Audiocodes MP112 Gateway Setup | VoIP Supply
HTML-код
- Опубликовано: 16 окт 2024
- Join Senior VoIP Engineer Marc Spehalski as he uses the AudioCodes MP112 FXS Gateway to make an analog phone ring with the RenegadePBX. www.voipsupply....
Hi, I’m Marc Spehalski, Senior VoIP Engineer at VoIP Supply. Today, we are going to take a look at the AudioCodes MP112 FXS Gateway and we are going to be doing a basic configuration using an analog phone, and communicating with the RenegadePBX.
First, lets take a look at what’s in the back. We have our power port, Ethernet port, two FXS ports for analog devices, and a reset button, for setting to factory defaults.
Next, we will plug in the MP112 FSX Gateway to the power on our network so we can get started. Also, plug in the analog device you’re going to use. I’m using this analog telephone.
Our objective, the AudioCodes MP112 FXS gateway, is to simply plug in an analog phone, into one of the FXS ports and have it communicate with our RenegadePBX. To start, we will log in with default credentials, which are admin for username, and admin for password, both using a capital A. I’ve already changed the IP address to one that will work on my network. By default, it will be 10 dot 1 dot 10 dot 10. This can be changed, by going to “VoIP”, “Network”, “IP Interfaces Table”, and entering it under “IP Address.”
For the next step, go to “Coders and Profiles”, “Coders”. For this example, we use G 711 A, Packetization Time 20, Rate 64, click “Submit.” Next, go to “SIP Definitions”, click “Proxy and Registration.” You want to click “Yes” for “Use Default Proxy”, click the arrow for “Proxy Set Table.” Enter in your PBX information. We’ll be using UDP for this example. Click “Submit.” Make sure “Always Use Proxy” is enabled, as well as, “Enable Registration.” We’ll enter some information for our PBX. Make sure “Subscription Mode” is “Per Endpoint” and “Registration Mode” is also by “Per Endpoint.” Click “Submit.”
Now, click on “Gateway” in “IP to IP”, click on “Hunt Group”, and “Endpoint Phone number.” We’ll use channel 1 and extension 2003, which is already programed in our RenegadePBX. Click “Submit.”
Next, go to “Analog Gateway”, and “Authentication.” We will use FXS port one, extension 2003, and I’ll enter the predefined password.
Last, we’ll click “Routing”, “Telephone to IP Routing”, enter the IP address if your PBX. Our RenegadePBX, is ten dot ten dot ten dot seven three. Use port fifty sixty for SIP, set “Transport Type” to “UDP.” Click “Submit.”
If your AudioCodes Gateway has not yet registered the PBX, you can click on “Endpoint Phone Number”, and click the button that says, “Register.” You can then check the status by clicking on “Status and Diagnostics”, “Registration Status.” We can see that FXS Port one is now registered to the PBX.
To make sure everything is working, we’ll place a test call from our IP phone, to our analog, and then from our analog to our IP phone. So first, IP to analog. I’ll dial 2003. Now for the analog I’ll dial 2002. It looks like they both work. Finally our last step to make sure everything is saved. Click on the “Burn” button in the Gateway.
So we’ve set up our AudioCodes MP112 FXS Gateway to use an analog phone, with the RenegadePBX. For any other questions regarding the MP112, you can call us at 800-398-VoIP, or go to VoIP Supply dot com. Once again, I’m Marc Spehalski, Senior VoIP Engineer at VoIP Supply. Thanks for watching.
![Oscar Maydon x Fuerza Regida - Tu Boda [Official Video]](http://i.ytimg.com/vi/_ymicn0_GYc/mqdefault.jpg)
Marc, this was fabulous. For the massive number of configuration settings, and the assumption in the manual that you know what these terms mean, you have simplified the most basic and common use case to a five minute process. I am looking forward to doing my MP114 in one window while your video runs in another.
Dont forget to go to sip deffinitions > dtmf and supp > max digits in phone number.. (also i seem to have a problem with NAT on this thing..)
This video was a lifesaver - thank you for posting it!
You're very welcome! Glad we can help!
Many thanks! Very quickly adjusted everything. Competent manual
Thank You..., it work with 3CX Server
can you do a tutorial mp114 audiocodes works with switchvox?
Hey, Rene! Thanks for the suggestion! We'll see what we can put together on our end. Stay tuned!
hello,Super, for me I am looking for the config MP112 with Alcatel oxo and confines Alcatel oxo to MP112. If you have the configue I thank you in advance? A+
Hi Alain! Thanks for the comment! Unfortunately, we do not have a video for this at the moment.
Dear Mr. Spehalski, thanks for your tutorial. I really can´t expect what 'Renegade' means. I try to register to a AVM Fritzbox and I can´t put in something appropriate to 'Registrar Name'.
The MP ist reloading the page immediatelly when I come over a view keys. (e.g. 192.16 -> reloading automatically). What is the best practice?
Thanks, w/best regards.
Hi Michael, "Registrar name" is a friendly name, a.k.a a label for internal reference. Without being able to test, there might be some input validation on the MP112 that is rejecting what you're trying to enter. You can use any name you like as long as the MP112 allows it. I'm not sure what you mean by "the MP isn't reloading the page". If there's some strange behavior with the web user interface, you should try a different browser. If that doesn't help, you can provide a step by step of what you're doing to see the behavior and we can have a better idea of what they're trying to accomplish.
There is something odd about the MP1xx devices. Certain alpha keys cause the page to reload. For instance, I tried to put in 'asterisk' and it reloaded on the 'r'. It's said that browser choice may alleviate some of this. So far, I resolved the problem by entering MySwitch which did not have an 'r' in it. A posting I read referred to a character other than 'r', so your mileage may vary.
how i can reset by code or icon ?
not on button from backend
Muito bom. Obrigado
@UCBqkepXGghBZCkUXmvmWTaQ - I configured an MP-114 to work with Zoom but when I use it as a paging system with my Bogen UTI312 I get a busy tone after hangup for about 6 seconds - which can be heard over the paging system. Any ideas?
loop current disconnect setting.
Hi...
I Configured audiocodes MP114,
I make a call from analog to ip and I get 416 unsupported media with reason "SDP: DTMF payload for RFC 2833 is missing" from the PBX..how to solve this I have tried but of no use... please help
Hi, Hari. It's tricky to troubleshoot without doing any tinkering but I would suggest you make sure the DTMF settings are the same on both the PBX and the MP114.
@@voipsupply Thanks for your reply... Actually the gate name and gateway address fields were same as the pbx domain name, hence the call was rejected with 415 unsupported (dtmf) msg ...may be my PBX is sending a incorrect reply. Now issue is solved after changing the gateway name. Thanku very much.
@@hariprasad984 No problem! We're glad you got it figured out!
Obrigado pelo vídeo, ajudou muito! Porém, tivemos muita dificuldade pois a conta SIP não registrava dejeito nenhum em nosso sistema (OpenSIPS), e com muito esforço só funcionou depois que preenchemos também o campo "Gateway registration name" com o IP do servidor. Fica a dica!
hi, thanks for the tutorial. Do you have another tutorial on setup of mp 124 ?, please help
Hi Takondwa! We do not have a video for the MP124 but please feel free to put in a ticket to our support team! voipsupply.zendesk.com/hc/en-us/requests/new
Hi,
I configured my mp-114 and it works perfectly in the last year now i replaced my analog phone and according to the guide menu i need to change the analog input from pulses to tone... How can i do it? And also how can i control the speed of the ports?
Hello,
Bonjour de France.
J'ai un souci, comment passer les deux communication du MP112 en meme temps vers le ipbx?
Salut Alain, merci de nous avoir contactés! Vous auriez besoin d'une passerelle MP FXO / FXS pour faire le pont vers le RNIS pour ce faire.
Hi Alain, thank you for reaching out to us! You would need a FXO/FXS MP Gateway to bridge to ISDN to accomplish that.
My employer uses audio code
Great choice!
убогое устройство, просто замучался менять на нём IP
Can you do a tutorial mp114 audiocodes works with Vonage vdv21?
Hey, Rene! Thanks for the suggestion! We'll see what we can put together on our end. Stay tuned!