Arduino Smart Parking System
HTML-код
- Опубликовано: 5 окт 2024
- Hello friends and welcome to my RUclips channel.
In this Video, I made made a Arduino Smart Parking System.
The components I used are as follows:
1. Arduino Uno
2. LCD Module With I2C Interface
3. IR Proximity Sensor x 2
4. Servo Motor
5. Male To Male/Female Jumper Wires
6. Small Adhesive Breadboard
Buying Link of the above components:
Arduino: shop.witblox.c...)
LCD Module With I2C Interface: shop.witblox.c...
IR Sensor: makerbazar.in/...
Servo Motor: makerbazar.in/...
Small Breadboard: makerbazar.in/...
Jumper wires you can search it on Amazon, Witblox or makerbazar
So, Now the code links are as follows:
For I2C address scanning code
drive.google.c...
Our main code for the parking system
drive.google.c...
Circuit Diagram of the project:
drive.google.c...
To get the instant notification of my videos, do subscribe my RUclips channel and press the bell icon and select the notification to all.
If you want to learn forming different shapes from the snake puzzle, I have created a playlist where you can learn the popular shapes of snake puzzle.
.
.
.
Do subscribe my RUclips channel
Do give it a 👍
Do share it to all.
Thank you for doing the above.👆👆👆👆👆
![[IN HINDI] Arduino Car Parking System](http://i.ytimg.com/vi/wae7bxT5Yec/mqdefault.jpg)
![[IN HINDI] Arduino Car Parking System](/img/tr.png)
hi bro
you know you are a genius. i see ur all video and my one of the favoruite video is this.
i hope u post many video like this.
and Great job.😍👍
Bro very thankful to you I had subscribed you I extremely needed this project for my school😊
Create a car parking space simulator with light sensors that detect the presence of a car A display that indicates whether the parking space is free or occupied (indicate which ones are free) Two photocells for opening and closing the barrier
Congratulations Inspiration for me to start Arduino Projects 😢 thanks
Welcome bro
Very nice, keep it up
Do more vedio 😊
Great Job ..., Amazing
this message show when i run scanner
(Scanning...
No I2C devices found)
and your is show five sentence but mine is endless sentence
Is your Lcd display comes with an I2C module??
& have you downloaded the LiquidCrystal_12C Library??
Code error' bro please give me the correct code
Bro please send me the code it's urgent
@@bavesh-mr7gs gimme your mail. I have this project
did u find the correct code? pls send
@@sahidulislam602.can you please send it to me too
can you help me?@@sahidulislam602.
Would you go into detail the lines of code for the LCD display?
I have the traditional LCD display which has multiple pins, and another one with 4 pins just like yours.
I’d like to learn about these 4 pins, what they are, and how to program it compared to the multiple pin one
You can check the website of "last minute engineers" where they have given a in depth info about the i2c LCD
@@avcuberandinventorofficial thx
good job, I like It, Please would help me replacing the IR1 by an RFID ? how can I do it?
By watching my latest video
Aree the boys bhi aagya webseries ka ad 😂❤
Very nice keep shining 😊
is it possible to make a payment method like nfc ? can i add an nfd card and programme it to open only when we he pays .plz respond i need it for a school project . fantastic btw
Yes, you can
@@avcuberandinventorofficial how to do it can u help me plz give me a brief the materails i need to buy and how to integrate it with the other project and the code ?ty again apperciate it man
@@alfykerolous1869 Ok, so you'll need a RFID Card And a RFID Tag, then you have to remove the IR sensors as becuz the gate will open only after the payment, and instead of IR sensor part code you have inculcate the working code of RFID Card And RFID Tag code in it 😉
@alfy kerolous BTW, I'm working on kinda same project in which I'm using RFID Card & Tag both, but that video will be posted by next month. So please subscribe my channel to be notified
Bro please provide code it is showing that file got corrupted
did u get the code?
@@simar6409 no bro he is not responding
Good Job bro
Do u have block diagram for tis
hi bro can you tell how many jumper wires did you take
Display is not working
I uploaded the code
But it shows blank
Pls help😢😭😭😭
I have project showcasing in 5days
@JDMZeroX 1.please check the brightness of LCD i2c by a screw driver.
2. Check the jumper wires
3. Try it with another i2c Module
Can I use esp32 instead of Arduino uno?
Yes, you can
Did you do simulation for this project? If so can you please provide that circuit diagram?
Provided in the description, you can check it out....
Thanks for concern
@@avcuberandinventorofficial I am asking about proteus simulation. If you have can you plss provide the link
Very nice
Thanks
I really need help, the servo motor works by itself and keeps going up and down ignoring the sensors
May be the sensor's range is at max, please confirm
hello, i am using the e18-d80nk IR proximity sensor, what will be different in the code? amazing work by the way
I suggest you to use arduino mega as the microcontroller. There will be certain changes in the code, which I need to figure out once you provide me the component list with model no that you are using. (Personally, sorry for the late response)
@@avcuberandinventorofficial how can i program my esp01 to display the. data on the lcd to Blynk?
How much?
Broo it's showing I2C address but afters uploading it is not showing on LCD display small boxes are coming...!
Reduce its brightness by using a screw driver. Everything will be visible after that
Sir, can we use Ardunio Mega instead of Arduino Uno???
Of course
Bro can we use Esp8266 board plz Reply
Yes, you can
@@avcuberandinventorofficial can you plz guide me
@@techstudent1038
You just have to do some modification in the code ( Pin's Section)
@@avcuberandinventorofficial okay Thank you so much ❣️
هلو كيف يمكنني اضافه حساس يقوم بتسجيل الوقت والتاريخ عندما تقف السياره في مكان معين داخل الكراج
Hey, how can I add a sensor that records the time and date when the car stops at a specific location inside the garage?
If you want to record the time and date, you just need to make several changes in the code that I have given.
If you want to track the location. You can make a radar system as well using ultrasonic sensors
did you select the board and connect port for i2c scanning code ?
Yes, I did
Hi may i ask a question? What did you use to supply power to the arduino?
@@GALANGJuvertD A power bank
@@avcuberandinventorofficial I want to add another servo motor. Where should I insert it on the Arduino and also on the mini breadboard?
@@GALANGJuvertD On the mini board
@@avcuberandinventorofficial hi I have a question about where I attach the second servo motor on the mini board since on your video the pin holes were already full
❤
Nice video buddy
Hi sir instead of lcd module can we use anythingg
Yes, but it requires a few changes in the code
@@avcuberandinventorofficial sir we are planning on creating the same but with blynk app and esp8266 wifi module and sensors for each parking slots .could u plz guide us?
Hello I am using the esp32…what will be different in the code?
Pin points and board specification
i have problem from the code when it running my ir2 cannot detect the car
Try to increase the range through a screw driver
what are the total expenses of this project?
30-35 dollars
Output not display on lcd module ??
Check the brightness
Nice video
Thanks
Bro its showing no i2c device found
SirI have done all the same thing in my project but lcd is not displaying anything how to solve this can you help us
Have you tried to turn it on through a screw driver??
Is your LCD comes with I2c Module??
Have you downloaded the required libraries???
@@avcuberandinventorofficial I have not tried with screw driver I don't know how to do ,but we have I2c module with lcd I have downloaded sir required libraries
did it work? @@sravyanamburu
@@simar6409 yes it's working thank you
@@sravyanamburu did the screw driver thing help or did u try something else? urgent pleaseeee
Hi sir where is the code?
I want this Arduino coding. But when I go into the drive link, it says it's empty. Can't you share Arduino coding?
There's a problem with the link. Please try opening it after 24 hours
Check it, I have corrected it
If I connect to the breadboard it's not working if I give direct connection its working
how? can you please send me the code bro?
what software did you use to simulate?
Microcontroller: Arduino
Software: ArduinoIDE
@@avcuberandinventorofficial okay thank you
what version of arduino ide did you use in this video because when i write it it show error about
That means you haven't downloaded the LiquidCrystal_12C library
can you tell me how can i download it ?@@avcuberandinventorofficial
the screen is not printing can someone help
Check the connection. If not, then try to decrease the resolution by a screw driver
No i2c devices found.what to do bhaiya?
Do connecting properly
hlo which library file did you install for liquidcrystal
The latest one with version 1.1.2
Which programmer we should select in tools section for ARDUINO UNO
You can prefer the latest one.....
Well, I used AVRISP mkll
Type of jumper wire?
Given in the description
@@avcuberandinventorofficial male to male wires hai ya female to female hai?
Or kitne total vo chaiye?
I have used both
About 20 JW
@@avcuberandinventorofficial ok, thanx
Hey a help I complied your codes but iam getting errors can you please help me with it
Will you please specify the problem or in which line you are facing that
hi can you give the code? i have open the link but the folder is empty. TQ
There's a problem with the link. Please retry it after 24 hours
Check it, I have corrected it...
Is it required the scanner above in the code?
Yesss
What's the coding website ur using??
It's an application I.e. ArduinoIDE
Hi bro serial monitor was not working
What can I do
Update the ArduinoIDE
No i2c device find on my code, why?
May the circuit not be connected well or just try to rotate the switch in a clockwise direction with the help of a screw driver
Use the 12c Scanner Code as well
@@avcuberandinventorofficial should we include scanner code in the main code ? or else what to do?
I got it but getting error as no such liquidCrystal directory file what to do?
@mounicakancheti1392 Scanner code should separated from the main code as we are using it only to get UID
Lens kart ka ad aagaya 😂
Connection is proper but LCD display is not showing
Turn on it with the help of screw driver
@@avcuberandinventorofficial
Only the boxes are seen but not the display
It means you have turned it a lot. Just turn it anti-clockwise a bit, it will surely give you a clear view
Thank you it is little visible now
Turn it a little more, it will be properly visible
Bruhh I really need the codeee please do send itttt please it's an emergency
Please check it again.
Code is not there in the link
Check, I have re-uploaded ittt....
Eror in liquid crystal l2?why
In the code or in display???
@@avcuberandinventorofficial in the code bro
Write (16,2)
@@avcuberandinventorofficial ok bro thanks ❤️🙏🏻
Lcd is not displaying
Change the contrast using potential meter. Thanks
Heyy how can I get the password to open the code ?
There's no password to open the code
Lcd is not displaying the info
May be becuz connection is not correct.
Have you entered the I2C address of your LCD?????
@@avcuberandinventorofficial yes I have entered i2c address
Ok then in Liquid Crystal I2C enter (16,2)
@@avcuberandinventorofficial I have entered
@@avcuberandinventorofficial but it was not working
what power source did you use?
A powerbank
Send me code
The code is already given
Check the description
@@avcuberandinventorofficialsir the code isn't there please do share ittt please
@BariraBegum-yw2sy I have updated it. Please check and confirm
@@BariraBegum-yw2sy I have updated it. Please check and confirm
❤
❤