IM608 PRO Case Study How to Replace and Program a BCM on a 2017 Ram ProMaster
HTML-код
- Опубликовано: 10 сен 2024
- Join me today as we navigate through the meticulous process of a BCM replacement on a 2017 Ram ProMaster. In this case study, I am going to show you the process of a BCM replacement on a 2017 Ram ProMaster .
We’re not just swapping out parts; we’re running into several obstacle such as getting the security PIN , Programming the Module and Getting the Radio Anti- Theft Pin Here's what you'll learn:
🔑 The step-by-step method to accurately diagnose and replace a BCM.
🔄 How to use the IM608 to retrieve the key code vital for the programming phase.
📻 Navigating the WiTech software to reprogram the BCM and resolve radio code snags.
By the end of our journey, you'll be armed with knowledge that will save you time, money, and the headaches of trial and error. And remember, with the IM608, you're not just fixing problems-you're elevating your auto repair game to pro status.
Looking to gear up with the IM608? Dash over to auteltech.co.za and get your hands on the latest Autel equipment and 1 on 1 training.
Enjoy
Tech2 - radio reprogramming VIN Relearn
A couple of weeks ago, we swapped the ram promaster 2500 van 2023 into a box truck ram pro master 3500 of 2017. Absolutely everything (engine, transmission, wiring, everything) Only one blind mirror sensor was missing. After 60 miles, there was first an error on the battery and then absolutely all the errors on the dashboard, including the transmission. The dealer station said that it was the missing blind mirror sensor. What do you think about this?
Thanks for sharing ❤
Hi sir. It s possible replacement bcm for one bcm used .?
It depends on what vehicle you're working on and what equipment you have.
@@AutelConsultancy it 2016 Ram pro master 1500
I have im608 pro II
I fell asleep when you mentioned Ram 😴 hope yr well though Curtis.
How connect to PC with my vcim?
Does Autel not allow reading info on all Promasters, or was this vehicle just an issue?
HI Jay, when you say reading are you referring to obtaining the pin code? Or doing special functions
@AutelConsultancy sorry, when you were trying to backup the data. I'm just wondering if it was just this specific Promaster, or does the IM608 not work for any? I had an issue with a 16 Q5. I've done many, but for some reason on that one, when pulling data from the car, it would go to 99%, then cycle back to the beginning, get to 99% again, then fail. I usually don't have problems adding keys for Audi, even that year Q5 model, but I think it was just an issue with that specific car.
@@jaymoney4265 I would say its VIN specific. It could be a variation of things such as software issues with the Autel , or just the way the module is that i wont allow us to do it. Usually what I have to do in cases that you describe is have my engineer analyze the session to determine if its a software glitch. If it is they would create a patch that will address the issue. Or they will tell me flat out that the autel doesnt support the vin.
Did you finish flashing the BCM using JVCI +? I’m unable to flash even using Witech
I think he had a Cardaq. I remember when I prepared his computer he just told me he bought the Cardaq so he wanted me to use this for the procedure. I have used the Autel JVCI many times and haven't had an issue.
@@AutelConsultancy the shop I was doing work with called me and updated me with the fix. They sent the Promaster to another dealer who also could not get the BCM to flash(I was concerned it was a hardware/software issue on my end). They wound up getting an engineer on the phone that determined the new BCM out the box was defective. They replaced the BCM and were able to flash with no issues.
@@bombmanize i had issues also I tried programming a new bcm (16 Promaster) using my jvci+ plus with witech and it would always come back as” unable to write data to bcm….” witech help desk was no use since the j box wasn’t a “verified” vci. Took it to the dealer and they programmed it with no issues.
Its been my experience these vehicles use a rolling 4 digit PIN code, the 5 digit calculated by the IM608 will not work.
Use multiple scan tools to read PIN code before starting replacement
What tools??