I liked your analysis of the problem and coming up with a solution. Many consumer appliances have such built in design faults. It requies to expose such things. Kudos to you.
Thank you so much. I'm glad you found it useful. Feel free to check out my other videos as well and do subscribe to my channel it helps to keep me motivated and create more content.
I'm glad i got a solution for you to try out! Do let me know how it turns out going forward. And don't forget to distribute clothes weight evenly prior to spin cycle. If you found this video useful, please do subscribe.
Great insight of a planned faulty design, I guess a small o ring within the plastic body should be able to stop the grease leaking out but was never designed for one.
I watched some videos of repair personnel but yours gives insight into what really goes wrong explaining that the gaps become too big. Thanks, very good explaining
I have ifb topload shockers bushes are same but the springs colors tow of them gold and two of them steel...which color spring has install front and back side..pls rwply me.
Unfortunately I do not have a answer for this, please try to remember which spring was in which position at time of opening or else refer to the user manual for information if any
Standard, 6 inch nylon cable ties. You can ask in your hardware store buying many together is cheaper. Please do subscribe to my channel if you found the video useful.
Bro...i have ifb topload..new rods are installed stiil it is banging like anything...pls tell me the roda are having gold and silver color... which color has to install front and rear side.
Thank you so much for watching my video. Sure do try and let me know how it goes, would love know. Buying an entire new washing machine just because of one part never really made sense to me.
Mine LG TOP LOADING WASHING MACHINE...drum banging either side .. on start of SPIN MODE...and changing to Rinse and spin mode again .. Even upon changing .mthe four suspension spring ..blue and white ..no improvement.....pls guide ..what else can be problem... drum banging to sides ..and cloths are bundleing to one side drum is banging to sides...
Best solution is to replace the dampner rod, u can new in shop or on Amazon for 1500rs. If you don't want to replace the rod then at the start of the cycle make sure the clothes are not entangled and the weight is evenly distributed. If your washing has low spin mode then that would help too.
OK, you can replace the parts but there is a secret that most dont know. That is that the tube is missing that would provide dampening. Friction is not a good dampening element because it changes and with wear, very little friction exists so it needs the external cylinder.
I agree with what you said. Frictional dampening is a short term solution. Its just another example of planned obsolescence. Makes me feel sad that millions of units like these will be discarded just because of this bad design. Imagine so many otherwise perfectly fine machines being decommissioned.
Logic board me problem ho sakti hai ya fir water intake valve me. Valve me problem hoga toh tode saste me repair hoga. Logic board ka repair mahenga padega. 3k se zyada bole toh naya machine mena consider karo
Its not a regular grease,its sticky.i see it every where every store in my city and no body knowed.so i try to use Mouse Glue. And it works,but not permanent.
@@TheDonjovi whit thing that you are referring to is actually, glue to connect plastic pipes for leakage, it has nothing to do with rod suspension. You explanations is absolutely in correct.
No this won't last beyond 6 months after that u may have to do it again. Permanent solution is to get new dampner rods. It's available on Amazon for 1.5k rs.
I'm glad it did work out for you. This method may need maintenance after 6-7 months. You can try using metal washer rings instead of cable tie for more permanent solution, but it may damage the plastic.
The fix lasted a good 8 months after which one of the nylon ties broke apart and slowly and steadily due to imbalance the rest gave way too. I simply used fresh nylon ties again and it's going great for quite some time now. The other alternative is to replace the entire rod set but that's not going to last beyond a couple of years on regular daily use too. This issue arises due to unbalanced loading of clothes in the first place resulting in some of the rods wearing out earlier than others. If you found this video useful do consider subscribing to support the channel.
Do not put any Lithium White Grease on the rod. It will become very stiff and sticky in time until the spring cannot function freely. When the spring doesn’t function freely the computer detects it and stops the machine from spinning. There is NOTHING wrong with your rods or springs. Just use regular bearing grease on it and you will get years of trouble free service from them.
Yes it is! It does last about 3-4 months on regular use. A lot depends on clothes weight distribution. You can always purchase new part which will cost a significant percentage of your depreciated appliance value or new appliances which is over kill and is like buying a new house because your light bulb stopped working. At the very core it's more about planned obsolescence or bad part design. I observed having rubber rolls secured by cable ties make this solution last much longer but again weight distribution of clothes is key.
@@Live_Loud i see new machines with active weight distribution monitoring system. It alerts you if there is an imbalance and/corrects for the imbalance. Just leads to more complicated system.
Hai brother, can you please help me, samsung fully automatic washing machine top load, stainless steel drum can we remove, steel had a rust, so how much price to replace steel drum, 7.5kg
Im not sure about the price but it will definitely be high, you can buy a new machine instead. You can get semi automatic from 6k₹ and fully automatic from 10k₹
Mucha retórica eso es para técnicos. No.para otras personas. Los dueños.de.lavadoras no saben esto se manualidades o.sea mecanica de banco. Manualidades?????
7:41 I have the same problem with the my washer mostly sounds like halicopter during the spinning cycle, how much tight is it going to be to achieve good result? Thanks for sharing the idea
I have 7kg IFB top load and I want shoker to replace.. What is diff between company and local market...Have you give me the address for buying this.. Contact also please..
I liked your analysis of the problem and coming up with a solution.
Many consumer appliances have such built in design faults. It requies to expose such things. Kudos to you.
Thank you so much. I'm glad you found it useful.
Feel free to check out my other videos as well and do subscribe to my channel it helps to keep me motivated and create more content.
😊😊
Cheers from Australia mate. Did my Simpson 7.5kg washing machine the other day.
I'm glad i got a solution for you to try out! Do let me know how it turns out going forward. And don't forget to distribute clothes weight evenly prior to spin cycle. If you found this video useful, please do subscribe.
Great insight of a planned faulty design, I guess a small o ring within the plastic body should be able to stop the grease leaking out but was never designed for one.
Really good bro. I tried to replace them. But since mine is not branded, it was not successful. Thanks for this!!
I got one top load machine, have to try your tips. If successful will give result.
Good video. Very informative. Thank you.
You're welcome, don't forget to subscribe.
Nicely described, Thank you.
You're welcome
Please do subscribe to my channel, it will help me make more helpful videos
Really great thinking and suggestions
Verry good Sir
Gosh I was bothering about how to open drum. That huge nut is as big as 2 inch no wrench is available here. 🤦🏻♂️
Can you do some with Fisher&paykel, thanks
I'm sorry i do not have access to these machines
Good Video. Thanks
Thanks a lot for your sharing.
You're welcome, don't forget to subscribe
I watched some videos of repair personnel but yours gives insight into what really goes wrong explaining that the gaps become too big. Thanks, very good explaining
Thank you so much, means alot..
Please do subscribe to my channel, it will help me make more helpful videos
Which place the blue one and white one shouker where to stuck in washing machine front side or back side ?? Plz tell me
I have ifb topload shockers bushes are same but the springs colors tow of them gold and two of them steel...which color spring has install front and back side..pls rwply me.
Unfortunately I do not have a answer for this, please try to remember which spring was in which position at time of opening or else refer to the user manual for information if any
Hi, what type of (size, material type) cable ties did you use for this?
Standard, 6 inch nylon cable ties.
You can ask in your hardware store buying many together is cheaper.
Please do subscribe to my channel if you found the video useful.
Bro...i have ifb topload..new rods are installed stiil it is banging like anything...pls tell me the roda are having gold and silver color... which color has to install front and rear side.
very nice. i have exactly the same problem. im going to try this fix tomorrow. thank you so much for this sharing💐
Thank you so much for watching my video.
Sure do try and let me know how it goes, would love know.
Buying an entire new washing machine just because of one part never really made sense to me.
@@day_dreamer_dan alright. brb.
yeah, me too
Please do subscribe to my channel, it will help me make more helpful videos
@@day_dreamer_dan turns out, bearing of the clutch gearbox was worn out. i just changed the bearings afterward.
@@ahmadsyahmi351 woah how did you spot the problem? How did you fix it?
Mine LG TOP LOADING WASHING MACHINE...drum banging either side .. on start of SPIN MODE...and changing to Rinse and spin mode again ..
Even upon changing .mthe four suspension spring ..blue and white ..no improvement.....pls guide ..what else can be problem... drum banging to sides ..and cloths are bundleing to one side drum is banging to sides...
Best solution is to replace the dampner rod, u can new in shop or on Amazon for 1500rs. If you don't want to replace the rod then at the start of the cycle make sure the clothes are not entangled and the weight is evenly distributed. If your washing has low spin mode then that would help too.
Please do subscribe to my channel
OK, you can replace the parts but there is a secret that most dont know. That is that the tube is missing that would provide dampening. Friction is not a good dampening element because it changes and with wear, very little friction exists so it needs the external cylinder.
I agree with what you said. Frictional dampening is a short term solution. Its just another example of planned obsolescence. Makes me feel sad that millions of units like these will be discarded just because of this bad design. Imagine so many otherwise perfectly fine machines being decommissioned.
Good
I tried this and it doesn’t stop the tub from swaying side to side. I’ve replaced all 4 rods and even changed the hub.
Tq for the info fren
Bhai lg wahing machine spian start hote he water le lene lgti h kya problem h
Logic board me problem ho sakti hai ya fir water intake valve me. Valve me problem hoga toh tode saste me repair hoga. Logic board ka repair mahenga padega. 3k se zyada bole toh naya machine mena consider karo
This is balance problem, when spin starts it hits the switch top back of machine, if balance is right, drum will not hit that switch
how can conform with out load?
You are change spring rods. But 4 sides and inner heavy dust . You are not cleaning that.remove and fixing not shown clearly. Any how good.
Sir company use the sticky material on the spring rods to control the movement what is this material
It probably is just normal grease
Its not a regular grease,its sticky.i see it every where every store in my city and no body knowed.so i try to use Mouse Glue.
And it works,but not permanent.
@@TheDonjovi whit thing that you are referring to is actually, glue to connect plastic pipes for leakage, it has nothing to do with rod suspension. You explanations is absolutely in correct.
Should I let this be a permanent solution?
No this won't last beyond 6 months after that u may have to do it again.
Permanent solution is to get new dampner rods. It's available on Amazon for 1.5k rs.
No best more time spend to seen the shoker spring
👌👌👌👌
This dont work. I tried this and its still spinning violently. 😑
At this point you can either replace the suspension rods with new ones or buy a new machine. Thank you for watching. Please do consider subscribing.
Same here, new rods did nothing to help
@@timbrown479 We need to go back to old school mechanical timer Kenmore washers. Fuck the energy guide and environment. 😑
💚
mic bro.
Please come to the point quickly avoid
Bro you can increase the playback speed man !
English ko 6odo.. Hindi bolo Bhai .. 😅😅😅😅😅😅😅
You nailed it brother. The plastic parts were moving freely on my old suspension rods. Just replaced them.
Thank you for your kind words of support.
Please do consider subscribing it helps keep me motivated
It was the lockdown , so I try do this 😂this works perfectly ,
I'm glad it did work out for you.
This method may need maintenance after 6-7 months. You can try using metal washer rings instead of cable tie for more permanent solution, but it may damage the plastic.
Please do subscribe to my channel, it will help me make more helpful videos
Thank you for this tutorial
You're welcome!
How long did the repair last?
The fix lasted a good 8 months after which one of the nylon ties broke apart and slowly and steadily due to imbalance the rest gave way too. I simply used fresh nylon ties again and it's going great for quite some time now. The other alternative is to replace the entire rod set but that's not going to last beyond a couple of years on regular daily use too. This issue arises due to unbalanced loading of clothes in the first place resulting in some of the rods wearing out earlier than others.
If you found this video useful do consider subscribing to support the channel.
Possessed🤣🤣
🤣🤣
Please do subscribe to my channel
Do not put any Lithium White Grease on the rod. It will become very stiff and sticky in time until the spring cannot function freely. When the spring doesn’t function freely the computer detects it and stops the machine from spinning. There is NOTHING wrong with your rods or springs. Just use regular bearing grease on it and you will get years of trouble free service from them.
What are exact possible reasons for drum unbalance during spin hitting body
1. Uneven flooring
2. Uneven clothes load distribution
3. Worn out dampner rods
4. Incorrect dampner rod installation
Please do subscribe to my channel
shaking banging possessed ............ exactly wat my wife said for repairing the shocks .
This is juggad! I don't think will work even for a month!
Yes it is! It does last about 3-4 months on regular use.
A lot depends on clothes weight distribution. You can always purchase new part which will cost a significant percentage of your depreciated appliance value or new appliances which is over kill and is like buying a new house because your light bulb stopped working.
At the very core it's more about planned obsolescence or bad part design.
I observed having rubber rolls secured by cable ties make this solution last much longer but again weight distribution of clothes is key.
@@day_dreamer_dan I agree. I disposed old machine and brought new one. Electronics are not built to last these days.
@@Live_Loud i see new machines with active weight distribution monitoring system. It alerts you if there is an imbalance and/corrects for the imbalance. Just leads to more complicated system.
@@day_dreamer_dan more automation = more maintenance!
Yes you are right.
Please do subscribe to the channel it will help the channel grow.
Re apply the Sticky lube Dow Corning 111 to make these like new.
Thanks for sharing your knowledge!
You're welcome, please do consider subscribing to the channel
Bosch washing Machine spin shaking problem h
Hai brother, can you please help me, samsung fully automatic washing machine top load, stainless steel drum can we remove, steel had a rust, so how much price to replace steel drum, 7.5kg
Im not sure about the price but it will definitely be high, you can buy a new machine instead. You can get semi automatic from 6k₹ and fully automatic from 10k₹
@@day_dreamer_dan thank you, bro, does fully automatic washing machine coming with plastic drum,, this is second timeth washing machine steel rusting.
Please do subscribe to my channel, it will help me make more helpful videos
Why sound toplood LG washing
Suspension rod problem
Nice
Improve your audio quality and upload
Thank you for your suggestion. Will look into this.
Nice information thanks a lot sir
Thank you so much sir.
Each video takes a lot of efforts to create. Would appreciate if you could subscribe to my channel, thanks.
Now I need to go gemba. Very insightful video. Thanks 👍
Welcome sir
Thank you for subscribing
Mucha retórica eso es para técnicos. No.para otras personas. Los dueños.de.lavadoras no saben esto se manualidades o.sea mecanica de banco. Manualidades?????
Thanks for you solution
Perfect work perfect class
Thank you
Thank you
7:41 I have the same problem with the my washer mostly sounds like halicopter during the spinning cycle, how much tight is it going to be to achieve good result? Thanks for sharing the idea
I have 7kg IFB top load and I want shoker to replace.. What is diff between company and local market...Have you give me the address for buying this.. Contact also please..
When it's banging top load can it be the shock absorbers?
Thanks .Iam facing this problem currently.Drum hitting around the body, while spinning.
Best solution is to change rod, you will get on Amazon or local shop for 1000rs
@@day_dreamer_dan ok thanks your valuable advice.
Please do subscribe to my channel
Hindi me bol
I hope ur machine work
My suggestion go back and open and apply some white silicon grease or any u have that keep the plastic some friction .
you need to use damping grease. then you won't need to wire ties
Hay