I have a trick for you not to get holes on the surface of your cast, before putting in the plaster you spray the mold with a mix of water and liquid dish soap you need only a few drops of it in the water, this helps break the surface tension of the bubbles. I do this all the time and the results are perfect. Love that black paint. Have a great weekend.
Wow these are spectacular!! Love how you painted them both and the resin piece completes it just right! Can't wait to see the other videos 😍! Thank you Steve 😊!!!
Oooo those hands are really cool that you made! I love them! I was thinking if I got that mold I could make it out of resin which would be different than you using plaster but I’ll keep you posted on how it turned out. You always have the greatest ideas. Thanks for being such an inspiration
I casted my mothers hands. Did the glue coat, dried, then painted with acrylic paint. How long would you recommend I let them dry before sealing? Thanks so much!
i have got that mould but have not tried it yet.i am going to use the new powder they have out now. i just hope it comes out as good as yours did,i dont think so as i am no where as good as you are .love all your hints and ideas.🙋♀🐨🦘🦘
Steve, have you ever tried using your Dremel or even some hair clippers (or similar) to vibrate the bubbles out? It's fairly quick and effective to just hold the running 'motor end' against the filled mold, or the board or table the filled mold is sitting on. As long as the motor isn't too powerful, it works really well. Thanks for another fun video!
Absolutely gorgeous!!! Love the fairytale blue... I was thinking what a nice piece to put on a side table, then you added the crystal balls to them and WOW!!!! What a focal point piece!!!! Now my husband is going to be MAD because I'm ordering those molds even after he said no ordering anything this month.... Stay safe, you do you, and stay creatively crafty👍👍🔔🔔🦋🦋
Thanks for sharing this man! I do a lot of sculpting and then moldmaking (I use monster clay mostly), but I can never figure out how to get that "finished" look when painting plaster til I saw this video. Cheers! And many thanks. And HELL YEAH: 80 bucks for the black speckled one? That's a BARGAIN! :)
Been meaning to pop over and watch these videos for a while now, but haven’t found the time! Loving the hands, need to get these onto my ‘to try’ list 😅 thank you Steve, see you in the group 🤗
Can i ask you something pls if i may. Why my plaster after it cures its like and leaving on hands poweder feel and white dust? Doi do something wrong? Thank you xx 🇨🇾🦋✅💜👑🌈🌻
@@SteveMcDonaldCrafting hi there and thank you. You are right i poured some water then the plaster it had warming and gettin hard then pour second portion etc 🌻🌻🇨🇾🇨🇾🇨🇾🦋
Thanks for watching! please check out this next video for more fun crafting projects: ruclips.net/video/Nb5AhZQWr6E/видео.html
I have a trick for you not to get holes on the surface of your cast, before putting in the plaster you spray the mold with a mix of water and liquid dish soap you need only a few drops of it in the water, this helps break the surface tension of the bubbles. I do this all the time and the results are perfect. Love that black paint. Have a great weekend.
Thanks you I love a great tip I will definitely be trying that
Wow i will ret rgis it sounds good thank you
Pls tell the name of liquid dish soap
So just like fairy liquid in a spray bottle on the surface 😊 I'll try it
@littlelarges4807 Yes, but diluted, not straight as it is too strong.
Wow these are spectacular!! Love how you painted them both and the resin piece completes it just right! Can't wait to see the other videos 😍! Thank you Steve 😊!!!
Wow!!!
The paint pallettes were great, then adding the 'crystal' balls...
Wonderful!
Those look fantastic! I love those crystal balls, too!
I made a succulent pot with the open hands out of cement and 2 gloves in a bowel. Turned out really good
Nice. I just watched the resin video and it linked me here. Great combination. Thanks for the bubble-ridding ideas
Wow I love them absolutely stunning with the crystals Steve 😍❤️
Oooo those hands are really cool that you made! I love them! I was thinking if I got that mold I could make it out of resin which would be different than you using plaster but I’ll keep you posted on how it turned out. You always have the greatest ideas. Thanks for being such an inspiration
I would love one of those
I casted my mothers hands. Did the glue coat, dried, then painted with acrylic paint. How long would you recommend I let them dry before sealing? Thanks so much!
i have got that mould but have not tried it yet.i am going to use the new powder they have out now. i just hope it comes out as good as yours did,i dont think so as i am no where as good as you are .love all your hints and ideas.🙋♀🐨🦘🦘
Beautiful as usual xxx
Steve, have you ever tried using your Dremel or even some hair clippers (or similar) to vibrate the bubbles out? It's fairly quick and effective to just hold the running 'motor end' against the filled mold, or the board or table the filled mold is sitting on. As long as the motor isn't too powerful, it works really well. Thanks for another fun video!
Absolutely gorgeous!!! Love the fairytale blue... I was thinking what a nice piece to put on a side table, then you added the crystal balls to them and WOW!!!! What a focal point piece!!!!
Now my husband is going to be MAD because I'm ordering those molds even after he said no ordering anything this month....
Stay safe, you do you, and stay creatively crafty👍👍🔔🔔🦋🦋
Can ye drill holes in this casting? I made this exact mold cast but I wanted to mount it. TY
Thanks for sharing this man! I do a lot of sculpting and then moldmaking (I use monster clay mostly), but I can never figure out how to get that "finished" look when painting plaster til I saw this video. Cheers! And many thanks. And HELL YEAH: 80 bucks for the black speckled one? That's a BARGAIN! :)
How long should I let the pva glue take dry before I can paint it?
Love them ❤️ They would be great as a Halloween ornament lol 😆
Been meaning to pop over and watch these videos for a while now, but haven’t found the time! Loving the hands, need to get these onto my ‘to try’ list 😅 thank you Steve, see you in the group 🤗
Can you put resin with pigment over the hands ?? And then can it go outside
Add water to the powder. Some casting material can be waterery but dries hard in 30 minutes.
What did you use for the rubber mould? What materials are they?
These r cool 😎 af!!!
Can i ask you something pls if i may. Why my plaster after it cures its like and leaving on hands poweder feel and white dust? Doi do something wrong? Thank you xx 🇨🇾🦋✅💜👑🌈🌻
Which plaster are you using? It sounds to me as if you are not adding quite enough water and perhaps not mixing it fully. Hope that helps
@@SteveMcDonaldCrafting hi there and thank you. You are right i poured some water then the plaster it had warming and gettin hard then pour second portion etc 🌻🌻🇨🇾🇨🇾🇨🇾🦋
How long do you wait to paint the plaster?
Pva glue coat will spoil when apply acrylic paint mixed with water..
Try the chameleon powder
❤️❤️❤️