How to build a closet organizer with drawers and shelving (only 2 power tools)
HTML-код
- Опубликовано: 22 авг 2024
- - Building your own custom closet from a builder grade reach-in closet isn't as hard as you think.
I will show you how to do it with a circular saw and power drill and a few other awesome little jigs.
***This project is sponsored by @KregToolCompany ***
See lots of project inspiration at kregtool.com
Plans for this closet - learn.kregtool...
Which Kreg Jig to use - • Which Kreg Jig to Buy ...
How to use a Kreg 720 - • How to use the NEW Kre...
How to use a Circular saw - • How to use a Circular ...
👉🏼 Grab the pocket hole guide here - anikasdiylife....
Tools and materials used (affiliate links):
- Plywood and dimensional boards per the plans.
- Concrete contact paper - amzn.to/3f4U1dw
- Kreg Rip-Cut - amzn.to/3SjvaB8
- 1 1/4" pocket hole screws -amzn.to/3eWaYGU
- Kreg Quick Flip - amzn.to/37dRM4a
- wood glue - amzn.to/3avQmmG
- Miter saw - homedepot.sjv....
- Pocket hole Jig. I used the Kreg Jig 720 - amzn.to/3vbSFjR
- Drill/Driver - homedepot.sjv....
- Circular saw - homedepot.sjv....
- Edge-banding to match the plywood
- 10" drawer slides - amzn.to/3QZbtxs
- Kreg Drawer Slide Jig - amzn.to/3fbyj7S
- Kreg multi-mark tool - amzn.to/3dCQfrg
- Kreg shelf pin jig - amzn.to/3qXJ8Nn
- Kreg face clamp - amzn.to/3qWcBHy
- Kreg right angle clamp - amzn.to/3qUnJEJ
- Kreg hardware jig - amzn.to/3UpB5X8
- Cabinet hardware of choice
- Primer and paint in the color of your choice
- Household iron.
Hearing protection - ISOTunes Pro 2.0 - Get $10 off with code ANIKA10 - bit.ly/2Xydney
Wall Control Metal pegboards - www.wallcontro...?aff=59
💗 Subscribe to my Channel 💗 www.anikasdiyl...
Anika’s DIY Life is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Watched several DYI shelve videos, this is the first one that addressed drawers, shelves, trim toe-kicks and un-even gaps in a nice concise way. Thank you!
Wow, thank you!
As a low voltage techy, thank you for being conscious and planning around that crawl space 😅.
I enjoyed your video and i was happy you showed realistic mistakes you can make when bldg something like this.
Glad you enjoyed!
Strong work, Anika. This is a great closet organizer and gives many ideas for other projects such as craft tables and drawers. And it's good to show mistakes -- we all make them -- and how to overcome them instead of editing them out of the video. Thanks.
Thank you!! Learning 💯 happens through mistakes 😀 and I make them so you don’t have to 😁
It's great seeing someone doing woodworking without a table saw.
I really thought it was great that you showed those small mistakes and how you recovered from them.
I find a get a ton of play with my Kreg rip cut and cross cut jigs. I am also considering upgrading from a Ryobi circular saw. Any advice?
One trick I picked up is to use foam insulation board for large cuts on the ground. It works far better for me than using scrap wood to keep the board off the ground. The circular saw goes through the foam like it's nothing, and the whole piece is supported.
Thanks for the great video!
So glad you enjoyed the project. With the rip cut, make sure all the screws are nice and tight - especially the ones that hold the saw in place.
I know foam insulation is very popular but I don’t have space to store the sheets. It is so much easier to store 4x4 boards and blocks.
You always do a phenomenal job!! I love watching your videos❤
Okay I have looked at tons of videos but not many of them have made me believe I can do it thanks for the inspiration and tools some I didn’t know existed. Everything looks great
I am so happy to hear that! My goal is to help as many people realize that they can totally do it! Let me know if you have any questions!
I know right!! I get nervous when I hear power tools or tools and cutting after having people ppl around that could do it for me. I hadn't realized how much I've depended on others to do it that I never learned or tried myself. Now I want to just do it myself and this gave me that boost of confidence I had back when I was new to adult life.
Sometimes it's just more rewarding to do it all yourself and see how amazing you are.
That's why I always dry-fit everything first before putting glue on it when I was looking at the plans I was thinking about how it looked like the holes lined up.
Nice!
This looks really cool. Can't wait to finally buy the mitre saw, I have my eye on but no place to put it yet.
Thank you for making working with power tools look less scary :)
Thank you! Have fun!
Everything shown in the video was carefully and practically thought out, I greatly appreciate it.
Glad to hear it! Thanks
"This is the problem with houses ... " 🤣 So true!
Accidentally stumbled on this site and in one video it became my favorite.👍🏻
Thank you so much! That means a lot! What did you find the most useful or inspiring?
@@Anikasdiylife There are a few things: not relying on assumed knowledge of the viewer, video quality that makes it easy to follow along, and easy explanations.
Not kidding; I'm a fan!
Nice job
thanks!
Omg! Subscribed!
Thanks for subbing!
Great job!
Thanks!
Anika.. i like your style.. first time viewer.. great job
Thank you so much 🙂
Well done darling!
👍🏻😁
Thank you!
Impressive!
Thanks you!
Enjoyed your video! A little intimidated by the pocket hole device. One question: Is there adequate clearance for the drawers to open, can't tell from the reveal. Thanks for helping demystify woodworking for this wannabe diyer!
absolutely understand! The pocket holes can be intimidating! I have a free workshop coming up that might help! www.anikasdiylife.com/phn-secrets and yes there's plenty of clearance :D
@@Anikasdiylife Hi Anika, really enjoy your videos. One mystery: Everything I've read says that a hanger needs 12" from back closet wall for clothes to fit, but seems like shelf depths are around 11.25", which won't fit the round rod hanging attachment. So I've been cutting shelf side panels closer to 13" D. What's the real measurement on this? Thank you so much!
17:20 there were problems i ran into while building this closet to specs that are given. 1- the drawers that are built do not fit properly when adding drawer slides. You have to have a 1/2 inch on each side and these do not meet that. After building the drawers they are 33" and the framing is 33 3/4" 2- when following your direction on installing the 2nd drawer using the kreg drawer guide you can not use the guide to rest your drawer on to attach the slide to the drawer. It leaves to big of a gap between the doors. It looks like you ended moving them but there was never mention of this. I wish these problems would of been addressed before i started building everything. It causes frustration when things do not line up as they should
merci pour ton partage a+
You're welcome!
Really like your videos and soon I will tackle my own closet. I do have a question. Why does everyone use pocket holes so much instead of just screwing a board from the other side. i.e. when joining a board perpendicular to another board? Seems like much simpler. Is it only to hide the screws or nails. Don’t think it’s any stronger. Thanks for your reply.
Great question Steven! There are lots of reasons to use pocket holes:
Extremely beginner-friendly! Once you understand the settings, you can make pocket holes and joints in a matter of minutes.
The joint is super strong. The angled screw produces a huge clamping pressure. When coupled with wood glue it makes a really strong joint.
There is no clamping and waiting for glue to dry. Make the joint and move on to the next step. It helps get more done in less time.
It makes the alignment of two boards extremely straightforward.
More info for you here: www.anikasdiylife.com/use-kreg-pocket-hole-jig-video
I wanted to see how other ww built their closets. I didn't want the drawers to be too skinny or deep and I didn't want to take way hanger space.. since its for my 14 yrs daughter... I am using mdf... just so I wouldn't have to paint it... and to save $50-60.00, but this look really good!!
Thanks! Glad it helped!
Wow ur a beast
ha thanks!
Hi can you tell me what paper do you used on the wall? Thanks you amazing job
Anika, I love your closet organizer video and am considering doing something similar in my closet. I need to adapt your dimensions to mine and would like to know what software I can use to help with drawer size? Thank you, Robert.
You can do it! I used sketchup for designing. I also have a video on drawer building which you may find helpful
Girl, I’m gonna need the name of all the blue tools you used. Starting to build from scratch here.
Great project!!! Looking to do something like this in my Grandsons closet. What are the shims you use for creating the the even gaps between the drawers??
They are reusable plastic shims. amzn.to/3TU340n
I wish you could teach me. I want to do this but power tools scare me !
😢😢 ❤❤ انتي جميلة جداً ❤
What thickness of plywood are you using?
I am using 3/4”
How do you measure to make the drawers? I’m very intimidated
Following!
Looks really close at the top to use it
The inside is much taller so you don't see the full space.
But surprised by the “only 2 power tools” comment at the start. I saw 3 within the first two minutes. Stopped watching then. Bye
I wish you had kept watching, I did explain that I used my miter saw but the cuts can all be done with the circular saw. This entire build CAN be done with only 2 power tools.
Not when you're partially disabled with no help.
17:20 there were problems i ran into while building this closet to specs that are given. 1- the drawers that are built do not fit properly when adding drawer slides. You have to have a 1/2 inch on each side and these do not meet that. After building the drawers they are 33" and the framing is 33 3/4" 2- when following your direction on installing the 2nd drawer using the kreg drawer guide you can not use the guide to rest your drawer on to attach the slide to the drawer. It leaves to big of a gap between the doors. It looks like you ended moving them but there was never mention of this. I wish these problems would of been addressed before i started building everything. It causes frustration when things do not line up as they should