KOPPANG 5 Drawer Chest IKEA Tutorial

In this tutorial, I'll be showing you step by step on how to assemble the Koppang 5 Drawer Chest from IKEA. This IKEA 5 Drawer Chest could be a bit tricky to build so if you need some help, this video will guide you along with the instructions.
Wall hardware demo - 12:11 - • Tutorial | Malm 6 Draw...
Like and subscribe if you found this IKEA tutorial helpful! Thanks for your support.

[@Ericamann24]

Thank you so much for creating this video! It was extremely helpful, I couldn’t have built it as quickly without it!!

[@22oonim]

I just finished assembling 3 of these KOPPANG chest of drawers and for the first time I used youtube and your video instead of printed guide. Reduced assembly time by at least 50%. Thank you so much.

[@Lordknowsall]

You did such an amazing job and made it so simple for me thank you so much, I don’t normally comment on videos but for you man you the best

[@its_mesandra]

I just finished building this drawer using this video, it was very helpful and made the assembly a lot easier, it took me ab 2 hrs.

[@jayana7186]

So Ive just bought this and am putting in together, but some of the holes are different and the wood plinth, there is only one and one on the instructions also, im wondering if what the provide to the uk is slightly different 🤔 surely it would be the same

[@51n79]

If anyone else is stuck at 2:00 in this video, the boards have a specific left and right side otherwise the dowels/screws won't line up. I thought mine was defective..

[@yilmaztosun4858]

Was stuck just right there. Thnx buddy👍🏻

[@MrKeem07]

not all heroes wear capes. Thank you

[@xxGR33NIxx]

This comment needs to be pinned at the top! I now need to cancel my replacement order and try assembling again

[@s.aliciawarren4283]

Are the 4 posts supposed to be flush with the side pieces? We can’t figure that part out bc the pegs/screws won’t fit properly!

[@rubengonzalez3433]

The manufacturer instructions have it wrong! Was stuck on it for a while

[@Adon345]

been waiting over a month for this dresser and you helped a lot with the setup. ty

[@PolosRavros]

Thank you very much for your easy explaining and assembling of this Koppang Drawer Chest! I bought this week one and did it successfully step by step of your video!

[@davethompson5515]

It takes about 2 hours if you are good at these things. The paper instructions are fine but the video helps. The screws can be difficult to get in, especially with the shallow Phillips heads. I'm sure you would get a lot faster if you assembled these things for a living 😄

[@fidelgarcia5648]

Thank you for this video. I wouldn't have been able to put my drawers together without it. The instruction manuals that come with the drawers are no use to me. Your video was a great visual aid

[@xspyguy]

Thank you. It is so much easier and faster to follow the video.

[@squin6959]

You’re like the only person on yt I trust for ikea furniture assembly. Could you do a video on how to assemble the Hauga Bookshelf? :)

[@2golddetecting]

Excellent job! I followed you while putting mine together. Thanks for making this video!

[@irinamedvedeva1287]

A huge THANK YOU for your video!!! I did mine KOPPANS 5 Drawer chest!! 🥳

[@timstratton8866]

You're the man! Easy to follow and very thorough...

[@from_ash2dust834]

This video help me put it together! I was struggling with the manual. Thank you for making these videos!

[@isabelneacato1275]

so glad i found this video it was so helpful! thanks!

[@a.p.h5898]

Absolutely Spot on......THX 4 this super Video, saved me a lot of time!

[@zainabkhan1830]

Can you please show us the screwing and drilling too next time

[@s_lavea]

This was perfect and helped me heaps. Thanks

[@annrosethomas846]

Very helpful video, so much better than the manual .. awesome !

[@lonicloutier7968]

Thank you this was so helpful!!! I still can't get my little drawer to get in the space (it's to small) and the big drawer that goes under the two wood pieces doesn't fit either (too big) and I've tried all the other drawers to see if they'd fit. Any suggestions?

[@MirkwoodCrow]

Did you figure it out?

[@Tara-w1b]

Are the drawers supposed to be wobbly before you add the backing on? I am not sure if I have gone wrong somewhere!

[@emmapeacock9061]

Saved my life

[@AshKrishna-xi8uc]

Very helpful. Thank you

[@ericlucier3980]

You were a life saver!

[@1980process]

Thank you soooo much you are way better than them incomplete instruction manual. Great job sir

[@Bee-ot7qe]

Thank you! Very helpful

[@Burgerman1171]

do I need a drill or is it optional?

[@xxxbigguy1983xxx]

Don't need a drill

[@ib961]

@@xxxbigguy1983xxx was it easy to assemble without the drill?

[@beautifulrosa415]

Thank you so much, this was so helpful!

[@ropeysubstance1719]

mine only has one wood beam that goes across, yours has two. is that normal? i think mine is from 2018 manufacture date

[@BorneoAgent]

Very helpful, thank you!

[@annawahby]

Thank you VERY helpful

[@josemcamarena363]

Excelente, gracias y saludos 😊

[@fsthean962]

I am stuck with the second step, the 12 screws are not able to go in fully. Tried all screwdrivers and drills, just can't help. Wonder what screwdrivers you used?

[@hannahteerman5659]

confusing video, please make the subtle details clearer next time.

[@apeso25]

You are a tank

[@Delta_EU]

For the screws in the legs at 0.50 what size screwdriver do I need?

[@adamrodda5024]

Why aren’t my drawers sliding in and out flush? None of them line up properly. Why is this?

[@TheOtakuDon]

Is there a gap with the first draw.

[@stacygarcia4164]

Thank you for this video! I was able to build this without the help of my bf😬😬😬

[@helenelabat6022]

Thanks a lot!!!!!

[@antonioaquilino77777]

So confusing. Close up shots are very helpful in these videos. Just because some things are visible to you in the moment doesn’t mean that they are also visible to your audience

[@SmoothKatDaddy12]

Read a book

[@AleiatheEnchanted]

I set it up without the drawers but it feels flimsy without the drawers in place yet. Is that normal? Or is it defective that I have to return it?

[@its_mesandra]

IKEA furniture will always be a little flimsy since it’s more economical furniture

[@jessicafelicio5475]

Do we really need a drill?

[@pijamacafe997]

Thanks

[@dinayahill313]

My draws do not fir

[@boblonzo1060]

Love u

[@valdeezy26]

anyone use this as a tv stand?

[@Morontaa1]

I am stuck at 2:54

[@pDOT508]

🐐

[@pijamacafe997]

Mis gavetas no entran 😢😢

[@AngelaClark-l1x]

Perez Edward Brown Donna Robinson Jeffrey

[@DM-fp8uw]

Do not rely on this video. He says you need a flat head screwdriver only, but you need at least 3 different types and they are odd shapes. Some of this is useful, but not close to a substitute for the instructions.

[@maxxu4638]

hi there

[@maxxu4638]

how to contact you

[@ivahardy1810]

Amazing video. Thanks you very much