U can do keys by the OBD on Land Rover as long as the alarm isn’t active and the kvm isn’t locked and it’s random some come locked some don’t so I’ve seen even a 2022 Land Rover u can do by OBD
Good morning Curtis, at the beginning of the OBD procedure, the introductory info page says that "if you have a radio control with a 315mhz frequency, the procedure can be used on the original RFA"... I ask you if this means that in the case of 433mhz keys therefore not Is this OBD procedure possible? Do you have info about the 433mhz version? Thank you.
Hello , I personally haven't came across this situation so at this time I dont have a direct answer. The procedure that you can suggest your supplier to do have them log in the device and do the procedure with you until you get the error ( when the remote function doesnt sync) then they would submit a data logging with a description of the problem. Then engineer would be able to observe the session and verify if its a key issue, module issue or software issue on the tablet. Im sure there is a solution I just havent had the issue with my clients to find a remedy .
@@AutelConsultancy Thanks for the reply, it’s just that abrites offers an emulator for it, Lonsdor has a Modify vehicle config -> Disable UWB function, but I don’t own these tools, and Autel tech support has no clue about this issue either. Feel free to lookup “Lonsdor Land Rover UWB blog” it’s the first result I believe it might be a key issue? As in, if you have the right key it shouldn’t be an issue, but if you don’t, this can be used to make it work? Which keys would you recommend? Oem only?
What I suggest if you want me to educate you thoroughly and give you training on the tool to book a diagnostic tool consultation with me. If you just need general information and dont need training you can contact autel new york .
@@hendogg1299 I need about 45 minutes and its cost 97 USD. Alternatively you if you looking for general information you can contact Autel New York. Im not affiliated with them and they don't have a framework that will guarantee they gave you all the information you need to make an educated decision.
Thanks for sharing your experience with us boss
Your the best man
U can do keys by the OBD on Land Rover as long as the alarm isn’t active and the kvm isn’t locked and it’s random some come locked some don’t so I’ve seen even a 2022 Land Rover u can do by OBD
Спасибо
Good morning Curtis, at the beginning of the OBD procedure, the introductory info page says that "if you have a radio control with a 315mhz frequency, the procedure can be used on the original RFA"... I ask you if this means that in the case of 433mhz keys therefore not Is this OBD procedure possible? Do you have info about the 433mhz version? Thank you.
Case study is my favorite . Thanks, Curtis 👍.
My Pleasure. Hope you enjoyed it
Hey Curtis thanks for the vid, still didn’t get an answer what to do when the remote function doesn’t sync, I heard you need to modify the UWB showhow
Hello , I personally haven't came across this situation so at this time I dont have a direct answer. The procedure that you can suggest your supplier to do have them log in the device and do the procedure with you until you get the error ( when the remote function doesnt sync) then they would submit a data logging with a description of the problem. Then engineer would be able to observe the session and verify if its a key issue, module issue or software issue on the tablet. Im sure there is a solution I just havent had the issue with my clients to find a remedy .
@@AutelConsultancy Thanks for the reply, it’s just that abrites offers an emulator for it, Lonsdor has a Modify vehicle config -> Disable UWB function, but I don’t own these tools, and Autel tech support has no clue about this issue either.
Feel free to lookup “Lonsdor Land Rover UWB blog” it’s the first result
I believe it might be a key issue? As in, if you have the right key it shouldn’t be an issue, but if you don’t, this can be used to make it work?
Which keys would you recommend? Oem only?
Do you have any groups or links for us to join
Same here bro
what's the difference between the 508 and 608? what's the difference between the s, 2, and pro?
What I suggest if you want me to educate you thoroughly and give you training on the tool to book a diagnostic tool consultation with me. If you just need general information and dont need training you can contact autel new york .
@AutelConsultancy how long is it and does it cost anything? I'm new to scan tools but not to automotive.
@@hendogg1299 I need about 45 minutes and its cost 97 USD. Alternatively you if you looking for general information you can contact Autel New York. Im not affiliated with them and they don't have a framework that will guarantee they gave you all the information you need to make an educated decision.
@AutelConsultancy 97 dollars? That ain't bad to get me going on the right direction. Thank you sir I'll book an appointment. 💪🏿
Pls let’s me know