 방식으로 제조되는 거였네요.
재미있네요 ㅋㅋ
3:31 Выглядит безопасно)
А где используются болты такого размера?
@@Vperedsmotryashii да может для машин каких. Я вот в Арктике живу вот газопроводы у нас диаметром 1400мм (внутри трубы пригнувшись даж бегал🤣) ну вот шаровые краны соответственно еще больше ну не менее 3м в высоту только сам кран, а если привод и колонну установить то все 5-6м в высоту, ну вот однажды разбирал такой, сам шар вытаскивал из корпуса крана вот там диаметр шпилек в корпусе ну точно в 2 раза больше чем у этих болтов. Ну это так для примера.
@@zov1216 Понял. Человечество осваивает всё более и более крупные изделия. Лет через цать карьерные самосвалы будут переносить десятки тысяч тонн руды за раз, причем в беспилотном режиме. Морские суда по 3 км в длину. Боевые танки размерами как хоккейная арена. Тогда и болты станут делать 10 метровые, и в диметре метра 2, надо же колёсики прикрутить к танкам будущего. С наступившим вас Новым годом, мира и здоровья.
@@Vperedsmotryashii строительство и машиностроение.
Pretty cool 😎👌
하이텐볼트인가봐요 잘보고갑니다
Has anyone done any Hot Die work? I'm interested to know if you'd recommend this job.
대형 볼트는 로링 설비가 다르군요 좋은 영상이네요 ㅎㅎ
Tertarik menyimaknya
Se recicla el agua??
The bolts make a falsetto symphony
Great stuff. Can you show the nuts or whatever goes on the threads?
Is it necessary to bring the workpiece to sandblasting? Thank you.
hi peerapat, have you become a flat earther yet?
냉간 볼트를 봤으니 열간 볼트를 볼 차례
정답
Those boys had no nuts.
나나산 내는게 신기하네요 빙글빙글도니 생기넹
IF YOU WANT TO improve the forgings'surface quality . please look at me dear.
Abra bem os olhos para ver granalha😂😂😂
Pembentukan benang pake mesin extruding
Great video. Why do they only forge the head and not the threads? Also do the threads get a hardening treatment?
Precision :)
@@Factory_Monster What? That didn’t answer either question…
@@chir0pter The threads are in a way forged the machine shown is a thread rolller it uses pressure to form the threads, as for the heat treatment yes they do the vid clearly stated that.
ㅋㅋㅋ유료광고 당연히 아니겠죵ㅋㅋㅋ 유툽보고 누가 대형강철너트를 주문해욬ㅋㅋ
Видно, что качественные. Болванки звенят, стружка мелкая отлетает, резьба накатная. Соседей научили бы, а то они из пластилина лепят крепёж)).
Хорошо бы самим делать а не покупать у Китая
Я вообще думал, что резьбу так резцом и нарезают на станке.
👍👍👍
디트로이트로 가는거 보니까 로보캅 부품이겠네요.
I wish I had a machine at home to make bolts.
I've seen where people keep asking about "Mr. Kim" from the North. I don't think I have ever seen anyone ask, How is the Factory Monster? Also, what king of use would these bolts have?
hi aland, have you become a flat earther yet?
Don't try this at home? Nah, I'm definitely going to try this at home one day.
Ola.boanoite.asisto.de.santa.maria.da.vitoria.bahia.e.lindo.ver.fazer.para.fozo
That's a really old school process
I'd like to imagine that is what being used in the ork bolters of the grim-dark universe of 40.000k.
hi artypnk have you become a flat earther yet?
Que trabajos tan bien hechos👏👏👏👍
always me as a kid: "nORtH oR sOUtH/ KOreEr?"