I have seen these earrings on Pinterest and searched for how to make them and then found you. Great instructions thank you so much they really are gorgeous I have subbed too xx
Such a clear & easy video to learn from, I do the other kinda tassels with brick stitch, but thought I’d give these ago, my initial thought was that looks easy as, but on watching a couple of videos so far there are different ways of doing this, each with their own tips & tricks, but I think I’ll be coming back to see yours! Tena koe no Aotearoa (means thank you from New Zealand)
Love this tutorial. 😁. Have made so many tassel bead earrings but yours gives me that warm fuzzy feeling in how you secure and tie all the ends up.. Just gorgeous... Have followed and look forward to more. 👍🙌💕
Practice makes perfect! I've made so many of these I can't even count haha. But you best believe the first few pairs took Forever and looked like a hot mess haha
These are such good instructions! I just subbed and will be watching more to get some advice as I've just gotten back into beading and jewelry making 🙌 thank you!
These are so cute! I was going to ask on your IG if you were selling just the tutorial, but here it is! Free! Thank you! PS - I met you a bunch of years ago at the Hawaii SoftFlex bead show, you bought Halloween beads from me. ❤️
How big is the tassel cap/cone? Very pretty. And thank you for the tutorial. When do you get more in your shop of the caps. It looks like most are sold out.
I love this tutorial! What kind of material do you use to work on and place the beads on? I used felt and it sticks to the needle and so difficult to get the beads from. Thank you!
Yes an eye pin will totally work. Just be mindful of the opening. YOur thread may slip through. But its no biggy just push it away from the opening when you come to the top and you will be fine.
I prefer Hypo Cement over e6000. It has a tiny needle applicator and dries clear. E600 is great for gluing things onto other things but it gets kinda clumpy when it comes to thread. But since this is going to be hidden by the cone, GO FOR IT!
If you tie the knots correctly and very tight you should be ok. You can also use any glue that you are comfortable with. I love hypo cement because it only smells for a moment, dries clear and does not stick to your skin like super glue. Using it outside or in a well ventilated room is a must.
I would not. Fireline is more ridged and stuff and your fringe will not be flowy. Here is my favorite thread for soft flowing fringe. www.capitalcitybeads.com/stringing-material/thread/nymo/
Yes. But eye pins have a slight opening and your thread could slip out. As long as you are aware and keep your thread away from the opening you will be ok. Just glue glue glue so the threads can't move into that opening and fall out. This is why I prefer a fully closed wire wrap
@capitalcitybeads yes I just watched your video but I was stumped and had the same question as well. Do you continue to decrease with the other strands until you've done the last strand? Awesome work and great instructions by the way. 😊
For this technique you don't need any crimps! No need for extra metal or weight. Crimps can also cut into thread and cause breakage. Crimps are great with stainless steal beading wire such as soft flex! ❤️
Hello! The cones in this video are available on my website www.capitalcitybeads.com under Findings. But any cone will work it’s up to you ans your design. The bigger the cone the more strands you’ll have to bead to fill it up!
Thank you. Best video I've seen on how to make these earrings. Precise and to the point!
Thank you so much! I really appreciate that!
I have seen these earrings on Pinterest and searched for how to make them and then found you. Great instructions thank you so much they really are gorgeous I have subbed too xx
That same thing happened to me. I am so glad I found this tutorial.
Such a clear & easy video to learn from, I do the other kinda tassels with brick stitch, but thought I’d give these ago, my initial thought was that looks easy as, but on watching a couple of videos so far there are different ways of doing this, each with their own tips & tricks, but I think I’ll be coming back to see yours!
Tena koe no Aotearoa (means thank you from New Zealand)
Finally! An awesome tutorial for this earring style ❤
Love this tutorial. 😁. Have made so many tassel bead earrings but yours gives me that warm fuzzy feeling in how you secure and tie all the ends up.. Just gorgeous... Have followed and look forward to more. 👍🙌💕
Thank you so much!
Awesome and easy to do once you get the basics down. Thanks for sharing
You're so welcome! Enjoy!
You make it look so easy!
Practice makes perfect! I've made so many of these I can't even count haha. But you best believe the first few pairs took Forever and looked like a hot mess haha
Great instructions! TFS!
You are so welcome!
Thank you so much, great tutorial.
Love this! Your instructions are easy to follow and clearly explained. Thanks!
Yay!! Thank you so much! Have fun!!
Loved the demo!
Thank you!
I just subscribed to your channel. Thank you for the lesson.
Thank you so much! You are welcome! I'm so glad you enjoyed it!
Awesome easy tutorial to follow! Thank you 😊 💓
Thank you. Beautiful colors
Thank you so much!
Absolutely beautiful ❤❤❤
Beautiful! Thanks for the tips can’t wait to try to make them!!!
Yay!! Thank you!
Excellent instructor
Thank you so much!!
These are such good instructions! I just subbed and will be watching more to get some advice as I've just gotten back into beading and jewelry making 🙌 thank you!
Yay! Im so glad you like them! You are so welcome.
These are so cute! I was going to ask on your IG if you were selling just the tutorial, but here it is! Free! Thank you! PS - I met you a bunch of years ago at the Hawaii SoftFlex bead show, you bought Halloween beads from me. ❤️
OMG!!!! I cant believe you remember me!!! I totally LOVE your beads! I will find you on IG!
Amazing! I can’t wait to try your way.
Love this tassel!
Thank you!!
@CapitalCityBeads. What is the cone size for this earring? Thank you in advance ❤️
How big is the tassel cap/cone? Very pretty. And thank you for the tutorial. When do you get more in your shop of the caps. It looks like most are sold out.
Any come about 4mm-8mm would work. The ones I used in this video are no longer available.
I love this tutorial! What kind of material do you use to work on and place the beads on? I used felt and it sticks to the needle and so difficult to get the beads from. Thank you!
www.capitalcitybeads.com/bead-mat.html
Thank you Excellent video!! 🙂
Thank you!!!
Beautiful earrings and easy looking tutorial. Thank you! What string did you use?
Hello! I am using Nymo size B
www.capitalcitybeads.com/stringing-material/thread/nymo/
These are so cute ☺️
I love these!
Thank you!
Awesome! I love this ty
You are so welcome!!
Is there a list of supplies to make these? I went to your site and don't see it on there
Thanks so beautiful !!
Beautiful earrings. Thank you for sharing What kind of thread are you using?
Nylon thread.
I am using Nymo Size B Thread. Here is a link! www.capitalcitybeads.com/stringing-material/thread/nymo/
If I have no wire would an eye pin work?
Yes an eye pin will totally work. Just be mindful of the opening. YOur thread may slip through. But its no biggy just push it away from the opening when you come to the top and you will be fine.
Would 24 gauge wire work?
Beautiful ❤️ can u tell me please which
Tread do u use? 😊
Hello! I am using Nymo. Here is a link to all of the supplies. www.capitalcitybeads.com/tutorials/earrings/rustic-brass/
you took whole length of thread enough for 8 lines,at the beginning itself? am i correct?
One whole piece of thread for one earring.
@@Beadsmakemehappy Thank you🌿
Which mm thread you are using so that it doesn't break
www.capitalcitybeads.com/copy-of-size-b-nymo-bobbin-golden-1-spool.html
Thank you for sharing with us........ Questions, what size cone is this? Can I use E6000 glue?
E6000 is fantastic for jewellery and polymer clay. I use it all the time. 💚🇦🇺
I prefer Hypo Cement over e6000. It has a tiny needle applicator and dries clear. E600 is great for gluing things onto other things but it gets kinda clumpy when it comes to thread. But since this is going to be hidden by the cone, GO FOR IT!
What are those bead colors? 😍
www.capitalcitybeads.com/tutorials/earrings/
Can we skip the glue. I hate having this type of glue in my home and the smell is awful when using. Will it fall apart without glue?
If you tie the knots correctly and very tight you should be ok. You can also use any glue that you are comfortable with. I love hypo cement because it only smells for a moment, dries clear and does not stick to your skin like super glue. Using it outside or in a well ventilated room is a must.
any tips on keep thread from tangling?
Practice! Moving slowly and having a very clear workspace so it doesn't get caught on anything while you work.
Can we buy that wire in beginning?
www.capitalcitybeads.com/wire/craft-wire/
What's the name of the needle? You did an amazing job. Love them 💕
I used our Big Eye Needle. It's super easy to thread.
Can I use fire line?
I would not. Fireline is more ridged and stuff and your fringe will not be flowy.
Here is my favorite thread for soft flowing fringe.
www.capitalcitybeads.com/stringing-material/thread/nymo/
Can you use long eye pins? Instead of wire?
Yes. But eye pins have a slight opening and your thread could slip out. As long as you are aware and keep your thread away from the opening you will be ok. Just glue glue glue so the threads can't move into that opening and fall out. This is why I prefer a fully closed wire wrap
What size beads are used here please!
Hello! These are size 11/0 Czech glass beads. www.capitalcitybeads.com/seed-beads/czech-glass/size-11-0/
Great tutorial thank you
you are so welcome!!
Just one question... Why do you decrease 1 bead for the first and second colour.... In the 2nd tassel onwards.? 😁
I start with my longest tassel first so I can set my max length. I decrease one or two beads as I go to achieve a tapered look.
@@Beadsmakemehappy and is this just for the second string of beads , or do you continue to decrease with the other strings?
@capitalcitybeads yes I just watched your video but I was stumped and had the same question as well. Do you continue to decrease with the other strands until you've done the last strand? Awesome work and great instructions by the way. 😊
What gauge wire is best for wrap…?
22ga or 20ga. Is best. 24ga might be a little flimsy for this design
Where can I get the needle you are using
All of the supplies in my videos can be found at www.capitalcitybeads.com ♥️
Thank you
You're welcome!
making tassel with crimp at end
For this technique you don't need any crimps! No need for extra metal or weight. Crimps can also cut into thread and cause breakage. Crimps are great with stainless steal beading wire such as soft flex! ❤️
What size Nymo thread?
Nymo Size B is my favorite size www.capitalcitybeads.com/stringing-material/thread/nymo/
Hello - how do you know which size cone to use? Thank you :) x
Hello! The cones in this video are available on my website www.capitalcitybeads.com under Findings. But any cone will work it’s up to you ans your design. The bigger the cone the more strands you’ll have to bead to fill it up!
@@Beadsmakemehappy Thank you for replying ☺️
What size needle is this?
You can use a size 10 or a big eye.