Man some of these consoles made me RAGE 😂 and it only gets better… make sure to tune in every Wednesday and Friday for the rest of The Texas Load 2 episodes!
4:57 This is known as the false overheating issue which is specific to Corona and Winchester motherboards where a group of 6, 0 ohm resistors fails and makes the console think it is overheating as soon as it is turned on which is impossible. They are part of the temperature sensor circuitry and can be replaced or bridge the solder joints where a resistor was and the console will work normally again.
@@luke9511 you can bridge the contacts where a resistor was. They are just 0 ohm resistors as mentioned and serve no purpose but to close the temperature sensor circuit. It won't cause any damage.
@@vinyminotaur2694 0 ohm resistors are commonly used as fuses when manufacturers cheap out, either replace or swap with actual fuses rated just over the peak wattage expected on the circuit.
@@vinyminotaur2694 No, no please don't do that. 0 ohm resistors are used as fuses. The weakest link in case something goes wrong. If they served no purpose they wouldn't be there
Fun fact about the Metro dashboard, you can kind of tell which version it is depending on how much shading there is, like the first dashboard we see in this video is darker than the final metro dashboard, if the background is light but the selected green box is shaded on the xbox mini menu (when you press the xbox button in the middle) you have a dashboard most likely from 2013 Also judging from that Wii menu version at 18:27 That Wii must have no been played since 2007 or 2008 because for one, the SD Card menu is missing, and two, the Wii Shop Channel icon looks different from the final
I think that was edited in I don't think he actually hit his head on the wall or else he would have a bad headache or his head would of been bleeding a bit
That slim that had high fan spin immediately can be easily fixed. There is a bank of 0 ohm resistors and a resistor has failed literally bridging the resistor will fix it
Yeah i have noticed that too. i think its because the ps3 is so quick and easy to reset. the xbox you gotta enter the serial number and Wiis got the parental locks
I'm going to theorize that PS3's are reset more often because the PS3 was often used to store photos and videos. I'll let you fill in the blanks there.
Can't wait for Jacob to turn on a console and the avatar has a message saying "if you're reading this then you've found my secret toilet xbox" or something else unhinged like that
Yooo been a big fan since 2019, I remember that game Slender the arrival, it's the second ever slenderman game and takes place after the first one if you're wondering. Slender the arrival was made around 2013 I think. Love your videos dude.
The quick RROD on the slim was a resistor that was broken, as the thermal stage for the flashing red dot would be normal if it overheated in 12 seconds or so.
For the second 360 the "xenon" motherboard, it is actually considered as an elpis motherboard now as it was fixed in 09. What makes it an elpis is the gpu, as the board is technically a xenon board and essentially the same other than the gpu which is replaced from the Y1 on the xenons to the Elpis gpu, hence the name.
When it comes to the NES and SNES minis. I think it is a matter of few look in on knowing it can do those save states. This does not discount that it is true that many that bought one of them found they are not as interested in it as they thought they would be, something even more true for ones that would be given up to a Goodwill.
It's a little thing "gat bobblehead" Avatar item is from a game called saints row 3 I used to have it on my avatar LOL don't know why also to be honest I still play my Xbox 360 daily r.i.p marketplace
i know this would probably only be interesting to a few people, but you should show the system version on the wiis, because that last wii was definitely not the latest version. could also date the console, as if it's not latest (4.3) it might not have been played (or have played games released) past 2010.
The System Management Controller (SMC) tracks the eDRAM thermal diode readings from the ANA/HANA. Should the eDRAM's temperature surpass the Trip Temperature set in the SMC Configuration, the SMC will initiate EC_THERMAL mode, and a 0013 error code will appear on the front panel.
Eh...every console I've had and gotten rid of for whatever reason I've made sure to factory reset before I do anything, and your vids show exactly why (not being snarky). I wouldn't want someone taking the console and having access to my account.
I Take Very Good Care Of My Xbox 360 Slim Has Some Minor Damage But Only From Leaning Against The Chair Stool Got Mine From A Car Crash Settlement Back In 2012 When I Was 5
Just wondering if you need the same power supply that corresponds with the motherboard? Or are they all universal? Like does an early power supply work with a late model motherboard?
I have a console from a month after launch that seems untouched it still works and still blows out hot air. No signs of tampering. maybe microsoft fixed it at some point but there is no service date on it. but there is a 2011 dashboard it is an NXE Kinect hybrid. so its kind awkward as the OG warranty seal is still there untouched. the warranty seal was never replaced with the newer one. and the console is also very clean. weird huh?
i have a question and i dont know whats the best place to contact you about it but this is the only place i can think of but i have a xbox 360 i refurbished and it has the blades dashboard with an hdmi port how much do you think its worth?
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Man some of these consoles made me RAGE 😂 and it only gets better… make sure to tune in every Wednesday and Friday for the rest of The Texas Load 2 episodes!
i will!
Better not be click baiting us bro.
Jacob i have a jailbroken PS4.
👌
@@Niko_BellicfromLibertyCity nice
This Xbox was underneath the toilet… cool - Jacob R
I always keep my Xbox under the toilet!!
Where it belongs (airhorns)
@@gregchandler900same who doesn’t
🤣@@RenegadePandaZ
Him: give me free game
Wii: turns into a cicada
I put Mario party 9 into my Wii and it did the same thing
The last wii is probably a pre-2008 wii considering the WSC banner is old
The Last Wii was created in 2010 I think
@@BoneyOfficialooolast as in the last shown on video, not literally the last wii
@@MCWiirdo ohhhhhhh
4:57
This is known as the false overheating issue which is specific to Corona and Winchester motherboards where a group of 6, 0 ohm resistors fails and makes the console think it is overheating as soon as it is turned on which is impossible. They are part of the temperature sensor circuitry and can be replaced or bridge the solder joints where a resistor was and the console will work normally again.
never ever bridge the points it may not cause damage at the time but it will later, ALWAYS replace the part
@@luke9511 you can bridge the contacts where a resistor was. They are just 0 ohm resistors as mentioned and serve no purpose but to close the temperature sensor circuit. It won't cause any damage.
@@vinyminotaur2694 0 ohm resistors are commonly used as fuses when manufacturers cheap out, either replace or swap with actual fuses rated just over the peak wattage expected on the circuit.
@@vinyminotaur2694 No, no please don't do that. 0 ohm resistors are used as fuses. The weakest link in case something goes wrong. If they served no purpose they wouldn't be there
@@jsteezy80 Josh Davidson himself said that you can just bridge the points just fine
Fun fact about the Metro dashboard, you can kind of tell which version it is depending on how much shading there is, like the first dashboard we see in this video is darker than the final metro dashboard, if the background is light but the selected green box is shaded on the xbox mini menu (when you press the xbox button in the middle) you have a dashboard most likely from 2013
Also judging from that Wii menu version at 18:27 That Wii must have no been played since 2007 or 2008 because for one, the SD Card menu is missing, and two, the Wii Shop Channel icon looks different from the final
Love these videos Jacob been a big fan for ages
Let’s go
@jrob0021 same wish I could bid on PvZ on whatnot but it's too expensive to ship to UK rip
Him: *turns on the Wii*
The Wii: *bug sounds*
5:00 that's an easy fix if you know how to solder, you just need to replace the six resistors near the CPU.
I was surprised that the second Xbox worked seeing how beat up it was.
Was not expecting that ending
Me Neither LOL
Dude broke the wall
I think that was edited in I don't think he actually hit his head on the wall or else he would have a bad headache or his head would of been bleeding a bit
looked like one of those stickers that look like a hole.
THATS MY XBOX
Prove it 😂
Very cool
nuh uh
Proof?
X to doubt
I love your content. It's really chill
13:24
thats blur. Awesome Arcade Racing Game with Power Ups and stuff.
I don’t think that’s how you’re supposed to break the fourth wall.
The hole n the wall killed me 😭😭😭😭
Something that has caught my attention, is that you never check the mii parade.
17:51 a Wii that still has Internet Channel as a Trial Version… that’s rare.
when jacob r uploads its a good day
Lmaooo I really thought you were gonna make the strike!
This is your niche. Good job!! Holy views!!
I need some more videos!!!! Love your content Bro, I find your videos so interesting. Is it time for another one yet? Lmfao😂
Joey and Bald-e-locks is 100% a Expeditionary Force reference
11:14 I was not expecting to see ATLA
Jacob is the master of Xbox passcode cracking
5:00 this is a temp sensor issue. common problem. it can be fixed by switching out some broken resistors.
Gat bobble head is from Saints Row. Johnny Gat is a character from that series.
W
@@P5Kapalott Peak pfp
Hi! Love ur content keep it up!
18:56 it’s got the old version of Wii Shop Channel!
That slim that had high fan spin immediately can be easily fixed. There is a bank of 0 ohm resistors and a resistor has failed literally bridging the resistor will fix it
Yeah i have noticed that too. i think its because the ps3 is so quick and easy to reset. the xbox you gotta enter the serial number and Wiis got the parental locks
4:55 i have an xbox that has rgh, on freestyle launcher, you can change the speed of the fan. that may have happened with that one.
The overheating RAM error code is often just 0 ohm resistors that went bad, you can remove them and bridge the pads and you’re off to the races.
4:52 its the red ring of death i think its called
Him: turns on the xbox
The xbox: 🥵🔥🥵🔥🥵🔥🥵🔥🥵🔥🥵🔥🥵
"Is DKOldies a scam? No."
It's just metro v1. It's the first version that came out before the current one came out
I'm going to theorize that PS3's are reset more often because the PS3 was often used to store photos and videos.
I'll let you fill in the blanks there.
Can't wait for Jacob to turn on a console and the avatar has a message saying "if you're reading this then you've found my secret toilet xbox" or something else unhinged like that
Yooo been a big fan since 2019, I remember that game Slender the arrival, it's the second ever slenderman game and takes place after the first one if you're wondering. Slender the arrival was made around 2013 I think. Love your videos dude.
Four seasons, no sound o'death.
The quick RROD on the slim was a resistor that was broken, as the thermal stage for the flashing red dot would be normal if it overheated in 12 seconds or so.
4:51
My Xbox did the exact same thing. I fixed it by removing and soldering back the R4D3 resistors
Gat Bobble head or whatever is Johnny Gat from the Saints Row games I'm pretty sure
For the second 360 the "xenon" motherboard, it is actually considered as an elpis motherboard now as it was fixed in 09. What makes it an elpis is the gpu, as the board is technically a xenon board and essentially the same other than the gpu which is replaced from the Y1 on the xenons to the Elpis gpu, hence the name.
13:24 Beats? Nah, that's the Blur logo. Blur was an awesome arcade racer. Check it out if you haven't.
The Texas Load I love that intro
I read that thumbnail in Joey’s voice lmao
the profile with the website at 14:02 is disney's toontown, not sure why they linked it...
When it comes to the NES and SNES minis. I think it is a matter of few look in on knowing it can do those save states. This does not discount that it is true that many that bought one of them found they are not as interested in it as they thought they would be, something even more true for ones that would be given up to a Goodwill.
It's a little thing "gat bobblehead" Avatar item is from a game called saints row 3 I used to have it on my avatar LOL don't know why also to be honest I still play my Xbox 360 daily r.i.p marketplace
EEEEEEEEE!! now that jam is stuck in my head 😂😂
What is "the texas load"?
the GAT bobble head was from one of the saints row games he’s one of the main characters
You won't find one of my old consoles because I still own them all.
i know this would probably only be interesting to a few people, but you should show the system version on the wiis, because that last wii was definitely not the latest version. could also date the console, as if it's not latest (4.3) it might not have been played (or have played games released) past 2010.
The System Management Controller (SMC) tracks the eDRAM thermal diode readings from the ANA/HANA. Should the eDRAM's temperature surpass the Trip Temperature set in the SMC Configuration, the SMC will initiate EC_THERMAL mode, and a 0013 error code will appear on the front panel.
The Johnny got Bobblehead Is from Saints Row the Third
i just barely saw the yellow hole. you gotta look closer, but it’s visible 👍 5:37
Gat bobblehead -> Johnny Gat from saints row.
Under 1 hour gang
👇
Yeah
me
@@KoopaNutz5000 who is beggar??
@@KoopaNutz5000 also i just wanted to see how many people reply before that 1 hour
THATS MY TRIAL VERSION OF SLENDER THE ARIVAL
🤨
THATS MY MATTE BLACK XBOX!!!!
Omg my Wii is in the video don’t worry I have another
8:30 he indeed does work at DKOldies 😂😂
7:40 sUpeR MaRio GalAxY
10:22 lol how dare those ps3 owners responsibly factory reset their ps3s before selling em
Ikr
Gat is a character from saints row.
Happens so much try selling on local market places people mess you about people can't be dealing with that and just give it away
That GAT is from Saint's Row and it's an unlockable avatar reward lol.
Real mfs remember the Red Dead redemption Avatar outfits
I GOT YOUR TEXAS LOAD DOWN HERE
I wonder do people ever come across their console in your videos that would be cool lol.
I bought a toilet and found out that it also takes Wii’s
Eh...every console I've had and gotten rid of for whatever reason I've made sure to factory reset before I do anything, and your vids show exactly why (not being snarky). I wouldn't want someone taking the console and having access to my account.
I Take Very Good Care Of My Xbox 360 Slim Has Some Minor Damage But Only From Leaning Against The Chair Stool Got Mine From A Car Crash Settlement Back In 2012 When I Was 5
Summer break for you? Not a chance.
THATS MY GTA V SAVE FILE FOR XBOX 360😮
19:44 bro got mad
I need a dkoldies follow up.
The first Xbox got a NCC logo near the power socket.
Is that from Taiwan,ROC?😮
"Why is your dad a fictional character?" 🗣️🔥
Because he works from 05:00 to 22:00 and you never seen him, but you got to go to college thanks to him!
That website leads you to the disney store lol
Check out more old 360's Jacob R! your videos got me into buying and fixing old 360's. i want to find a console with the blades dashboard too man!
How’s ya head bro 😂
I have a video suggestion: trying PAL games on an NTSC tv what happens?
You forgot to check for Miis. :)
Just wondering if you need the same power supply that corresponds with the motherboard? Or are they all universal? Like does an early power supply work with a late model motherboard?
20:03
maybe the data breach of sony made their users a little more cautious giving away stuff with personal details on it
I have a console from a month after launch that seems untouched it still works and still blows out hot air. No signs of tampering. maybe microsoft fixed it at some point but there is no service date on it. but there is a 2011 dashboard it is an NXE Kinect hybrid. so its kind awkward as the OG warranty seal is still there untouched. the warranty seal was never replaced with the newer one. and the console is also very clean. weird huh?
I bet Thay love this guy
I’m going to to spend a $1000 dollars
Funny you got mario kart when you had a open mario kart case next to the console?
The hole in the wall lmao
These videos are peak
Gat bobble head? I’m pretty sure that’s from the saints row games
Is this from DK oldies.
Yo w videos
i have a question and i dont know whats the best place to contact you about it but this is the only place i can think of but i have a xbox 360 i refurbished and it has the blades dashboard with an hdmi port how much do you think its worth?
i wonder what bro will do when he cant find anymore of these in goodwill 🤔 maybe the people who buy them from him will give them to good will