DIY Honda Fit LED Door Sill Install

Поделиться
HTML-код
  • Опубликовано: 5 сен 2024
  • Installed my LED door sill on my Honda Fit. Follow these same steps on the driver side and tap the wire to the same dome light wires.
    Pink + positive source and Blue is the - negative (ground). I highly suggest you unplug the wire harness for the pink and blue dome light wires before you try tapping wires to them.
    Product Recommondation: www.amazon.com...
    I can be reached via:
    Facebook: / diycarmodz
    Instagram: / diycarmodz
    Google+: plus.google.co...
    Email: diycarmodify@gmail.com
    Mailing Address:
    DIYCarModz
    9051 Mira Mesa Blvd
    #262321
    San Diego, CA 92196

Комментарии • 98

  • @theeperfectimage50
    @theeperfectimage50 Год назад

    Nice video, picking some up in a couple of days. But plan on drilling through metal where the mounding goes over to hide the wire. Thanks for the information about the rear wires not being long enough and where to run the wires to the dope lights.

  • @Black3sr
    @Black3sr 11 лет назад

    Thanks for the DIY. Well done. I have Honda sills so will not be doing this but I am doing my door handles so this does help.

  • @DIYCarModz
    @DIYCarModz  11 лет назад

    I purchased the door sill on eBay. They do make them for all makes and model. Just search on their for door sill led for your car.

  • @pramodmutha9996
    @pramodmutha9996 3 года назад +1

    On ending you skip the how to connect wire in fuse box

  • @CruiseLawrence
    @CruiseLawrence 8 лет назад +1

    Thanks for the video. It sure is a lot of effort.

  • @Mrtravelfoodie
    @Mrtravelfoodie 11 лет назад

    Can you have a more detailed and clear picture of the fuse box area and where the wires go in exactly. I am not good with electricals, so I want to be sure when i do it. Thanks! :D

  • @TejasT27
    @TejasT27 10 лет назад +4

    Hardcore detailing... Thanks for the efforts u gave to make the video! Appreciate it :)

  • @Black3sr
    @Black3sr 11 лет назад

    I have a link to the guy in Japan I think that has done the door handles. I will try and take some as well. I just ordered the LEDs.
    I did the winkers in my mirrors a couple years ago. Again I have the link.

  • @DIYCarModz
    @DIYCarModz  11 лет назад

    Thanks and post up pics on the forum when you do the door handles. I've been thinking about doing that as well.
    My next project will be adding leds for the side mirrors.

  • @paramasivanpillai8629
    @paramasivanpillai8629 10 лет назад

    Thank you very much for the detailed video.

  • @7homas0wen
    @7homas0wen 4 года назад

    18:04 “the fit will be lit” indeed it will.

  • @gemunuwa
    @gemunuwa 9 лет назад

    Thanks for the detailed video

  • @elreparadorrd
    @elreparadorrd 6 лет назад

    Excelente video. lo instale y quedaron bien

  • @andrew21030
    @andrew21030 Год назад

    Do they still light up all these years later

  • @greeksalad4783
    @greeksalad4783 6 лет назад

    I just bought some door sills for my 2018 Honda Fit. The LED looks cool, but I decided to get the non-LED door sills.

  • @hmcsr
    @hmcsr 6 лет назад

    Don't mind me saying so, but you should invest on a head Camera. It will really work well for you. I'm installing some sills on my CHevy HHr 2008LT. Can't seem to find a power source that will turn on/off when the door closes. What should you suggest?

  • @kunal0509
    @kunal0509 5 лет назад

    Thx man....very good video

  • @DIYCarModz
    @DIYCarModz  11 лет назад

    You can get them off of eBay. Just search for your car model and keyword "door sill led". Example.. Honda Fit Door Sill Led. I purchased mine from eBay seller: homegreatstore

  • @pccdo9
    @pccdo9 8 лет назад

    Hello good day! Mu could say as empalmas cable behind the front? There is a cut in the video and do not know much about electronics, it can be a kind of crocodile? Regards, and thank you very much!

  • @TatzzmTatzz
    @TatzzmTatzz 6 лет назад

    Hey,man great video really like the way u explain everything I just needed help with the end it was so dark in video were you tap the two wire to please let me know I really appreciate it,dave

    • @DIYCarModz
      @DIYCarModz  6 лет назад

      check out my video on the Honda Fit Footwell LED installation. That one will show you how to access the fuse panel and and give you a more clear picture of where the dome light trigger wire is located.

  • @shadowking13X
    @shadowking13X 11 лет назад

    Good job thanks for the detailed video, what I was wanting to know where did you pick up the door sills and do they carry other models?

  • @DIYCarModz
    @DIYCarModz  11 лет назад

    check out my video on the Honda Fit Footwell LED installation. That one will show you how to access the fuse panel and and give you a more clear picture of where the dome light trigger wire is located.
    I will also send you a picture to your inbox.

  • @armancamarillo8902
    @armancamarillo8902 9 лет назад

    Hi..do u know how to install the promotion LED door catch plate for hyundai santa fe 2012 dm?or do you have a video?kindly share.tnx

  • @HouseOfDeus
    @HouseOfDeus 11 лет назад

    i have these and i have one question, can you clarify better were to and how to tap the wires into the fuse box?

  • @bobrob979
    @bobrob979 11 лет назад

    hey. nice vid. do you have HID installation for the fit ? it will be great if u made a video of it.

  • @ledmk2
    @ledmk2 10 лет назад

    Nice

  • @supermagicflyingmonkeyadve5681
    @supermagicflyingmonkeyadve5681 11 лет назад

    Great vid. Ill be doing this to my fit soon (I hope)
    Ive been looking on Ebay but cant find the door sil. Any chance you could post a link to where you bought it?

  • @jerviereyes3560
    @jerviereyes3560 5 лет назад

    where do i connect the wires the positive and negative in hinda civic fd TIA

  • @DIYCarModz
    @DIYCarModz  11 лет назад +1

    Hit me up if you run into problems installing it.

    • @Nobody-sn1kp
      @Nobody-sn1kp 5 лет назад

      DIY: Car Modz the wire , where u connect it ?

  • @zulkharnainali1442
    @zulkharnainali1442 3 года назад

    After installed all this will effect the alarm light

  • @mikecheung601
    @mikecheung601 8 лет назад

    hi, sorry , i wanna know where can i buy that blue socket?

  • @levierodriguez7784
    @levierodriguez7784 7 лет назад

    When the key is swithced off, will the light go off also even the doors are open? Mine is exactly like that , and i worry becauase the light wont go off even i press the door sensor when key is off. But when the key is on, the light functions properly, pls help me.

    • @DIYCarModz
      @DIYCarModz  7 лет назад

      Levie Rodriguez the light is suppose to stay on. It will turn off when you have all the doors closed and lock the car or at the same time the dome light fades out.

  • @jb33771
    @jb33771 8 лет назад

    where can i get the long wire and how can i know its the right one any tips????

  • @marbuckle311
    @marbuckle311 10 лет назад

    how do you disassemble the connection from the front door sill so you can wire the back door sill to it. you talk about it at 12:35, but just show the finished product. I have the same type of connections for my corolla but am stuck.

    • @DIYCarModz
      @DIYCarModz  10 лет назад

      You take a small flat head screw driver and push the 2 metal slot and you should be able to pull it apart. However, I remember it was difficult to combine the 2 positive and 2 negative wires back into the slot. You can just cut the connector and just solder/spice all wires together and just bypass the connector all together.

    • @marbuckle311
      @marbuckle311 10 лет назад

      DIY: Car Modz ok, i don't have the tools to solder so i will just use that connector. Also, At the end to complete the connection you tap the wire into the pink and blue wires. I have a 2014 corolla so obviously the wires are different. Do you know which colored wires I should tap into. I even tried calling a couple toyota dealers and they have no idea how. Cant find any info for this on the internet. Or do you have advice on how to locate the correct wires?

  • @TatzzmTatzz
    @TatzzmTatzz 6 лет назад

    Hey I was really hoping to hear from you were you tapped the pos n neg wires please let me know thanks Dave

    • @DIYCarModz
      @DIYCarModz  6 лет назад

      I'll have a video up today

  • @supermagicflyingmonkeyadve5681
    @supermagicflyingmonkeyadve5681 11 лет назад

    never mind. Found it. Had to go over to ebay.com was on .ca
    Thanks for the great video.

  • @hectorlozada2503
    @hectorlozada2503 3 года назад

    what site you get those

  • @alimajazz
    @alimajazz 6 лет назад

    so you just opted the most important part of connecting the wires, I came here to learn that only.

  • @federicoguba2730
    @federicoguba2730 6 лет назад

    where Can i connect my door sill for civic SI 2015 4 doors?

  • @malagiyawanna
    @malagiyawanna 9 лет назад

    can u tell me how to install honda vezel door sill? plz

  • @yuklunwong3918
    @yuklunwong3918 7 лет назад

    Hello, is the negative side (black wire) of the sill should be grounded to the car also connected to the blue wire in fuse box at the same time?

    • @DIYCarModz
      @DIYCarModz  7 лет назад

      Power and Ground goes tot he 2 wires I explain in this video. I believe the wires I'm tapping are negative switched.

  • @TatzzmTatzz
    @TatzzmTatzz 6 лет назад

    Hi I really need yr help were to connect the post wire I have a honda hrv 18' it probably the same please get back to me I really appreciate it thanks Dave

    • @DIYCarModz
      @DIYCarModz  6 лет назад

      Here is the instructions for the HRV: www.handa-accessories.com/hrv/doorsill.pdf

  • @ervinpegarido2255
    @ervinpegarido2255 Год назад

    Where did you connect the live wire?

    • @theeperfectimage50
      @theeperfectimage50 Год назад

      There is a pink and blue wire near the end of the video that he tapped into. Pink being positive(red) and blue being ground .

  • @chandulasliit8977
    @chandulasliit8977 9 лет назад

    those scuff lights fits with the Honda FIT 2011 model ?

    • @DIYCarModz
      @DIYCarModz  9 лет назад

      Chandula Sliit Yes, the exact same ones will fit your car.

  • @thusharadalugoda3934
    @thusharadalugoda3934 9 лет назад +9

    You did not talk about how to connect wires to the main line.

    • @DIYCarModz
      @DIYCarModz  9 лет назад +2

      Go to my youtube channel ruclips.net/user/diycarmodz and click the magnifying glass next to the "about" tab and search for "honda fit" there are many videos that shows you how to wire them up. ruclips.net/video/igFMlrqTV4U/видео.html

    • @mundzyrs
      @mundzyrs 8 лет назад

      +DIY: Car Modz : is it turned off when you close the door ? or it's stay on.

    • @DIYCarModz
      @DIYCarModz  8 лет назад

      It is on the same circuit/timer as the dome light.

    • @fernandocruz9243
      @fernandocruz9243 8 лет назад

      theodore, hi there, got my door sills for my rogue 2016, dont know where to connect them, so you're saying it is much easier to connect them on door switches? and will lite only the door you open right?thanks nando

    • @fernandocruz9243
      @fernandocruz9243 8 лет назад

      theodore, thanks for your reply ,yes,i see only one wire,i guess its a power, but how to or where should i connect the ground wire?

  • @abdulaj2711
    @abdulaj2711 7 лет назад

    can we connect this to door warning sensor that is situated on every door.?

    • @DIYCarModz
      @DIYCarModz  7 лет назад

      Yes, each door sensor will have 1 wire. You just connect that to the positive wire and ground the other wire.

    • @abdulaj2711
      @abdulaj2711 7 лет назад

      thanks mate.

  • @richarddean6318
    @richarddean6318 8 лет назад

    Hi, do you know how to install the wiring for the 2015 Fit? I can't seem to find any available slot.

    • @DIYCarModz
      @DIYCarModz  8 лет назад +1

      +Richard Dean ruclips.net/video/dH07Tce7sgE/видео.htmlm7s

    • @richarddean6318
      @richarddean6318 8 лет назад

      Thanks a lot..

  • @jackcshoot2605
    @jackcshoot2605 10 лет назад

    Where do i get the power supply? The fuse? Which fuse is it?

    • @DIYCarModz
      @DIYCarModz  10 лет назад

      check out his video: The wires are tapped to the dome light circuit.LED Door Sill power hookup Part 1

    • @hendrazhuo888
      @hendrazhuo888 7 лет назад

      DIY: Car Modz

  • @francisjosephsino405
    @francisjosephsino405 10 лет назад

    Hi where did you get that door sill i also have a honda fit, how much? Thank you

    • @DIYCarModz
      @DIYCarModz  10 лет назад

      eBay. search for Honda Fit door sill. It was around $50.

    • @ijacaraccessoriesijakudus4423
      @ijacaraccessoriesijakudus4423 8 лет назад

      +Francis Joseph Sino We sell car accessories. Please visit our youtube channel or website www.ijacc.com. Like our fb for daily promotion news: facebook.com/ijakudus

  • @Alves.t
    @Alves.t 7 лет назад

    Muito trabalhoso , gostaria de colocar no meu Golf 🙂

  • @wongpatan
    @wongpatan 7 лет назад

    where can i get this stuff? can u send me the link? thx

  • @Mr1998mike1998
    @Mr1998mike1998 8 лет назад

    Does it turn off when u close the door and on when u open

    • @DIYCarModz
      @DIYCarModz  8 лет назад

      Yes, I'll get you a video later tonight.

  • @nando2k289
    @nando2k289 8 лет назад

    Do you think these will work for the 2007 Fit Sport?

    • @DIYCarModz
      @DIYCarModz  8 лет назад

      +Fernando I'm not sure. The box says for GE8. which is not the 1st gen fit

  • @david61accord
    @david61accord 5 лет назад

    Did you get rid of your Accord?

    • @DIYCarModz
      @DIYCarModz  5 лет назад +1

      I have '13 Accord '12 Fit and '18 Civic

    • @david61accord
      @david61accord 5 лет назад

      @@DIYCarModz Wow! Good for you! You do a great job of explaining these DIY's for us plebeians! I just ordered door sill plates for my 2018 CRV and I fucked them up. No instructions. I installed them wrong. I may need to reach out to you as they need to be replaced!

  • @azizanwafie1689
    @azizanwafie1689 6 лет назад

    What carpet are you use

    • @DIYCarModz
      @DIYCarModz  6 лет назад

      I'm using weathertech digifloor mats up front and stock ones in the back seat and oem trunk liner

  • @hondafit3474
    @hondafit3474 10 лет назад

    Where did u get them??

    • @DIYCarModz
      @DIYCarModz  10 лет назад

      You can get them off of eBay. Just search for your car model and keyword "door sill led". Example.. Honda Fit Door Sill Led. I purchased mine from eBay seller: homegreatstore

    • @ijacaraccessoriesijakudus4423
      @ijacaraccessoriesijakudus4423 8 лет назад

      +HONDA FIT We sell car accessories. Please visit our youtube channel or website www.ijacc.com. Like our fb for daily promotion news: facebook.com/ijakudus

  • @mohamadzaki6784
    @mohamadzaki6784 Год назад

    pe benda la ko tunjuk ni..betul2 la tunjuk mcm ne nak sambung wire tu

  • @MyFoxworld
    @MyFoxworld 6 лет назад

    You went to a awful lot of trouble just to fit those, all you had to do was wire them to the door button that's in the door sill when you open it.

    • @kimlylagat
      @kimlylagat 6 лет назад

      Can u teach me master how?

    • @MK-Slinky
      @MK-Slinky 5 лет назад

      Sometimes the obvious solution is not always thought about until it's too late. I agree the door button would have been much quicker, it's the way I would do it.

    • @andrew21030
      @andrew21030 Год назад

      That works the opposite way round on mine, I've tried that place before

  • @Bernadett00000
    @Bernadett00000 9 лет назад

    _

  • @DIYCarModz
    @DIYCarModz  11 лет назад

    You can get them off of eBay. Just search for your car model and keyword "door sill led". Example.. Honda Fit Door Sill Led. I purchased mine from eBay seller: homegreatstore