You two are just unbelievable!! I love that Lance never gives up. He has a great work attitude. Just keeps going and going and going. I can’t wait to see what is going to happen next.
Ally and Lance Link Lot I can't wait to see this video too anxious but I will be in Church tonight hoping to see it when I get home. Have a wonderful Sunday. Laterz Leland
Great to see lance has all the tools to get this van into reliable condition so the party in beautiful isolation stays fun instead of dramatic disaster! The process to watch is interesting and fun✌️❤️🇬🇧
We all have a first time, great to see this van is getting some attention before you travel, a fun greasy learning opportunity! Much love to you both ✌️❤️🇬🇧
Oil pan gaskets are such a pain in the ass. Per Ford you have to pull the motor and flip it upside down to let it cure correctly. Needless to say I’m in the “rather keep adding oil club” lol
Bout to pull the 7.3 idi engine out of my 91 econoline school bus. After buying and doing a whole new cooling system with new parts, turns out it has a cracked cylinder so after filling up the radiator all the water went to the oil pan. Over that damn engine. I’d like to swap a 4bt Cummins but a bit pricey, so if I save we will see, might just put a 350 Chevy in it and just get it running for now. Thanks for the vid, wishing I could find a girl to help me with my mechanical problems and be so supportive lol you guys are great, Zach from so cal
Dang sounds like you’ve had a rough time! You could look into doing a 6.0l swap there’s a lot of information and parts for them not to mention they make good power.
@@AllyandLance ya its definitely been a process lol, ehh i could just not a real big fan of ford motors lol especially after what ive been thru, thinking im just gunna wait and save up for a 4bt cummins and get adapter plate for the e40d
when you went to pull the engine i notice you modified the chain going over the top of the hoist to have more room, any chance you could explain how you did that ? thanks
Hey I know it’s a long time ago but I am just sundering if you guys replaced your engine wiring harness when doing your engine repairs? I am needing to replace mine on my 7.3 van and am having a hard time finding a van specific one, I just wandered if you might have some knowledge on this subject. Thanks for your time
I cant believe that engine came out through the front. I would install new glow plugs and valve gasket/harnesses. Also make sure to only use genuine ford motorcraft parts, all the aftermarket stuff will fail.
Ally So the Little Orange Flat bed Truck comes in handy for moving the Van about in order to work on it. Coolio Go Lance Go! Wow wee Ally a 7 year Apprenticeship wow! You will be a Pro-Fetch-chin-al. ha ha Lance I'm old and slow but I would think if you removed the Fan and pulley then perhaps, maybe, possibly the Motor may Gain room for better Maneuvering. Ally I just Love the Orange Avenger Truck to the Rescue... Lance new thinking too Late but setting the Motor on a tire in back of the truck bed makes it stay up right nicely. Old People think they know everything stupid Old people Lol Shew wee I can Breathe again.. Great job Lance Great job Ally the Apprentice .Loved it Laterz Leland
Hi Do you need some great lighting for your car to help you better driving, off-road. We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!
She is 1000% perfect no diet needed it kills me how people constantly force their perspective of "beauty" onto others. Lo lux I bet you're the type who likes broomstick women with no curves 🤔... You are missing out man!
7.3 is my favorite diesel. They’re tight in the vans but worth it! I just turned my bosses up to 500hp. Have fun!
Ohhhh that sounds niceee
You two are just unbelievable!! I love that Lance never gives up. He has a great work attitude. Just keeps going and going and going. I can’t wait to see what is going to happen next.
Thank you Adam!! working hard :))
Ally and Lance Link Lot I can't wait to see this video too anxious but I will be in Church tonight hoping to see it when I get home. Have a wonderful Sunday. Laterz Leland
Great to see lance has all the tools to get this van into reliable condition so the party in beautiful isolation stays fun instead of dramatic disaster! The process to watch is interesting and fun✌️❤️🇬🇧
hes a personal brain toolbox hahaha
We all have a first time, great to see this van is getting some attention before you travel, a fun greasy learning opportunity! Much love to you both ✌️❤️🇬🇧
Definetly some well needed attention!!
Getting ready to do the same thing in my e450 bus. Unfortunately I need a new motor. Thanks for the vid👍🏼👍🏼
My gosh, what a project you have started. Ally do nt you wonder if your hands will ever get clean again 😢. You are a real power-girl!
Haha thankfully a little dawn dish soap and a few days did the job! Haha
Oh my gosh I want that bumber for my van. But then I'm have to go push something over or bump into stuff for fun. lololol
Super awesome! and' hoping all is reasonably refreshable! also Sweet tool box!💪🇺🇲
Thank you!! Were hoping so too.
Oil pan gaskets are such a pain in the ass. Per Ford you have to pull the motor and flip it upside down to let it cure correctly. Needless to say I’m in the “rather keep adding oil club” lol
Lol we've been there 😂
I don’t know if you noticed during editing but the ipr solenoid was on there and got taken out with the filter housing. Nice work with a tough job.
We had found it but thats Awesome to know that that's how it happened! Thank you so much we didn't know that 🙌🏻
GREAT JOB !!!!
Bout to pull the 7.3 idi engine out of my 91 econoline school bus. After buying and doing a whole new cooling system with new parts, turns out it has a cracked cylinder so after filling up the radiator all the water went to the oil pan. Over that damn engine. I’d like to swap a 4bt Cummins but a bit pricey, so if I save we will see, might just put a 350 Chevy in it and just get it running for now. Thanks for the vid, wishing I could find a girl to help me with my mechanical problems and be so supportive lol you guys are great, Zach from so cal
Dang sounds like you’ve had a rough time! You could look into doing a 6.0l swap there’s a lot of information and parts for them not to mention they make good power.
@@AllyandLance ya its definitely been a process lol, ehh i could just not a real big fan of ford motors lol especially after what ive been thru, thinking im just gunna wait and save up for a 4bt cummins and get adapter plate for the e40d
when you went to pull the engine i notice you modified the chain going over the top of the hoist to have more room, any chance you could explain how you did that ? thanks
Why not a 6.0. I hear if you upgrade the oil cooler and Egr cooler and swap the coolant it will run pretty decent..
@3:10 REAL LIFE! had me laughing Lance.
Hey I know it’s a long time ago but I am just sundering if you guys replaced your engine wiring harness when doing your engine repairs? I am needing to replace mine on my 7.3 van and am having a hard time finding a van specific one, I just wandered if you might have some knowledge on this subject. Thanks for your time
I cant believe that engine came out through the front. I would install new glow plugs and valve gasket/harnesses. Also make sure to only use genuine ford motorcraft parts, all the aftermarket stuff will fail.
Done done and will do 😊
Just replaced my IPR, for the second time. I was able to pick one up from advance auto parts. I can get part # if need be.
Awesome! We will reach out if need be. I think lance found it though!
Ally So the Little Orange Flat bed Truck comes in handy for moving the Van about in order to work on it. Coolio Go Lance Go! Wow wee Ally a 7 year Apprenticeship wow! You will be a Pro-Fetch-chin-al. ha ha Lance I'm old and slow but I would think if you removed the Fan and pulley then perhaps, maybe, possibly the Motor may Gain room for better Maneuvering. Ally I just Love the Orange Avenger Truck to the Rescue... Lance new thinking too Late but setting the Motor on a tire in back of the truck bed makes it stay up right nicely. Old People think they know everything stupid Old people Lol Shew wee I can Breathe again.. Great job Lance Great job Ally the Apprentice .Loved it Laterz Leland
hahaha the avenger truck!! There its name... that 7 years went by QUICK! Thanks for the tips Leland!
✌😎✌
Should've lifted the body from the frame.
Hi Do you need some great lighting for your car to help you better driving, off-road. We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!
White smoke and having to use ether to start... bad fuel system. Bummer
Ally go one a diet
I'm a 1000 horse power machine my love 💚 no diet necessary :) also it's spelled *on*
@@AllyandLance one extra e won’t change you being fat
She is 1000% perfect no diet needed it kills me how people constantly force their perspective of "beauty" onto others. Lo lux I bet you're the type who likes broomstick women with no curves 🤔... You are missing out man!
Bro what. Why would she need a diet?
clown
You could have done injectors and glow plugs and saved yourself from pulling an engine...Trump 2024 FJB