I put the same speakers in, but went with the SSV Works BR-2B65U enclosure because they don't hide behind a plastic lid like the Mabett enclosures. Just my Personal preference, not a dig on Maybett. Great video, thanks for posting.
To whomever upgrades their Bronco B&O system thinks it sound better with their new replacement speakers etc… I am glad it does for you. Personally, I have upgraded other systems on other vehicles and never noticed a difference. Then again. I have poor hearing… and upgrade muffler etc… so any “noise” in the stereo system, becomes moot after road, engine, vehicle and muffler noise.
Thank you and yes, I am happy with them. A lot of people say they didn’t notice a huge difference but when I ride in my friends Bronco (without them), I immediately notice a difference (especially top down or windows down). You can always add an amp to get even more effect.
I personally think it is worth it. I ungraded all the factory speakers and that made a big difference. I also added the Kicker key amp and replaced the sub but I have the B&O system. Sounds way better.
Check the connection to the speaker. Mine was a little loose when i firs did it and would go in and out. I redid the connectors and it worked great. If the whole passenger side is out including the front speakers, I would check your fade settings.
Can you tell me the cost of the boxes, and the model and cost of the speakers, there are companies outbthere that sell a lod with the speaker already installed for $400. Dont know if its worth it to do it your way. Nice video
Hi - thanks for the question. On Amazon right now the speaker pods look like they are $129 with a $10 coupon. You can get a great pair of speakers for a little over $100. That would be half the cost of the $400 you mentioned. Hope that helps
To be honest, yes my kids in the back seat think it is too loud now but when they aren’t with me and the soft top is on….I can actually hear the speakers. (Can also be easily adjusted with “fade”)
Yes because your original 4" speakers were set from Ford as tweeters due to their size. Forscan will allow you to make them full range speakers+tweeters and allow you to tweak the sound filtering. There are lots of RUclips videos that provide great tutorials on this.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I searched everywhere for the wire connections. You nailed it. Massive help. Thank you.
Just what the doctor ordered. Great vid. Worthy project. Thanks.
I put the same speakers in, but went with the SSV Works BR-2B65U enclosure because they don't hide behind a plastic lid like the Mabett enclosures. Just my Personal preference, not a dig on Maybett. Great video, thanks for posting.
Thanks for the reply and recommendation. I wish these had less plastic as well.
I paid around $100 USD more for that "luxury" so take that for what it's worth, both seem to be really nice speaker enclosures. @@UnitedStites
Nice video! Can you post the link to the Kicker speakers you got to go with these too? Looks good!
To whomever upgrades their Bronco B&O system thinks it sound better with their new replacement speakers etc… I am glad it does for you. Personally, I have upgraded other systems on other vehicles and never noticed a difference. Then again. I have poor hearing… and upgrade muffler etc… so any “noise” in the stereo system, becomes moot after road, engine, vehicle and muffler noise.
Dude, a thumbs up and a comment for the algorithm simply for the fact that you do NOT have fucking background music.
Thanks for sharing - ordered these
Do these speakers add any more bass to the sound stage? or is it more of an increase in volume from the back.
Do these have a good water proof rating like the stock speakers have?
Really good video. I am thinking of getting these. Are you still happy after 4 months with them?
Thank you and yes, I am happy with them. A lot of people say they didn’t notice a huge difference but when I ride in my friends Bronco (without them), I immediately notice a difference (especially top down or windows down). You can always add an amp to get even more effect.
The audio quality is the single most thing I hate about my Bronco.. was the upgrade worth it?
I personally think it is worth it. I ungraded all the factory speakers and that made a big difference. I also added the Kicker key amp and replaced the sub but I have the B&O system. Sounds way better.
I replaced mine and everything worked fine, now no power to passenger side. Any suggestions.
Check the connection to the speaker. Mine was a little loose when i firs did it and would go in and out. I redid the connectors and it worked great. If the whole passenger side is out including the front speakers, I would check your fade settings.
@@UnitedStites just the rear. Even hooked factory speaker back up and nothing. Will recheck connectors. Thanks.
Why not just drill,the wire hole to the same size as factory and us the whole harness?
The B&O system comes with JL Audio speakers? That's a little, strange, right?
No, I had swapped the factory B&O 4 inch with JL audio 4 inch speakers originally to see if it would make a difference.
@@UnitedStitesdid it make a difference?
Never mind you said it all lol
Can you tell me the cost of the boxes, and the model and cost of the speakers, there are companies outbthere that sell a lod with the speaker already installed for $400. Dont know if its worth it to do it your way. Nice video
Hi - thanks for the question. On Amazon right now the speaker pods look like they are $129 with a $10 coupon. You can get a great pair of speakers for a little over $100. That would be half the cost of the $400 you mentioned. Hope that helps
Well is it much improved now?
Did you need to mess with forscan at all
To be honest, yes my kids in the back seat think it is too loud now but when they aren’t with me and the soft top is on….I can actually hear the speakers. (Can also be easily adjusted with “fade”)
Yes because your original 4" speakers were set from Ford as tweeters due to their size. Forscan will allow you to make them full range speakers+tweeters and allow you to tweak the sound filtering. There are lots of RUclips videos that provide great tutorials on this.
Can you send some of those forscan videos? Thank you
Which adapter you took for the speaker ?
Mabett comes with speaker connectors