SOLIDWORKS CSWA EXAM QUESTION #5
HTML-код
- Опубликовано: 25 июл 2018
- JOIN CHANNEL FOR MORE VIDEO!!!
In the second question also change the value of fillet-radius.
drive.google.com/file/d/11s1f...
Here you can learn more about Solidworks and AutoCAD
SOLIDWORKS CSWA EXAM QUESTION #1--- • SOLIDWORKS CSWA EXAM Q...
SOLIDWORKS CSWA EXAM QUESTION #2--- • SOLIDWORKS CSWA EXAM Q...
SOLIDWORKS CSWA EXAM QUESTION #3 (Sheet Metal)--- • SOLIDWORKS CSWA EXAM Q...
SOLIDWORKS CSWA EXAM ASSEMBLY QUESTION #4---- • SOLIDWORKS CSWA EXAM A...
SOLIDWORKS CSWA EXAM QUESTION #5-- • SOLIDWORKS CSWA EXAM Q...
SOLIDWORKS CSWA EXAM QUESTION #6-- • SOLIDWORKS CSWA EXAM Q...
SOLIDWORKS CSWA EXAM QUESTION #7-- • SOLIDWORKS CSWA EXAM Q...
AutoCAD 2019 3D Tutorial for Beginners. --- • AutoCAD 2019 3D Tutori...
AutoCAD 2019 2D Tutorial for Beginners. --- • AutoCAD 2019 2D Tutori...
AutoCAD 3D Model Practice --- • AutoCAD 3D Conflat Fla...
Crank Shaft-Solidworks Model --- • Crank Shaft-Solidworks...
Solidworks Practice sample and Section view #1---
• Practice Features for ...
Solidworks Practice sample and Section view #2---
• Practice Features for ...
Solidworks Practice sample and Section view #3---
• Practice Features for ...
AutoCAD: HOW TO MAKE GASKET? --
• AutoCAD: HOW TO MAKE G...
AutoCAD: HOW TO MAKE WRENCH?---
• AutoCAD: HOW TO MAKE W...
AutoCAD Isometric Projection---
• AutoCAD Isometric Proj...
Orthographic Projection : How to draw right view and section view?--
• Orthographic Projectio...
EXCELENTE!!!!!! DIOS TE BENDIGA!
Correction, my result was 3198.58g, anyone else got the same result?
Same, he did not change the fillets
Same results thanks
Nice video! This one is on the exam as well
Thanks! you can share it with your friends,of course, if you want )
Very pleasant to learn 😊
Thank you,friend
Hi,
Thanks for the tutorial.
However, with question 7,in section HH view you didn't edit the R2x4, and with the front view you didn't add the 85mm dimension which drives the R2.50x15 dimension.
The total mass result I obtained was 3439.20g.
Thanks
JL
mine came 3342.83!
nice video with the new value fillet the final result is 3198.95g
But I got 3198.94g???
3198.55
3198.88 g lol what's the difference?
Masa = 3198.58 gramos
@@josed.perez-aparicio4017 same, 3198.58.. what the heck? so many different answers.
Hi i would like have the pdf for this for practice
Hi Can I get the pdf ?. link is not working
hi... i’m taking the test in a few weeks, are these the same questions that will be on this years test? thank youuuu sooo mucchhhh
hello?
@@natashajohnson8504 Hello my friend. This sample was 3 or 4 years ago in exam. Now there can be different types of models. But the main commands are same. So if you will explore more videos of mine or in other channels, you will pass. Hope you luck.
Thanks for watching!
thank you! do you know if any of these will be on the test but maybe with different numbers?
@@natashajohnson8504 Most probably there will be new tests.
New fillet radius is changes to 2mm from 5mm. Answer that I have is 3198.86. Also a Quick Question, for Fillet R5 X 4. Aren't we suppose to fillet the inside edges too since it says 4? if they just talking about outer edge it should be 2?
Although there's nothing on the sectional view for any inside fillet
thanks @@ankitsatija6647, I got the same answer. and I think the reason thay said R5 X 4 and not R5 X 2 is due to when it is shown in section view you can see all 4 fillets, (also the other 2 that been mirrored and revolved )
I got it as 3198.58. Are you aware if partial points are awarded in such cases when the answer is off by some margin?
Thanks !
Tirthesh Shah +\-1% variation is allowed in the exam your answer will get full marks within range in CSWP EXAM. For fill in the blanks only
@@ankitsatija6647 thanks for the reply
I am confused, why did you put 105 degrees instead of 15? Similarly, I have sent you an access request to your google drive.
Thank you for such an informative video!
drive.google.com/file/d/11s1fWFMAibNyDDci6AwTAYFj3EEysaZH/view?usp=sharing
new link. Take from here
90+15=105 . Actually it depend on your reference . In my case it is 105
What I did was drew a construction line (horizontal) top of B reference length. Then choose the angle line and construction line and made angle 15 degree.
I try to replicate the drawing as much as possible to minimize any stupid mistakes or errors lol
@@javocad5643I understand that know. THANK YOU FOR THE AMAZING STEP BY STEP GUIDE LINE.
My man! Will you be kind to share those PDF's?
drive.google.com/file/d/13eISqhBdMo9uAbZUXG0BvesJ-Vp-8IZf/view
Here you can find it!
@@javocad5643 Thanks! Just yesterday i've got my CSWA certificate. 240 out of 240 points! Your video's helped a lot!
@@venom1st I'm glad I could help you. Share channel with your friends, of course if you want. Let me get inspire ))
@@javocad5643 hey could i check those out as well? Ima be taking my cswa soon too im scared!!
@@carlosflores4380 And how was your exam? :D I think it is too late to answer ,but I was busy with my education
good job, can you send the PDF files please
drive.google.com/file/d/11s1fWFMAibNyDDci6AwTAYFj3EEysaZH/view?usp=sharing
Here you are
Can anyone provide the pdf link.. The link in the description and the comment doesn't work
@@KhayrulIslamKhalid I can share the document with you by email
AT 3:27 YOU ENTERED 25mm but it took 0.03m
can you give access to the drive link please!?
drive.google.com/file/d/11s1fWFMAibNyDDci6AwTAYFj3EEysaZH/view?usp=sharing new link
@@javocad5643 Thank you so much!
@@mohammedshafeeq7681 You are welcome
can you send the PDF files.
drive.google.com/file/d/13eISqhBdMo9uAbZUXG0BvesJ-Vp-8IZf/view
Here you can take it.
Can you send your email id
@@javocad5643 could you accept my request on google drive? I just now sent it .Thanks .Karan Naik
@@karannaik329 drive.google.com/file/d/11s1fWFMAibNyDDci6AwTAYFj3EEysaZH/view?usp=sharing new link
I want this CSWA exam PDF
??????
Can I have the pdf please
drive.google.com/file/d/11s1fWFMAibNyDDci6AwTAYFj3EEysaZH/view?usp=sharing
I hate it when people make these videos and don't talk. It would be so much more helpful if you explain each step.
u forget Change fillet , Q7 R5 -> R2 ?
I commented it in description. Thanks for your attention.
@@javocad5643 WHAT IS RIGHT ANSWER? I FOUND 3198.94