Wonderful Homemade Jack for Car
HTML-код
- Опубликовано: 22 июл 2018
- Jacks for your Workshop or Garage
SUBSCRIBE-goo.gl/gYkBdJ
Other video!!!
Popular videos-goo.gl/KZCCXW
Awesome life hack -goo.gl/SCZiAr
3 Drill Machine Life Hacks You Should Know-goo.gl/7Ckdfh
How to make -goo.gl/g2Ph4P
Welcome to MR SUNY channel
Our channel include of guiding videos:
- Life hack
-DIY
-How to make
-Awesome ideas
-Tips
You are interested in handiwork, craft or you just have nothing to do, haven't you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost! 
Развлечения
The jack had to be short enough to go under the car and that tire was not flat. If that tire was flat and the wheel rim was nearly touching the ground, the jack would be too tall to fit under the car. Also the jack will not raise high enough to get the tire off the ground. It is way too slow. And even in the best of conditions with the car sitting on a flat surface, it seems too dangerous
К вечеру одно колесо поменяешь с таким домкратом
Greetings from London! 🇬🇧
You sometimes have some good ideas, but I wouldn't trust that with my life.
a jack is only a lifting device, you should never trust it you should use an axle stand as the safety support
why not"? he's got the other 3 wheels on the ground, if the welds are bothering you just place a large rock next to it as a jackstand.......UNDER THE FRAME,,,,,,,,,,looks safe to me
Did he ever check bolt and nut strength rating?
Лайк за старания! Руки не отсохли крутить???
Вот интересно, комментарии о целесообразности в основном только на русском языке. Что это, рациональное мышление? Сам тоже в шоке, от бессмысленности устройства...
Oi
Дурь...домкрат с таким мелким шагом и из бытового болта из дрянного металла с метрической резьбой не получится. Это, абсолютно, неудобно и небезопасно..Резьба может " слизаться" в любой момент..Вы, там, все тупые что ли?😁
Nice tool bro
Keep up the excellent work and generating the crowd!
Parabéns pelo vídeo ótima idéia.
I thank you. You vidéos is clear
New kind of 'dongkrak' I like it 😂
Awesome.
Absolutely frightening. If you raise the bolt too far it will simply fall out and the car will come crashing down.
Большое спасибо за прекрасный проект! Просто и дёшево и гениально!👍
Finished product on application, that's a good work out....
Опять шедеврально-бестолкавая идея )
Inteligente a sua ideia gostei.
رائع 👍
I love the concept, I was looking for inspiration on a similar but very different project.
Btw who cares what others think. Keep making dope stuff, just because you want to.
Who cares what other think? I am all about ignoring hater but please don't ignore safety. Not only are you putting yourself at risk but anyone who decides to go and replicate this and ends up overloading it past it's capacity. It's a good design but make sure it can withstand the load capacity. It won't take must to sheer off those threads
Excelente 👏👏👏👏👏👏👏👏
Muito bom, parabéns 👏
Наверно все деньги ушли на покупку машины и не осталось на покупку домкрата.)))
Good idea!
*awesome work sunY*
good work👍
Gabo-G visit
Show de bola👏👏👏👏👏👏
Meus parabéns amigo que ótima ideia viu
I'm starting to think that Sun Y is the local hardware shop where he lives.
ډيرښه زبردست بيلکول منلې شى ډيره ښه تجربه ده good tank you
👍👍👍
Your idea is very fantastic.
good video
Very simple and useble
A pair of lubricated washer under the nut and the rising will be easier.
Gracias muchas Gracias
Está muy bien tu trabajo... excelente diría yo ☺️ perro si le pones un balero de carga abajo de la tuerca que haces girar para que suba el automóvil te será más fácil y con menos esfuerzo 😏
Yo tengo dos de diferentes tamaños (altura) que ocupo como gato para levantar el coche y funcionan muy bien.
Ánimo y mis más sinceras felicitaciones 🍾
Brilliant idea bro 👌👌👌. . . 👍👍👍. . .
Brilliant idea brother 👌👍
dunno if anyone gives a shit but if you guys are bored like me atm you can watch pretty much all of the new movies on InstaFlixxer. Have been watching with my brother for the last few months xD
@Joseph Timothy definitely, I have been watching on instaflixxer for months myself =)
@Joseph Timothy Yup, I have been watching on InstaFlixxer for since december myself =)
@Joseph Timothy yea, been watching on instaflixxer for months myself :)
@Joseph Timothy Yup, have been watching on InstaFlixxer for since december myself :D
Could have just bought a 2 ton bottle Jack for $15, save the time and effort, not to mention being more efficient and just as compact.
its diy project...did u read the title??
@@oppaone9617 did you read the part about saving time an effort. One of the most stupidest pointless DIY considering a bottle jack already exists for next to nothing in cost.
bottle jack is for temporary lifting but this is sturdy enough to be car stand
@@duwonrhee3589 and a set of car stands can be bought for $20.
@@sullygully1976 yeah but can't be fine tuned for the height. you will understand if you use them
Thats a good idea for a level stand but not a jack. It didn't go up high enough so you had to put something under the car to support it while you added extra wood under the jack itself.
Simple but not effective. but the car and tires are excellent!
This actually is a smart idea. Would you use it in every situation? No... but if your car didn’t come with a jack or you wanted something small to keep in the garage? Yea it looks sturdy enough. You wouldn’t want to lift it much higher though, and you shouldn’t leave the car supported without a jack-stand anyways.
Not safe, my friend.
Varian Styles hay
That's you you slip 2 jack stands on each side.
Waste of time. This thing is not stable, unsafe and only damaging the car. Better use the jack from the onboard-toolset.
Bingo!
👻👻👻
Now imagine this on the suspension you got a lift kit bro 😎
Very good design
exelente amigo...mi saludo fraterno desde venezuela. seguro que me estoy construyendo una maquina como esa...
No son muy seguras
@@cynthianahir4896 si las haces con un tornillo de acero al carbón y degrado 5 te funcionan a la perfección y debe ser por lo menos de 1 pulgada de grosor y mira, cuál sufrir, haré un video de la que hice hace unos años y aún funciona...
Solamente hay que ponerle una guía por dentro y no batallas para los trabajos o incluso solamente para cambiar una rueda 😏
"9 hours later"
Very very best vedio
Well...I guess if you're stuck with no jack at all, it beats a poke in the eye with a sharp stick.
Unfortunately or fortunately, here in the U.S. we can buy an imported hydraulic bottle jack for a 1/4 of the price we would pay for the steel bolt and nut of that size alone. But it is still a great use idea, if only our steel prices were not so Sky High!
It is a great and simple idea !. But , one question :
I didn't see when the thread was made into square washer ?. I think that the treathed must to be all way trought to make it heavy duty , isn't it ?. At least two square threaded , this way the bolt would have a line vertical positional and security ?. ¿ what do you think ?.
Thank you for your work , teachness and sharing. Health for you !
Practice ur welding more I would suggest it
Cool 👌👌
10 YEARS LATER
Love you budi 👍❤️
More than perfect. I am stupid. However, I got the idea.
Amazing!
For that , I'll just stay with my car factory Jack is much safer
А велосипед не пробывал сделать ?
Игорь Философ, ну молодец ведь! Согласись.
Игорь Философ
Кому задан твой вопрос-ни-о-чем ? Автор не поймет твой сарказм. А тогда смысл юморить?
Ну как вариант сгодится.
Not good, the thing was bent at the end and one plank went mysteriously to 3. go buy a jack, they are not expensive. It beats having your brake disc buried in the driveway with your hand under it.
jon doel,,,,,,,if he went and bought a jack like you or i would do,,,,,,,,,,he wouldn't have a reason to make this video.....
Não vejo problema, desde que feito por um soldador profissional
احسنت النشر
Amazing and magic, those pieces of wood got more. Plus this is a death trap of Magic tool. This is how to make your girlfriend single.
I like when other guys' girlfriends become single
very goood
ilove you
#iraqi
Good DIY idea
Te morís de angustia con tu invento, es más fácil parar a alguien que te presté un gato y no envejecer levantando el auto con esa artilugio
Wagenheber wäre natürlich zu umständlich
Si tenes un auto como ese comprate un gato hidraulico directamenteeee😲😲...buena idea!!che pero soldaste una tuerca adentro del caño??supongo!!!
It was too good
For my opinion the screew are not stable. It's very dagerous use it your lifting device for have goods.
petr hanak,,,,,,,,could you please repeat this in ENGLISH........
1:00 yeah don't bother
Bello
Takes nearly as long to jack the car up as it did to build the jack!
Nice vedio
Liked and subscribed for the idea. Good effort my friend.
Really?
@@z2a119 in the world or criticizers and buyers he is the innovator.
Super
But my car tool box is already occupied with jack 😜
well, if you make this one you'll have 2 jacks..........the only problem is,,,,,,,will both of them fit in the car tool box......let me know how it works.......looking forward to hearing from you.
yard limit
My car tool box has no extra space for another jack
वेरी गूड
At least use a ratchet wrench. Lol. That's fine on concrete flat place to work. It's be hell on a slope. Or incline.
GOOD
А ниву поднять долго надо крутить?
Good
xupop ideaa😁😁😁
Mr suny good i
How many of these did you use to lift the car? One is impossible, how did you put under more wood ;-)
Ten million turns.
Nice
pliz make... screw nut jack
Совсем, видать, житуха тебя скрутила.
What about just using the jack the manufacturer supplied
Good jack
But update hand pump
SÚPER**👌 : )
I'm waiting for you to show us how you got it under there and how after half way up you stacked wood under the jack. You clearly couldn't fit jack under car and then it wasn't tall enough. Good invention but not for your BMW
جيد جدن
No ofense for the footage, but ain't safe at all, it's a fact in so many ways.
too small and too slow for a car jack but would be an ok design for a floor jack under a house.
What is the bolt and nut size, please specify.
It could be go lower or not?
Le falto pasar en el video donde le solda la tuerca adentro del tuvo
Idea is appreciated but I think car would be slip I m afraid it's not safe.
What is the solution of safe the indl and troops.
Kindly give the video