@@ValueYourselfInc. You're welcome!! You should do fine my guy. That's a good business to start. Brakes are always needed. Good luck and wish the best on your venture 👍
Nice video...thanks for the upload. the thing I always find puzzling, is the application of grease on the slots where the pad tabs slide. I have done it with, and without grease. my common sense tells me that the grease is going to attract the brake dust and road dirt.
Thank you i appreciate it.Yes sir I have to grease/no grease I find it to help with the removal after all the road grime salt and such. So I usually us a little, thanks for watching the video and the feed back!! I hope it was helpful 👍 🙂
Take a hammer 🔨 and hit the neck of the wrench. Hit the wrench and hammer neck the direction to take it off. I'll make a short in the next hour for this question. Awesome I hope it helps.
Great video man.. My Malibu need rotors and pads. I've never done a brake job but watching this video I know I can do it..
That's wasup thank you I appreciate it. I know you can to I hope you are successful on the repair 👌🏻
Thank you!!! I’m going to try under a mechanics supervision to see if I can do it. Hoping to build a side business just doing brakes, lol.
@@ValueYourselfInc. You're welcome!! You should do fine my guy. That's a good business to start. Brakes are always needed. Good luck and wish the best on your venture 👍
Nice video...thanks for the upload. the thing I always find puzzling, is the application of grease on the slots where the pad tabs slide. I have done it with, and without grease. my common sense tells me that the grease is going to attract the brake dust and road dirt.
Thank you i appreciate it.Yes sir I have to grease/no grease I find it to help with the removal after all the road grime salt and such. So I usually us a little, thanks for watching the video and the feed back!! I hope it was helpful 👍 🙂
You make it look easy
Great job thank you
@@moniquesapp9319 Thank you!! You're welcome glad the video helped you!!
I can still use a c clamp to reset the caliper with these right??
@@fearfulharmony6105 Yes you can
Thank you!
@@RelefordResources You're welcome!! I'm glad the video helped you 🙏🏻💯
Thx for the video
Your welcome my friend glad it helped 👍
Thank you
You're welcome glad I could help 👌
you don’t have to bleed the brakes ?
If your only replacing pads you shouldn't have to bleed the brakes. Unless the felt or feel spongy.
@@equalizedsoundautorepair48thank you boss
another question i’m stuck with just a 14 mm wrench and it’s hard af to take off the caliper any tips on removing the bolts easier
Take a hammer 🔨 and hit the neck of the wrench. Hit the wrench and hammer neck the direction to take it off. I'll make a short in the next hour for this question. Awesome I hope it helps.
I just posted a video to help you out. I hope you are successful and it helps.