Hello there, where should we put the wires of the capacitive proximity sensor and inductive proximity sensor? The object passes through both an inductive sensor and a capacitive sensor, and it will detect plastic only.
hello, can i use arduino uno r3 board for that? did u use DC female adapter cables and 12V DC power supply adapter where the wire of the inductive is connected?
Have same project but use capacitive proximity sensor. It said it needs 24 volts for it to sense plastic. If i connect it to arduino, is it possible to burn the Arduino? So i should use resistor about 100 ohms since sensor capacity is 300mA
You can use this wiring connection its safe because 24v to supply is only for Sensor but you can not supply 24v to Arduino just use separate power supply or dc to dc step down converter for Arduino
is the sensor compatible with Raspberry pi 4? Also it's challenging for me to differentiate inductive and capacitive proximity sensors. can you advice, please? I want to detect metallic and plastic objects for my project.
@@passiontechklm thank you I think I have both inductive and capacitive but when i try to use them it seem that both are inductive. LJ12A3-4-Z/BY and LJC18A3-B-Z/BX.
Can I ask what type of power supply can I use to supply the power in capacitive proximity sensor that have a 6-36 VDC, can I use charger like charger of laptop or other charger that has a 12 V
You don't need anything components,you just need 12VDC 2 Amp power supply or use your laptop charger, just make sure to connect positive and negative wire correctly to sensor is fine
how can connect 12V to arduino not burn input, normal used optocoupler keep high volt out of arduino 5 volt pin, and not use resistor limit sensor input current burn input port,
@@passiontechklm ok,thanks i not know thats before i think can only 5V make input, and orden today morning optocoupler module 12-24 volt in and 5V out module to arduino 0,68$/pcs. i build arduino nano board spindle RPM gauge promixity sensor sense spindle chuck tricker and nano show oled display spindle speed my cnc machine.
I tried it and it work. However, i tested it again later just to make sure and the servo motor is not spinning. But when i take off the d5 and d4 pin the servo motor spins a bit. Any solution to this?
Can I ask if I'm going to use Capacitive Proximity Sensor 6-36 DC how can I connect that in Arduino, what battery I need to used for this type of voltage
@@passiontechklmlast questions can you give me a specific example of 12vdc power supply, because I'm new be in electronics and I don't have enough knowledge
It didn't fry the arduino? im confused now, why others use PC817 optocoupler or voltage divider to protect arduino from using this high voltage Proximity sensor?
Hello! I connected the sensor to a 9V battery on the breadboard and it works but the servo keeps twitching and it rotates even if the sensor is not detecting anything.
Maybe your Servo error,to be sure you can try just only Servo first so that you can identify the Servo error or not.otherwire you need to edit the code of Servo singnal pin.
sensor output is directly connected to arduino GFIP pin, it can burn arduino. can you share a practical circuit diagram like with opto coupler etc etc using internal PULLUP resistor ???
Good day sir! I am working on a project wherein I uses capacitive sensor to detect plastic, there is also a servo motor attached. But I have a problem, if I try to detect the plastic using capacitive sensor the servo motor doesn't move but if it doesn't detect anything it just move. Can you please help me with this? Thank you so much in advance
Actually you dont have to change anything from this code.You can direct use it for that project.Just follow Step by step it will no issue. If not just check your wire because some time bad wire can cause unstable signal.
@@ourbunnyjaeminie9745 i not has used capasitive sensor but i think have analog value output and need make code read analog pin and test what value detect different materials and add code this value trick output to do something, code read analog value and serialprint value to arduino serial display first.
@@savagedragon283 As i mention in above the sensor voltage is always important for safety. Second is the sensor need to be 3 wire mean 2 for positive and negative 1 for Signal out put.It will work perfectly
simple need relay run conveyor belt motor, on/off. and code only need digitalwrite, pin number output to relay, high or low, code need only if sensor high write output high,
Can I ask if I'm going to use Capacitive Proximity Sensor 6-36 DC how can I connect that in Arduino, what battery I need to used for this type of voltage
Hello there, where should we put the wires of the capacitive proximity sensor and inductive proximity sensor? The object passes through both an inductive sensor and a capacitive sensor, and it will detect plastic only.
Thank you, I finally found a good explanation, a hug.
Thanks for your support 🙏
Gracias,por fin encontre una buena explicacion,un abrazo.
Thank you so much for this wonderful work! Helps a lot!
You are welcome 🤗
Good work buddy!!!!!But do you have schedule of it?I really need it,hope for your answer!!!!!❤❤❤
@@user-rn7qz6fj4q Thanks bro... means what kinds of schedule?🤗
Can I change the sensor with Infrared Sensor to make it detect plastic bottles while using the same code???
Yes, you can
Hello there, where should we put the wires of the capacitive proximity sensor and inductive proximity sensor? The object passes through both an inductive sensor and a capacitive sensor, and it will detect plastic only.
As long as the same voltage than You can use as the same wiring and link out put together as well
hello, can i use arduino uno r3 board for that?
did u use DC female adapter cables and 12V DC power supply adapter where the wire of the inductive is connected?
Yes
Have same project but use capacitive proximity sensor. It said it needs 24 volts for it to sense plastic. If i connect it to arduino, is it possible to burn the Arduino? So i should use resistor about 100 ohms since sensor capacity is 300mA
You can use this wiring connection its safe because 24v to supply is only for Sensor but you can not supply 24v to Arduino just use separate power supply or dc to dc step down converter for Arduino
you can also use a pepperl and fuchs asf021PD
Thank you❤
hello can i ask how about to connect 2 supply…1 at sensor 1 to jack
is the sensor compatible with Raspberry pi 4? Also it's challenging for me to differentiate inductive and capacitive proximity sensors. can you advice, please? I want to detect metallic and plastic objects for my project.
Yes, this sensor is compatible with both raspberry and Arduino.Inductive is only detect metal and capacitive proximity is for both metal and plastic,
@@passiontechklm thank you I think I have both inductive and capacitive but when i try to use them it seem that both are inductive. LJ12A3-4-Z/BY and LJC18A3-B-Z/BX.
Can I ask what type of power supply can I use to supply the power in capacitive proximity sensor that have a 6-36 VDC, can I use charger like charger of laptop or other charger that has a 12 V
Yes you can use laptop charger or anything between 6-36vdc
@@passiontechklm do I need to use other electronic component to connect the wire of capacitive sensor on the laptop charger or charger
You don't need anything components,you just need 12VDC 2 Amp power supply or use your laptop charger, just make sure to connect positive and negative wire correctly to sensor is fine
@@passiontechklm what type of voltage do I need output or input that need a 12V
how can connect 12V to arduino not burn input, normal used optocoupler keep high volt out of arduino 5 volt pin, and not use resistor limit sensor input current burn input port,
Arduino can be power 5-12vdc via DC jack or Vcc In , it's safe because it's has automatic Requlator in on board.so wouldn't burn it.
@@passiontechklm ok,thanks i not know thats before i think can only 5V make input, and orden today morning optocoupler module 12-24 volt in and 5V out module to arduino 0,68$/pcs. i build arduino nano board spindle RPM gauge promixity sensor sense spindle chuck tricker and nano show oled display spindle speed my cnc machine.
can i directly put 12v dc to dc jack arduino and not using wire connector for proximity sensor?
Yes, you can use directly to DC jack.
@@passiontechklm the arduino won't burn?
@@nujnujkun Arduino can give power via DC jack up to 12vdc,so won't fry it out.
@@passiontechklm is it possible to have capacitive and inductive proximity?
What's the thing you connected to the wire connector called? The one with two red wires?
That is just connetor only you can you any connetor
I tried it and it work. However, i tested it again later just to make sure and the servo motor is not spinning. But when i take off the d5 and d4 pin the servo motor spins a bit. Any solution to this?
This happen when Servo currently is not enough from Arduino output voltage so I suggest you give extra 5vdc to Servo motor it will solve.
@@passiontechklm how do you add voltage to servo? Sorry new to this.
Can you make the same video with how to add voltage to servo motor?
@@ficchi6756 coming soon I will make it
@@passiontechklm Thank you! Can you please do it this week? My project deadline is near😭
Can I ask if I'm going to use Capacitive Proximity Sensor 6-36 DC how can I connect that in Arduino, what battery I need to used for this type of voltage
You can use exactly this method because I am use 6-36vdc inductive proximity sensor so I use 12vdc power supply here
@@passiontechklm thank you for your answer
@@passiontechklmlast questions can you give me a specific example of 12vdc power supply, because I'm new be in electronics and I don't have enough knowledge
Why having this type of connection for proximity sensor
It didn't fry the arduino?
im confused now, why others use PC817 optocoupler or voltage divider to protect arduino from using this high voltage Proximity sensor?
It's safe to use...not fry it up ☺️
@@passiontechklm appa chukka kedayatha???
Can i get delay coding for servo motor after metal is detected from 180° to 0° .
Just edit the delay time inside the code will done.
Hello! I connected the sensor to a 9V battery on the breadboard and it works but the servo keeps twitching and it rotates even if the sensor is not detecting anything.
Maybe your Servo error,to be sure you can try just only Servo first so that you can identify the Servo error or not.otherwire you need to edit the code of Servo singnal pin.
@@passiontechklm What do you mean by editing the code of the servo signal pin? The servo was working normally when I coded it by itself.
set the delay to a higher value, also the sensor might not be able to get the sufficient voltage. check your sensor's specifications
how to change the servo motor if the sensor detects another material other than metal? can i have the code for it?
This sensor can be used by replacing an ultrasonic without changing the code. my project is smart dustbin?
This code can not use for smart dustbin project.Here is Smart dustbin project with code and diagram bro...ruclips.net/video/Hn6w1s2tcno/видео.html
internet have million project ready to use whit code arduino ultrasonic sensor, detect object or measure dimension or many many project have.
sensor output is directly connected to arduino GFIP pin, it can burn arduino. can you share a practical circuit diagram like with opto coupler etc etc using internal PULLUP resistor ???
It's safe .... won't burn Arduino Uno.Becaus it's just transformers the signal only which will make Arduino High or Low
ı dont understand@@passiontechklm
hello what is the red and black wire outside where it is connected ?
That is 12vdc power supply
Is the 12V power supply u use the same as laptop charger?
The same look but different voltage because mostly laptop charger are 19v.
Good day sir! I am working on a project wherein I uses capacitive sensor to detect plastic, there is also a servo motor attached. But I have a problem, if I try to detect the plastic using capacitive sensor the servo motor doesn't move but if it doesn't detect anything it just move. Can you please help me with this? Thank you so much in advance
I'm also trying to detect paper using capacitive proximity sensor. Badly needed your help. Thanksss
Actually you dont have to change anything from this code.You can direct use it for that project.Just follow Step by step it will no issue. If not just check your wire because some time bad wire can cause unstable signal.
@@passiontechklm thank you so much sir!
I'm sorry to ask again sir, have you any idea how to code the capacitive sensor using arduino to detect paper?
@@ourbunnyjaeminie9745 i not has used capasitive sensor but i think have analog value output and need make code read analog pin and test what value detect different materials and add code this value trick output to do something, code read analog value and serialprint value to arduino serial display first.
Why my servo not move when i direct supply to esp32 board?
can i use microsonic sensor instead of proximity sensor? plz reply :)
@@savagedragon283 You must check your sensor voltage either is 12v or not for not to burn out the Sensor .If yes than should be fine.
@@passiontechklm thank you for the information♥️
@@passiontechklm i was also considering tfmini LiDAR is that any good?
@@savagedragon283 As i mention in above the sensor voltage is always important for safety. Second is the sensor need to be 3 wire mean 2 for positive and negative 1 for Signal out put.It will work perfectly
@@passiontechklm thank you soo much for the information ♥️♥️
Hello, what are the tools you use?
Arduino Uno
Inductive proximity sensor
Sg90 servo motor
12VDC power supply for inductive sensor
Some jumper wire
Connectors
@@passiontechklm thank u
hello, is it safe to connect the 12v to arduino or did you use a relay? Thank you
It's safe to use 12VDC to Arduino via DC jact or VCC In ,because it's has built in 5V Requlator.
can i also use LJ12A3-4-Z/BX New Inductive Proximity Sensor
Yes, you can use that one
Is there any code where capacitive sensor only can sense plastic not metal or paper
This is not the code issue you still can apply this code but the sensor, you need to find sensor which only detect plastic.
Can you name that white material used to connect 12 v wire
hi, how about controlling the servomotor with a capacitive proximity sensor which detects plastic materials, are they the same process?
Same concept... you can use this code as well
@@passiontechklm thank you so much
@@passiontechklm another question, is relay module needed to this concept?
@@malitaiti6291 relay module wil be different code
For relay control here is the link....ruclips.net/video/8nuNzZMCXpA/видео.html
Will this burn my pin port in my arduino uno?
is the code compatible with a capacitive proximity sensor?
Yes, you can use this code with capacitive proximity sensor too.
What power supply did you use for capacitive proximity sensor?
I use 12VDC Adaptor
Where i can buy it?
And what kind of 12 volt adopter?
@@nashjavier8312 You can use 12V 2A for this project shp.ee/vmn4hp4
hi but i need to rotate the motor so it turns a conveyor belt what changes di i have to make in the code
You are using servo motor or DC motor.? If DC motor you can't use this code.
@@passiontechklm and will the code change if i am using a capacitive proximity sensor
simple need relay run conveyor belt motor, on/off. and code only need digitalwrite, pin number output to relay, high or low, code need only if sensor high write output high,
@@passiontechklmcan i have contact details I have a project proposal for you.?
Can I use female jack adapter as a substitute for the wire connector?
Yes, you can use that it just connetor only
@@passiontechklm what is the name of white materials you used to connect wire
@@MerianSmith-tq3rk that is just connetor, you can use any type of connector
@@passiontechklm like what?
@@passiontechklm thanks,,,i have a question again, is it ok if we use a 11 voltage battery as a power supply?
how can i calibrate it like the capacitive sensor that can detect plastics or others objects? can you make a step by step video about that?
You can apply this code to detect plastic or other objects but you need to change the sensor which is call capacitive proximity sensor.
@@passiontechklmDo I still need to change something on the code? Or can I just copy and paste it while I use capacitive proximity sensor?
@@kentdagacan4828 no need to change the code ,just copy and paste it ok.
Can I ask if I'm going to use Capacitive Proximity Sensor 6-36 DC how can I connect that in Arduino, what battery I need to used for this type of voltage
i use mg995 servo, use same coding or not?
The same code nothing to change it
i use mg 996r servo motor and inductive proximity sensor but why the sensor not function when sensor detect
@@afiqmarzuki9731 check it back wire connection or sensor voltage,this code should work
جزاك الله خيرا
Can you specify the materials being used, please one by one
i followed this tutorial but why i have not get same output
You means the sensor is not detected?
athu accent naala thaanaa vaela seiuthu
Good work
how to put delay on the servo motor?
Can you show ne the 12 volt power supply DC
Hi sir can get water vending machine coin acceptor circuit diagram
can i have the coding for this please
can i get the schematic circuit diagram
how can the capacitive sensor detect paper?is it possible?
Yes can detect paper as well.
what kind of 12 volts power supply is used?
and is it possible to use 9v battery?
@@justmychannel8755 yes, you can use 9v
@@justmychannel8755 I just use 12VDC Adapter
thala morattu accent
Hello there, where should we put the wires of the capacitive proximity sensor and inductive proximity sensor? The object passes through both an inductive sensor and a capacitive sensor, and it will detect plastic only.
Same issue here. I'm wondering if I haven't by inductive sensors instead of inductive and capacitive.
What do you call that white connector?
That is just pvc press type connector you can use any connector