That's true. If you make a disk sander from the pulley on the motor, this machine will be more useful. Since i built mine, i can sharpen my drill bits accurately. Sorry for spamming, but here is mine: ruclips.net/video/N-B4-VYqd3k/видео.html
After watching well made video production and quality builds I stumbled on this video and I’m like: boy that is some crude rough measuring and all… then I’m like… man that’s still better than what I would muster up. Good job
@@DIY-vv4fu Спокойно, като го направя, лично ще те уведомя. А преди да задаваш глупави и ехидни въпроси, бих те посъветвал първо да прочетеш коментара ми, и да се увериш че го разбираш.
Wow truly a nice simple effective machine. You should be very proud. I made one a couple years back just out of scrap and a treadmill motor. I had like 3 bucks in it and though it does still do a good job I thin it is time to do another one right. I will be blending a few that I seen Together but this is really close to what I want to build.
People who have never gone through that with a bench grinder don’t REALLY know what it’s like to want a belt grinder. It’s like a rite of passage: you must wear out at least one bench wheel before you get a fancy belt setup.
Great video. You have some new innovations, particularly the use of a compression counterbalance instead of an expansion spring. Don't know why more people don't do that. Expansion springs break all the time. Since you don't have a mill you should use your plasma cutter more often. It seems to leave a nice clean edge. Loved that you slotted with it. Would have liked to have seen how it did on the curved slot. I really enjoyed watching you work. Looks like this 4th of the July weekend I'll be starting on mine. Sorry honey.
Came here from Made in Poland. A guy there had said you have a good channel yourself. He was right! I've subbed to your channel. BTW the coke can made me LOL.
I like this design. The circumfrence of the wheels on the grinding surface and backing plate should be colinear. This will ensure no space between the belt and backing plate. Your setup has about 1/8th space between belt and plate. This will give bevel grinds a radius.
That is one of the best I have seen. I would love to build the same thing. Any chance you would provide some measurements and other necessary information? I am willing to pay for the info. Thanks for a great video.
right that's it i realy need to get in the shed an start makeing stuff again!! been wanting to make one off these for ages as i make swords and knifes and i gring the blades on a cheep buggerd belt sander i now have to atach my drill to to get it to work!! that said it dose work fine could do with a bit more power though, not to much or i'll loose my fingers haha, love you videos!!
Very nice. Love the adjustability n using a ram instead of spring for tension. Maybe down the line you can wire in a potentiometer or a step switch so you can adjust the speed. Another great build though. I want one
Nice design. Just a note for people who are gonna build one after seeing this...you DON'T need THAT much weld bead on stuff!!! You'll probably save yourself a week of work and $50 in wire if you just weld things as much as they actually need to be, LOL :-D
Nice work man. Almost identical to mine except I used treadmill motor and speed control☺ One good thing to do is get some ceramic stove glass and attach to your platen (double sided tape and small "shelf" beneath it) Otherwise over time you'll wear into it 😉
@@WorkshopFromScratch Yeah it works very well and there is always a large flywheel on it that can be used as the drive wheel ☺ Speed control is nice so wood doesn't burn from high speed. Subbed to see what you come up with next and greetings from Ireland 🍀
In the case of woodworking, speed control is very necessary, I also need to mount speed control because maximum speed is not always needed :) Greetings from Poland :)
@@WorkshopFromScratch Treadmill motor is nice because it's dc so easy enough to control speed. If your motor is ac, maybe look at a variable frequency drive (Google VFD) 👍
This is far the best precision engineered belt sander I’ve witnessed on RUclips. Do you have the dimensions on how to build one? As I’d gladly like to craft a replica out of stainless. I work with stainless you see. Best wishes.
Hey Shane; I liked and enjoyed this build as well, but if you're interested in a belt grinder build that truly out does them all, here's pt 1 [below]: Granted; in order to duplicate this build you'd need more than just DIY hand tools, but even so a version of this could be built on some level. Anyway it's great just watching + there's many good ideas. Enjoy! ruclips.net/video/gaIVzdJ2V5w/видео.html
@@filipstrelicak5227 I believe I got them from the video, there were pics I can´t see now, send me your email and I'll send them to you as I saved them by the time.
Dear Sir, Nice video. I have built a similar 2 x 72 grinder. The Tracking Wheel assembly on mine has not worked out very well. Your piston type assembly might work for me. Can you tell me where you got your's and maybe I could adapt it to fit my unit. I would greatly appreciate any help.
Geil...ich denk, das ist das coolste Design eines bandschleifers auf yt. Super simpel...sogar schwenkbar! Reduziert zum maximum. Respekt! Kosten...wahrscheinlich keine 150 Euro?
Danke :) Die Kosten sind wirklich vernachlässigbar, da fast alles aus Schrott stammt und der Motor von einem beschädigten Hydrophor stammt. Das einzige, was ich neu gekauft habe, waren Rollen von einem Palettenhubwagen, die ungefähr 4 Euro pro Stück kosten
Another great build. Clearly you don't just start without having a design to work from. Do you work from a set of drawings that you have designed yourself or are there resources available online that you can download and use as a template that you can modify as you go along?
Man that works it's amazing, I'm from Argentina, I would like to try made one for me, it so possible to have we plans, to take the rigth measures. PD: THANKS for share this videos
An excellent build! Bravo! However, I feel I must point out that your drill press is in serious need of some TLC (Tender Loving Care). It needs to be cleaned up with a little maintenance. Take care of your tools and they will serve you well for years! :)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I've got to stop watching these builds. I don't know which one to build FIRST ! WOW...I love these builds!!! THANKS FOR POSTING
Cutting, tapping, drilling, welding, painting - finally awesome belt grinder.
Great video and belt grinder!
Such a tool make life easier :)
Thanks 😁
🖖😊
That's true. If you make a disk sander from the pulley on the motor, this machine will be more useful. Since i built mine, i can sharpen my drill bits accurately. Sorry for spamming, but here is mine: ruclips.net/video/N-B4-VYqd3k/видео.html
After watching well made video production and quality builds I stumbled on this video and I’m like: boy that is some crude rough measuring and all… then I’m like… man that’s still better than what I would muster up.
Good job
This goes on my ToDo list!! Great work!! Well done!!
做好了吗，你的砂带机
@@DIY-vv4fu Спокойно, като го направя, лично ще те уведомя. А преди да задаваш глупави и ехидни въпроси, бих те посъветвал първо да прочетеш коментара ми, и да се увериш че го разбираш.
That is the greatest can opener I ever saw!
Wow truly a nice simple effective machine. You should be very proud. I made one a couple years back just out of scrap and a treadmill motor. I had like 3 bucks in it and though it does still do a good job I thin it is time to do another one right. I will be blending a few that I seen Together but this is really close to what I want to build.
That's one awesome grinder! Love the versatility.
Love that Coke can trick!
Great grinder!
Dziękujemy za film. Świetna robota.
People who have never gone through that with a bench grinder don’t REALLY know what it’s like to want a belt grinder. It’s like a rite of passage: you must wear out at least one bench wheel before you get a fancy belt setup.
Funny to me cuz when I just started I burned the motor of my grandpa's grinding bench. It was 50 years old but still..
100% facts... lol
Great video. You have some new innovations, particularly the use of a compression counterbalance instead of an expansion spring. Don't know why more people don't do that. Expansion springs break all the time. Since you don't have a mill you should use your plasma cutter more often. It seems to leave a nice clean edge. Loved that you slotted with it. Would have liked to have seen how it did on the curved slot. I really enjoyed watching you work. Looks like this 4th of the July weekend I'll be starting on mine. Sorry honey.
Outstanding work!!!!!!!
You are a wery smart guy like made in poland 😎.
Keep Up The god work.
Very nice! I started one about four years ago I really need to get back to it. You have given me a couple ideas.
Thank you Very much 😀 I am glad that the film was useful for something :)
Un espectáculo, siempre sigo tus trabajos, sería genial un tutorial con las medidas. Exitos futuros.
It's crazy how much tools you can make yourself that are cheaper and better
I learnt lot-lot by watching your videos! Thx
Great job, thank you brother. You are so talented
Very nice work in belt grinder wow awesome idea
I realy like this homemade belt grinder
I sulute you 👍👍👍🤝🤝🤝
Thank you 😁
very clever use of the plasmacutter, thanks for this brilliant idea !!
Came here from Made in Poland. A guy there had said you have a good channel yourself. He was right! I've subbed to your channel.
BTW the coke can made me LOL.
Thank you :)
Buying the motor for the one I’m building tomorrow! Fun build.
Thank you, especially for the dimensioned pics.
I am glad that I could help :) Regards
Excellent job !!! I really like the design of this unit. Thanks for sharing.
Thank you very much :)
Your the friggin man this is so cool . Bravo genius genius !
Сколько просмотрел фидеороликов- этот самый простой в исполнении, орегинальный!!!
Beautiful work respect😁
I like this design. The circumfrence of the wheels on the grinding surface and backing plate should be colinear. This will ensure no space between the belt and backing plate. Your setup has about 1/8th space between belt and plate. This will give bevel grinds a radius.
nice job , bravo from middle East 🤗
Thank you 😀 Regards :)
Wow! Beautiful work!
Found the video I wanted, Great work and love it
Thank you 😁
💪🏽💪🏽💪🏽💪🏽💪🏽wowwwwwwwwwww keep putting up all this great content man ure incredibly talented God Bless💪🏽💪🏽💪🏽💪🏽
Well done 👍 was excellent easy information
I would give more thumps up they won't let me! great build!!
Thank you 😁
Good job❤❤❤
Great machine! One bit if advice: you need to turn the gas spring around so that the oil inside lubricates the seal!
I would never have thought of that! Thanks bruv.
That is one of the best I have seen. I would love to build the same thing. Any chance you would provide some measurements and other necessary information? I am willing to pay for the info. Thanks for a great video.
Thank you :) I give you a link to the photo with dimensions :) photos.app.goo.gl/uBezatsurbhpagJaA
I love these kinds of videos, I just wish there was a way to get the plans to build this. I would pay for them.
ماشلله به این همه هوش👏👏🖒
Awesome build man! This is the best how to that ever watched on a belt grinder! 👏👏
Thank you very much:)
That's what I'm looking for ...a sander that don't require a alot of out sourced parts..I like every thing to be in house
וואו איזה עבודה כל הכבוד לך
Bardzo dobra robota. Świetna maszyna do dalszych prac.
Dziękuję 😀 Napewno usprawni pracę nad kolejnym projektami:)
Pozdrawiam:)
szlifierka pierwsza klasa !! Profesjonalna robota
Dziękuję 😀 Pozdrawiam
right that's it i realy need to get in the shed an start makeing stuff again!! been wanting to make one off these for ages as i make swords and knifes and i gring the blades on a cheep buggerd belt sander i now have to atach my drill to to get it to work!! that said it dose work fine could do with a bit more power though, not to much or i'll loose my fingers haha, love you videos!!
Bravissimo❤️👍👍👍👍👍!!!
Dobra robota, szacun za wykonanie 👏👍
Dziękuję 😀 Pozdrawiam
Maravilloso trabajo amigo saludos
Very nice work. Congratulations.
Thank you :)
Good job!
Thanks :)
Excellent experience well done if I try I can do but I never done my self 👍👍👍👍👍👍👍👍👍
The most important thing is to dare and undertake construction and you will certainly succeed :) Thank you :)
Awesome.. Neered more design details pix👍❤
The further you get away from this belt grinder the better it looks!!!
Younus Dar if you meant looking at it from another town I agree!!
Great work.
Thank you :)
Very nice. Love the adjustability n using a ram instead of spring for tension. Maybe down the line you can wire in a potentiometer or a step switch so you can adjust the speed. Another great build though. I want one
Certainly adjustment would be useful and I will try to connect :) Thank you for the comment :) Regards
What an ingenious idea. Use a scissor jack to assist placement.
Excelente herramienta y donde se consiguen las medidas de las piezas
Видео огонь 🔥, особенно порадовал конец, лайк и подписка однозначно!))
привет от русских
I like the use of the jack.
Nice design. Just a note for people who are gonna build one after seeing this...you DON'T need THAT much weld bead on stuff!!! You'll probably save yourself a week of work and $50 in wire if you just weld things as much as they actually need to be, LOL :-D
Me gusto la explosión de la cola; jajaja muy buena ; tu diseño esta excelente .. saludos.
Nice work man. Almost identical to mine except I used treadmill motor and speed control☺ One good thing to do is get some ceramic stove glass and attach to your platen (double sided tape and small "shelf" beneath it) Otherwise over time you'll wear into it 😉
You had a brilliant idea with mounting the treadmill motor, it's a pity that I didn't think about it myself :) Thank you :) Regards
@@WorkshopFromScratch Yeah it works very well and there is always a large flywheel on it that can be used as the drive wheel ☺ Speed control is nice so wood doesn't burn from high speed. Subbed to see what you come up with next and greetings from Ireland 🍀
In the case of woodworking, speed control is very necessary, I also need to mount speed control because maximum speed is not always needed :) Greetings from Poland :)
@@WorkshopFromScratch Treadmill motor is nice because it's dc so easy enough to control speed. If your motor is ac, maybe look at a variable frequency drive (Google VFD) 👍
Very creative and nicely done!!!
I thought I had been unsubscribed from Made in Poland for a minute...😁 New Subscriber!!!👍👍
thank you very much 😀 Regards :)
Amazing job, dude! Really nice! 😃
Thank you 😀 Regards
Cool work 👍👏
thank you 😀
@@WorkshopFromScratch and you 👍👏
Great video a job well done I have a question to ask do you sell any of your items
Dewalt, Hitachi, Porter Cable and Bosch downvoted this video. Amazing work !
Thanks 😁
Great video one of the best belt grinders I have seen and also it looks easy to build with scrap metal
Thank you very much 😀 Regards
Awesome work! There's _always_ room for one more homemade belt grinder on youtube.
Thank you :)
best belt grinder ever, gooood job
Wow... that thing is amazing. Great job!
Thank you 😀
Good job 👍👍👍👍👍
Good project to make with my everlast welder and some scrap metal. thanks for this.
Bonjour, pourriez vous nous donner les dimensions des pièces svp merci. Très bon boulot !
Very good job .... from indonesian.
Thank you :)
Wow! Great job. Thanks for sharing.
Excelente trabajo, gracias por compartirlo 👍🇦🇷
Gracias :)
Great Grinder - where may I optain plans or measurements?
Thank you :) link to the photo with measurements :)
photos.app.goo.gl/uBezatsurbhpagJaA
This is far the best precision engineered belt sander I’ve witnessed on RUclips. Do you have the dimensions on how to build one? As I’d gladly like to craft a replica out of stainless. I work with stainless you see. Best wishes.
Hey Shane; I liked and enjoyed this build as well, but if you're interested in a belt grinder build that truly out does them all, here's pt 1 [below]:
Granted; in order to duplicate this build you'd need more than just DIY hand tools, but even so a version of this could be built on some level. Anyway it's great just watching + there's many good ideas. Enjoy! ruclips.net/video/gaIVzdJ2V5w/видео.html
The size does not matter here, the main ratios and angles are on the Internet
bottle opener. perfect.
thank you 😀
Beautiful...... especially it's 45 to 90 degree inclination and vertical to horizontal setup
Thank you 😁
Great job!!, and most of all, thanks for sharing your pics with the measures!!. That will help a lot. Keep it like that!!!💪
Where can i Get photos and plans please?
@@filipstrelicak5227 I believe I got them from the video, there were pics I can´t see now, send me your email and I'll send them to you as I saved them by the time.
Thats great, do you have blueprints ?
Dear Sir, Nice video. I have built a similar 2 x 72 grinder. The Tracking Wheel assembly on mine has not worked out very well. Your piston type assembly might work for me. Can you tell me where you got your's and maybe I could adapt it to fit my unit. I would greatly appreciate any help.
What do you do with the produce you made? Use or for sale?
Great project, sorry I missed your premier, had to work.!.
Thank you very much 😀 Regards :)
Oh ya very good. Versatile!
Thank you very much:)
Geil...ich denk, das ist das coolste Design eines bandschleifers auf yt. Super simpel...sogar schwenkbar! Reduziert zum maximum. Respekt! Kosten...wahrscheinlich keine 150 Euro?
Danke :) Die Kosten sind wirklich vernachlässigbar, da fast alles aus Schrott stammt und der Motor von einem beschädigten Hydrophor stammt. Das einzige, was ich neu gekauft habe, waren Rollen von einem Palettenhubwagen, die ungefähr 4 Euro pro Stück kosten
Another great build. Clearly you don't just start without having a design to work from. Do you work from a set of drawings that you have designed yourself or are there resources available online that you can download and use as a template that you can modify as you go along?
Really cool! How many newton has the gas spring?
Thank you:) 150N
Man that works it's amazing, I'm from Argentina, I would like to try made one for me, it so possible to have we plans, to take the rigth measures.
PD: THANKS for share this videos
Very much admired your work !!! Definitely like ;))) the Most simple project of grinder.
Thank you very much:)
Great work. Next time you might consider plasma cutting the radial slot.
How do you affix the pallet cart wheel to the motor? Is there a spindle with a nut on the end? Do you need to make a sleeve for the wheel?
An excellent build! Bravo! However, I feel I must point out that your drill press is in serious need of some TLC (Tender Loving Care). It needs to be cleaned up with a little maintenance. Take care of your tools and they will serve you well for years! :)
Don't worry...he'll just build another one, only BETTER ! 🤔
Nice work friend! Looks like you have a really useful addition to the shop. New sub here, watching your back catalogue- thanks for sharing :)
Thank you very much :)
Недавно подписался на канал.
Этот умелец токарный станок ещё не собрал??
😉
Great job 👍 kindly send me measurements of your project
Thanks !! great job(s) .. Do you have plans available for your projects ?