As a 66 year old recently started hobby welder I have no idea why I watched this but having seen it to the end I feel like it's an essential part of my learning how to weld. Great job.
Thank you for your very detailed and thorough explanation of exactly what you have going on in this weld. Many of us, young or old (60) are youtube learning here. Your covering so many basics that other good welding channels take for granted is much appreciated. Although I foresee never having to face a welding test and not doing anything but hobby welding, I am learning a lot from your channel. Now its time to head out to the shop to practice.
I usually take a soapstone and mark it about a 1/16" from the edge of the bevel and use it as a guideline for the edge of my cap pass. I try to avoid using a grind line since if you accidentally go to far over it will fail visual.
As a long time viewer from the beginning I would love if you guys could attempt to mig weld (RMD or stt) a 8” piece of schedule 10 stainless. Miller says it can be done in 1 pass with RMD. But other than them saying that I’ve yet to find video of anybody trying it
Thank you for this video. Great detail, simple to the point explanation, get to it. Hello from Detroit. I'm doing my 1G work tonight on 2"x6"x1/4" Carbon Steel square groove weld 6010 root 7018 cover.
I appreciate Vloggers/Instructors like this for showing the actual travel speed. Other vloggers did some fast forward which is not helpful fur newbies like me. I hope in the upcoming videos they will always include the rod angle. 🤭
کارت بیسته 👌 واقعا عالی توضیح دادی آدم لذت میبره میتونم بگم سی بار این ویدیو رو دیدم .....من برای تست جوشکاری چند روز پیش امتحان دادم ولی خب با بهانه های عجیبی رد کردن ....ولی این ویدیو باعث شد خیلی چیزها یاد بگیرم و حتما استفاده میکنم تو تمرینات 💪👍👍👌موفق باشی مرد جوان
hi.subscriber here. I am a welding instructor too. I am starting to upload videos teaching some weld stuff as you do. But some of my viewers keep on telling me to attach a running plate to my workpiece coz I usually do the same thing as your preparation in our practice. I want to clarify this by asking you a question about when to use a running plate when welding like this. Thank you for your response and keep the fire burning.
should have shown us what the root pass looks like before grinding... or each and every pass... and maybe after grinding... that way we know what it should look like and what to shoot for.
Thanks , you gave a lot of great tips. The prep work, tie in and a few other things you mentioned helped and made a huge difference in my class work 👍💯
Nice video, I would like to see a D1.1 one inch thick plate with a landing strip. 7018 1/8 rod from root to cap running stringers then a bend test. Thanks fellas. 👍
before attempting a test, be sure that you are allowed to use grinding discs. some tests allow only wire wheels/cups because they don't remove material.
Really good video. The only suggestion I'd make is to see some additional close up when NOT welding (like you did at 15:40). Other than that was really informative.
Nice video, helps me see closer how you move the rod and control your hand. 2 thumbs up! I'm learning bro... thanks! I'll check out more of your videos and see if you cover 2G and more. ^_^
A wire wheel will remove metal. I had a burn out on my vertical plate first coupon today. I put my mig gun away real fast. Got on the six inch grinder, with wire wheel, held that sucker on the," grape", an it disappeared. I waited for the plate to further cool. Then continued on like normal. Bent all plates. Two more years of all position welder for this guy.
Thanks bro you video coming in clutch cause I’m over here practicing in school my teacher doesn’t teach for shit and I’m over raging wondering what I’m doing wrong lol
Can you guys make a video of inconel and 309 stainless stick welding to this same plate. Might help some people. I just toom 9 plate test. 3 carbon, 3 309, and 3 inconel. Had no clue how to weld the 309 to carbon or the inconel. I did manage to pass all 18 bends though.
You used a grinder after the root pass, but a wire wheel after all the other passes. Is 6010 slag too difficult to remove with a wire wheel, or is there a specific reason to grind the root pass?
Mark Lowry to ensure complete fusion on whatever you’re welding on. If you run a 6010 rod for a root the edges are rolled up and not tied in the base metal on the side you welded on, and just welding over that isn’t guaranteed to burn all the way in. Could leave spots of slag or lack of fusion. Grinding helps reduce any of that from happening
Thank you, I got ideas for my test but there is something I dont understand: your root pass was 100 amps becuase is a 6010 1/8, your first pass was 125 amps becuase is a 7018 1/8, and when the plate is already warm your second pass was 135 amps, higher than the first pass? it is not lower for the heat effect, I mean second pass 110 amps?
Can y’all do a 2G weld with Tig on 1/8 plate. Root, hot, fill and cap? I’m currently in college for GTAW and I have a weld test coming up for it. Could really use pointers.
👇WeldTube Store👇
www.weldlife.com
As a 66 year old recently started hobby welder I have no idea why I watched this but having seen it to the end I feel like it's an essential part of my learning how to weld. Great job.
Thank you for your very detailed and thorough explanation of exactly what you have going on in this weld. Many of us, young or old (60) are youtube learning here. Your covering so many basics that other good welding channels take for granted is much appreciated.
Although I foresee never having to face a welding test and not doing anything but hobby welding, I am learning a lot from your channel.
Now its time to head out to the shop to practice.
Thank so much this video helps on me so much . I a woman trained to be a welder . Thanks for the tips. ❤️
Great video Mikey. Awesome tip about the grind line. Abraham taught me that when we were over there in October. Stay safe out there Brother.
I usually take a soapstone and mark it about a 1/16" from the edge of the bevel and use it as a guideline for the edge of my cap pass. I try to avoid using a grind line since if you accidentally go to far over it will fail visual.
As a long time viewer from the beginning I would love if you guys could attempt to mig weld (RMD or stt) a 8” piece of schedule 10 stainless. Miller says it can be done in 1 pass with RMD. But other than them saying that I’ve yet to find video of anybody trying it
I’m taking my cwb test tomorrow and I think I may barf out my guts from anxiety thank you for these videos wish me luck youse guyses
Thank you for this video. Great detail, simple to the point explanation, get to it. Hello from Detroit. I'm doing my 1G work tonight on 2"x6"x1/4" Carbon Steel square groove weld 6010 root 7018 cover.
I wish my instructor taught like you do
Yo Mikey, awesome video brother 👊🏻👊🏻
I appreciate Vloggers/Instructors like this for showing the actual travel speed. Other vloggers did some fast forward which is not helpful fur newbies like me. I hope in the upcoming videos they will always include the rod angle. 🤭
thank you, best video I found to learn! please do more instructional videos!
Thanks for this video, this is really gonna help me when It's time for me to take my 1g test in welding school
It helps a lot but I still fail at it good luck
Glenn Shanks I passed it haha
Got this test tomorrow at school, video helped me fix my root problem
کارت بیسته 👌 واقعا عالی توضیح دادی آدم لذت میبره میتونم بگم سی بار این ویدیو رو دیدم .....من برای تست جوشکاری چند روز پیش امتحان دادم ولی خب با بهانه های عجیبی رد کردن ....ولی این ویدیو باعث شد خیلی چیزها یاد بگیرم و حتما استفاده میکنم تو تمرینات 💪👍👍👌موفق باشی مرد جوان
Thanks, I've learned so much from this video.
hi.subscriber here. I am a welding instructor too. I am starting to upload videos teaching some weld stuff as you do. But some of my viewers keep on telling me to attach a running plate to my workpiece coz I usually do the same thing as your preparation in our practice. I want to clarify this by asking you a question about when to use a running plate when welding like this. Thank you for your response and keep the fire burning.
Great video thanks
should have shown us what the root pass looks like before grinding... or each and every pass... and maybe after grinding... that way we know what it should look like and what to shoot for.
George Simpson I was thinking the same thing
thank you for this video.its a great help for the aspiring welders.
Thanks brother it really helps to improve our welding at workshops
Dude so excited because we start stick tomorrow morning!!!!!!
Another great video, Mike! Your instruction really comes across well. Thanks!!
Thanks , you gave a lot of great tips. The prep work, tie in and a few other things you mentioned helped and made a huge difference in my class work 👍💯
Nice video, I would like to see a D1.1 one inch thick plate with a landing strip. 7018 1/8 rod from root to cap running stringers then a bend test. Thanks fellas. 👍
Great video. Thanks and keep up the amazing work guys.
Out of the dozens of weld tests I've done, grinding the test piece was an automatic fail. I also passed those said weld tests.
Tim Snake People in welding school usually have to prep their own plates.
Exactly that's what happens where I'm from no grinders period also no 6010 for structural just low hydrogen only
@@carof08 this is t a structural test … it’s a simulated pipe … but plate is cheaper
Nice good job
Awesome vid!! I start learning stick tomorrow night in college class. Had a quick question. Do you guys offer AWS testing there?
Jason Schagt all colleges do.
before attempting a test, be sure that you are allowed to use grinding discs.
some tests allow only wire wheels/cups because they don't remove material.
Really good video. The only suggestion I'd make is to see some additional close up when NOT welding (like you did at 15:40). Other than that was really informative.
Terimakasih ilmunya i'm for Indonesia student welder 🤘
Did you guys have an recommendation amps for root pass?
Helped quite a lot.
Nice video, helps me see closer how you move the rod and control your hand. 2 thumbs up! I'm learning bro... thanks! I'll check out more of your videos and see if you cover 2G and more. ^_^
Wtf bro I literally learning the 1g tomorrow. Aye thanks now Imma study up with this video 😂💀
did you pass ?
Hell yeah aced my bend test
Well I bend my 4g
@@ruben_7364 sweet
This helped out a lot thank you!
Sana all! 😭
That cuhh’s helmet reps trokiando 💯
haha great video. I bet the high school teacher skipped the part where u were using the grinder one-handed;)
Thanks sir I like the way you show
Thank you. Very useful video.
this was great. It’d be cool to see a 3g 7018 video as well
Grinded is to ground as splatter is to spatter. My Wife (an English teacher) keeps bugging me about it. Loved the vid, keep it up!
Great man..great job
Nice welding keep it up
This helps alot im in v groove class rn and definitely helped me
This nice video . I hope you make you video because i need learn welding in class .👌👌✌️👍
watching again... damn. Great work.
That "1/8" inch 7018 looks like a "5/35" in this guys hands... dang....
I love the video can you do more stick welding videos on pipe
Watching from phillipines..
Nice bro 😎😎 greetings from Chile 🇨🇱
I am indian nice video
Nice video my man. I know you mentioned towards the end on how long you waited before CAPPING it, but how long do you wait before each pass? Thanks!
Awesome bro
Nice work mr welder
I test this on thursday im ready
He just asked for the appropriate drawer to operate the machine
Good job👍👍
Double lens filter or something to see actual welding. Did you grind clean after every pass ?
Que buen video muchas gracias. Quiero una careta para soldar como esa
Hello dear how are you my name is Farrukh Iqbal from Pakistan I am work as a 3G welder Smaw Process at Ship Yard your work is good
This is awesome do yall think yall could do a 2g v groove
so on the second field are you running the first bead with the zig zag method then dragging with the second bead
Most of the welders that i know ended up wearing glasses so am wondering if it affects the eye vision on the long run
The cwb dosnt allow anything that removes metal on tests... any tips for only being aloud a wire wheel
File that shit lol
A wire wheel will remove metal.
I had a burn out on my vertical plate first coupon today.
I put my mig gun away real fast.
Got on the six inch grinder, with wire wheel, held that sucker on the," grape", an it disappeared.
I waited for the plate to further cool.
Then continued on like normal.
Bent all plates.
Two more years of all position welder for this guy.
Awesome 😃
I have the same exact welder and I cannot figure out the voltage settings for stick mine is set at 86.6 Volts
Great video y’all
Magnífico trabalho!!!
Good shit homie
I have a 1G test today, this video really helped out
Video for schoolchildren? Welds in the ceiling position.
Hypnotizing.
Thanks bro you video coming in clutch cause I’m over here practicing in school my teacher doesn’t teach for shit and I’m over raging wondering what I’m doing wrong lol
@Leonel Puga lmao what school do you go to,😂
How many times root pass with 7018?
Great video do a 2g now
Can you guys make a video of inconel and 309 stainless stick welding to this same plate. Might help some people. I just toom 9 plate test. 3 carbon, 3 309, and 3 inconel. Had no clue how to weld the 309 to carbon or the inconel. I did manage to pass all 18 bends though.
Nice bro🤩
Tamale made the root😂
What happens if you do a 7018 open root? Or use only one type of electrode on it?
Hi I am just learning stick welding as a hobby, why do you leave a gap between the plates instead of having them touching at the start?
You used a grinder after the root pass, but a wire wheel after all the other passes. Is 6010 slag too difficult to remove with a wire wheel, or is there a specific reason to grind the root pass?
6010 doesn't have flux on it so there is really no need for a wire wheel other then to make it look pretty, all 60 series rods have no flux.
TherealBeaston there is definitely flux on every stick rod lol and the 60 is the tensile strength not the flux composition.
Mark Lowry to ensure complete fusion on whatever you’re welding on. If you run a 6010 rod for a root the edges are rolled up and not tied in the base metal on the side you welded on, and just welding over that isn’t guaranteed to burn all the way in. Could leave spots of slag or lack of fusion. Grinding helps reduce any of that from happening
@@joeboyle8987 -- Makes sense. Thanks.
Thank you, I got ideas for my test but there is something I dont understand: your root pass was 100 amps becuase is a 6010 1/8, your first pass was 125 amps becuase is a 7018 1/8, and when the plate is already warm your second pass was 135 amps, higher than the first pass? it is not lower for the heat effect, I mean second pass 110 amps?
Can y’all do a 2G weld with Tig on 1/8 plate. Root, hot, fill and cap? I’m currently in college for GTAW and I have a weld test coming up for it. Could really use pointers.
I mean 1/2 inch plate.
And a 5/32 root opening
This on a 3/8" plate that looks thicker, with similar root opening: ruclips.net/video/x8yAdlDcHv4/видео.html
Nice stringer cap
Can you do a step by step 3g 1’’ unlimited weld test
Blueprint test tomorrow. And then finish 2F after the test.
Was 70A used for the root or just the tacks? Seams a bit low to bust through for full pen. ??
Seems to be too much heat for my taste. There's spatter everywhere. I'm 67 and been Welding Profesionally since I graduated HS in 1972.
that's what I was thinking.. he's keyholing pretty large, but he held 'er.
Добрый день, можно узнать что за маска такая, первый раз вижу ? Благо Дарю 🙏👍🤝
Subtítulos en español porfavor
I’m practicing this in school rn it’s pretty hard to start it cause u have to make the bottom look nice
im practicing in school as well, any tips to get the penetration down?
@@joshmoya694 yea I liked keeping my plate tight so all I have to do is drag it or u could step it much easier
Where's the root , why u didn't clean up the weld before presenting it ?
Not seeing the puddle in the filler passes
Seems alright to me...
Only do those weaves on 2 passes to much heat do stringers after that
135...show some glass if you get a chance thankx
Nice weld bro 💵💵💵