Connect as per the description and video provided but servo motor automatically rotates with out any sensor detection . Can u help me what could be the error . I uploaded the code as well which is provided in descritption
hey , bro i did every thing right but the code have a problem when the ultra sonic don't see anything the motor servo work but when it see something It stops so yea can you help me I have a school project after 2 days so please response fast
hello, i'm new in this kind of technology. and i'm confused to why ours isn't working. we've followed all your steps but, it's not working. i mean, it is but, sometimes it won't 😓😓 please help. D:
Sir i did everything, but it it not working, when i connect my ur sensor, the motorr stops to work on the upward position, after i remove ur, it is moving up and down continuously. Pls help
Hi, I did whatever you showed in the tutorial. However I noticed that in my model the servo motor barrier is not moving either up or down. as soon as I connect the circuit it to the laptop it is moving upwards but is stopping over there. Pls guide me.
hey bro i did as you shown in the video i inserted the code but it is doing nothing please reach out to me i have to do this for school project it is in 3 days pls
i tried to upload the code but got this message The project uses 4124 bytes (12%) of storage memory. The maximum size of the program is 32256 bytes Global variables use 241 bytes (11%) of RAM, leaving 1807 bytes for local variables. Maximum size 2048 bytes. avrdude: ser_open(): can't open device "\\.\COM3": The system cannot find the file specified. what can i do?
Join telegram group for any doubt. Link in description.
Me puedes regalar el código
It's in description
Sorry but where is the code
@Kid04414 it's in description
Bhai code
thank you very much i made it thanks
Sir will it work after applying the code if we detach the cable from laptop will it work and also give the product links
Yes it will work and product link in description.
I have a issue in servo motor its not rotating 90 degree its rotating many times.... Continuously.... Can u solve the problem plz
join telegram group
Hi I am your big fan ❤❤❤❤❤❤❤❤❤❤❤❤❤❤😊
Thanks for your support and please subscribe to keep supporting.
Bro can we do two working tolls with two breadboards, two ultrasonic sensors, two servo motors but one Aurdino
Yes
Hello, can we make it become parallel circuit? How many maximum circuit? So we need servo motor and cencor in every toll/parking gate?
What to make parallel?
Sir dono taraf se get open karne ka system kaise lagaye
Not made yet
Can you please say this video this thing only works with battery
It can work with laptop with stable power supply also.
Is it will work without laptop work or computer work
?
Sir dono taraf se get open karne ke liya kya kare
Ye coding ka name kya hai.... Aur kaise seekh sakte hai????
It's basically based on C language and arduino have it's own libraries so you just have to type on RUclips "arduino programming".
Can we work it without laptop
can we use mg 995 servo ????
pls answer fast
Yes you can.
ardeion ko hamesh laptop se connect karna parta hai kya
please reply about this sir it very necessary tomarrow is the last date to submit the project
bro i have a poblem with tae code pleae help me
Tell you problem on instagram
can you give some tips its my project
I have a issue in servo motor its not rotating 90 degree its rotating 30 degrees.... please help
Try to increase the angle
From the code
@@SimpleCircuitsOfficial which part please it's due in 5 hours
@lin-jx6zq where some angels are written go through the code and check.
hi, do u have a flowchart and diagram block? it's for my school project, i appreciate if you would help, thankuu 🤩🤩
Join telegram group I will provide it there. Link in description.
@@SimpleCircuitsOfficialI have no telegram plz tell solution for it
ardunio board electricity kaha se leta hai sir
Connect as per the description and video provided but servo motor automatically rotates with out any sensor detection . Can u help me what could be the error . I uploaded the code as well which is provided in descritption
Make all the connections stable and provide stable power supply.
same problem with me
still not working
@@SimpleCircuitsOfficial please help
Do the same
Hi sir my servo motor is not rotating wt is the issue can u explain plz
Join telegram group I will solve this problem.
Is wire ko kya bolte h
Jumper wires
Is code is working properly? Without any error
Yes
@manahiljamil6034 Did you try it ? Did it work without eror ?
@@PsYra8 yes
hello what s the name of the app to downloade the program
Arduino ide
Bro i need a help. The code is not working
Join telegram group. I will help you there. Link in description.
Hlo sir after uploading code if we detach with computer does it work
Yes
Bro in which app we should need to insert this code
Arduino ide
is your code working or not please tell i have a school project tommorrow fast
Working good
plz tell me code i wnt to copy it plzz tell me
It's in description.
Arduino Uno r3 par hoga na
Yes
hey , bro i did every thing right but the code have a problem when the ultra sonic don't see anything the motor servo work but when it see something It stops so yea can you help me I have a school project after 2 days so please response fast
Contact me after 10hrs
@@SimpleCircuitsOfficialI tried thecode and the ultrasonic sensor doesn’t work and does not detect but servo motor is work , can u help me please
Join telegram group I will solve this problem
Is the code is working ...sir do you removed the errorr..can we run this sir
No error in code.
@@SimpleCircuitsOfficial my code cant working, i need solution
Bro you have use tht Arduino Uno and link is for and uno..now will the same code of your work in and too?
Yes
Its work?
Definitely
My Servo Motor is not going Down again Please Help!
Use stable supply or remove hand after passing car.
But ise kese pta chalega payment ho hui ya nhi
This is basic version of what you're expecting. I will make that in future.
Can we give power to aurduiino from laptop cable to direct electricity
You can give power to arduino from laptop.
Can I get arduino uno board offline in my town
Yes
hello, i'm new in this kind of technology. and i'm confused to why ours isn't working. we've followed all your steps but, it's not working. i mean, it is but, sometimes it won't 😓😓 please help. D:
Join telegram group I will solve this problem.
hi, i did every thing right but the error : avrdude: stk500_recv(): programmer is not responding . is poping can you help me ?
Reset arduino
Hlo bro can u send me a link of documentation pdf
I don't have such
Can you please send this thing work with battery 3:
What battery 3??
The software in which we should program is not appearing
It's name is arduino ide
Hey where to make the code i need the answer now and
Sir i did everything, but it it not working, when i connect my ur sensor, the motorr stops to work on the upward position, after i remove ur, it is moving up and down continuously. Pls help
Check the ultrasonic sensor wiring with the arduino and for more you can join telegram group for more live discussion.
Hi, I did whatever you showed in the tutorial. However I noticed that in my model the servo motor barrier is not moving either up or down. as soon as I connect the circuit it to the laptop it is moving upwards but is stopping over there. Pls guide me.
Use stable power supply.
you got the wrong one you got the one that spins foever okay
Stable powersupply
can we use normal wires instead of jumper?
Yes, you can use.
Bro can u plz send me the documentation pdf link
I don't have such
Awesome 👌🏻
Can u give me the link of arduino uno please
It's in description
The code site is not opening can you send to me
when connect it the app s is not appearing
??
Which coding language is this
C and cpp
Can someone tell me all the materials involved?
Check in description.
Nice Oppenheimer wallpaper
Thank you, I am big fan of him. The movie was amazing by Christopher nolan and music is just💥💥💥💥💥.
Me pueden pasar el codigo es para mi proyecto de la escuela
What is name of this website
Which website you are talking about?
hey bro i did as you shown in the video i inserted the code but it is doing nothing please reach out to me i have to do this for school project it is in 3 days pls
Sir can you provide this projects ppt 🙏 please
kok saya harus di upload baru servo motor nya berfungsi
hello bro your code will not working give an error on screen
May be you haven't install the library.
From where can i get this code?
Link in description.
where is the link?
Ứng dụng hay quá bạn ơi
Cám ơn bạn tôi
Report pdf chahiye thi project ki
I don't have such report for this project.
Okk
Jumper wires link
It's in description
Funktioniert es auch mit Mblock? Weil wir müssen in der Schule mit Mblock programmieren.
I haven't tried that.
Bro help me im getting error while uploading the code
Join telegram group. I will help you there.
Can you send the code 🥺🥺🙏🙏
It's in description
Sir code me bahot error a rahe hai
I will solve this tomorrow morning.
Good 👍
Can u aploud the code
It's in description
Uno code ta ktai pabo
?
i tried to upload the code but got this message
The project uses 4124 bytes (12%) of storage memory. The maximum size of the program is 32256 bytes
Global variables use 241 bytes (11%) of RAM, leaving 1807 bytes for local variables. Maximum size 2048 bytes.
avrdude: ser_open(): can't open device "\\.\COM3": The system cannot find the file specified.
what can i do?
1. Disconnect all wires from arduino then reset the arduino and re-upload the code.
2. Or try to change the port from tools.
even i made as per the video it is not working, i dont know how to solve it, can you help me?
Join telegram group I will solve this.
My code is not uploading error return code is not 0
Join telegram group and show
Bro that excitement is not working
!!!
you need to install the by using money can you find a to get it free
Has anyone tried ?does It work I want to make it!
I have tried it's working good.
@KrishnaSharma-ji4og my code is not getting upload ...there is an error please tell
@@RahulGupta-uv1bhwhat's the problem
Hey pls tell mi connection properly@@KrishnaSharma-ji4og
Can you help me pls@@KrishnaSharma-ji4og
Hello bang please ask for the coding code
Code is in description
I need code
It's in description
สวัสดีครับครูจุก
?
Not working bro why happened please tell me bro
Join telegram group I will solve this problem.
Me pueden pasar el codigo
How to get code
It's in description
Where is a code
It's in description
Code pls
It's in description
tidak bisa saya bingung
Program
In description
send code broo
It's in description
Kuya hindi po siya gumagana
?
❤
İ have a codd
👏
🤩 P R O M O S M
Thamku
The code is full of errors
Join telegram I will solve it there
Hello can u give here i dont use telegram please @@SimpleCircuitsOfficial
RBT GAMING
Sir dono taraf se get open karne ke liya kya kare
I want code
See in description
RBT GAMING
GAMING GAMING