The blue eyes you see at first is just a protective film. After removing this film and when the robot begins to move, its eyes turn from yellow to blue.
@@marwangory3834 First of all, for the robot to work properly, you need fresh batteries both in the robot and in the remote control. I noticed that if the batteries are used, you can't get it to work. Put the robot on the ground, turn it on. The eyes are green indicating that it is initializing. Immediately afterwards, the eyes change to yellow. When you send the first command to the robot, the eyes change to blue. Check to point the remote control at the robot all the time and do not exceed 1m of distance between the remote control and the robot.
Disculpe a usted no le llegó el instructivo donde se resetea?
Sorry, but I don't understand your question. There is no way to reset the robot and why should a reset be done.
No lo se programar me ayudan en español
No lo se programar me ayudan en español
how do you turn his eyes blue
The blue eyes you see at first is just a protective film. After removing this film and when the robot begins to move, its eyes turn from yellow to blue.
When i try to move him he dosent move
@@marwangory3834 First of all, for the robot to work properly, you need fresh batteries both in the robot and in the remote control. I noticed that if the batteries are used, you can't get it to work. Put the robot on the ground, turn it on. The eyes are green indicating that it is initializing. Immediately afterwards, the eyes change to yellow. When you send the first command to the robot, the eyes change to blue. Check to point the remote control at the robot all the time and do not exceed 1m of distance between the remote control and the robot.
Whats the film
@@Meisechmy robot eyes r not turning to green is there any other settings... batteries are new for both robot and remote
Valor comercial del robot?
Around 60€. Too expensive in my opinion
Está Bara 246 en Walmart está en promoción su precio normal es de 1300
How to unlock robo up
There is nothing to unlock. Simply connect the Robot and use your RC.
You should hold the follow me button to follow you and not pressing the button but even when hold the button it will fall down😢😢😔
However. I find the Macrobot to be more responsive to commands than the YCOO Neo
Failed 😂