🔧iPad Pro 11 Glass Only Replacement - 4K Complete guide🖥
HTML-код
- Опубликовано: 15 янв 2025
- My first time doing iPad and.. effect is brilliant 🥰
Welcome for my iPad Pro 11 inch ☺️
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜
MUSIC by emwu
➥➥➥bit.ly/2Qjb1QR
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Very impressive. I no longer feel like I could do my own repair! Thanks for clearing that up!
Hahahahaha
Basically you get strong fishing line a blow dryer do what he did goo gone the screen alcohol clean to perfection that’s all that lite is there for you could use a black light too the green is just brighter and the machine he puts it in is just a fancy dryer if you don’t have the money for a screen for east replace you ob don’t need that just let it dry naturally then glue the sides down and wellah but it looks time staking to me but it’s best to try for fifteen bucks befor spending two Hundo lol
I’m just a mom and started repairing my kids phones and iPads because I can’t afford new stuff and buy broken and because they break sh** a lot. If you have the right tools anyone can learn to do it. Not saying I haven’t hit challenges where I have had to pull my husband in on it to solder something for me because of water or an error on my part. Lol
@@ezswan3106tysm 😭
11:49 El primero que veo que tiene tanta dedicación en retirar las partículas, excelente, he visto algunos que ponen el vidrio encima de la pantalla cuando aun tienen particulas y sucios en pantalla. Excelente y muy limpio su trabajo, felicitaciones.
How much would you charge to replace the glass on two 11” iPad Pro’s? Do you have a mail-in service option?
Yeah, I'll just replace the entire screen after watching this. Thanks for the video!
is that an ultrasonic cleaner you are using? plz
Can you remove the glass and put the new one on without gluing it to the display? Thank you
what do you think of usisng automatic oca remove machine??
Very good video, what is the name and model of the machine you are using? I’m in UK and trying to get one
btw if you can , can you upload screen slicing technique video? .
how much thickness does 'slicing string' have which you use?
im using 0.03 mm and it is too week. it keep breaking
Lcd 0.8 or 0.6 oled screens can go thinner
Ważne pytanie czy Apple Pencil działa normalnie po takim zabiegu?
@@smiks23 jak dotyku się nie uszkodzi to działa. Ale zdarza się że po oddzieleniu szkła przestaje działać rysik częściowo i trzeba zmieniać również dotyk.
I need like written steps. What are you wiping the digitizer with? Also is there another layer of glass on the digitizer? Because normally on the older ones I wouldn’t be able to just be scrolling on it without messing it up
What two machines are those?
can you tell me what's the usage of the machines appeared on 12:47 , 13:12 ??
The first one is to laminate the screen and the second is to remove the bubbles I think
Bro ho mich does it cost just glass replacement for ipad pro 11 2021.......and screen replacement
No i to jest robota :) Mega . Leci łapka super :)
do you see any difference in ipad after changing screen?
No differences 😉
Jest możliwość robienia tego w stylu DIY? (W domu)
hi there ,,, Where could I buy a screen glass to fix my ipad pro 11,,, I got same problem,,, Thanks
Hi! Here You can 😉
bit.ly/3n0MUU8
what glue are you using there to seal the screen?
is it possible to use Loca for this? how you can see on my chanel?
It is possible BUT if any gets into the backlight it’s game over and I have tried and tried before I got my lamination machine and it always finds a way in plus it never fully cures and you will find liquid seeps into the backlight even if you remove it all in all it’s a nightmare!! Loca can be used on oled but it’s always better to use what was originally used and just use oca
Can you help me to write down the timeline to know what you are doing and using at the time in the video? Thank you! !
does it supports 120hz
Yes of course
Where do i buy the glass panel?
How much do you want for this job?
Nice job
Where can I get this done? I have an iPad Pro 11 inch 3rd gen with a broken glass, the lcd is fine though.
i will repair for u
hello what about Defoaming lamination machine?? It is also have `defoaming` but you still need defoaming machine??
Hi. My laminator doesn't have defoaming option. So this is why I need autoclave 😉
is bubble defoaming machine essencial?? i see somebody use that and others dont
It's necessary to use it. If not, bubbles will come back in a few days
@@JerryMobilePL oh...ok thank you very much sir!!
You can do that
My ipad pro just cracked too
Do i need a new screen or new glass
If everything is working just the glass is enough :)
We made this repair, we are in Poland 😁
on 5:08 . why do you need remove whole sensor's cable from backlight panel? why not just detach only sensor parts from broken glass??
Becouse to not break the sensor when new glass will be laminated 😉
@@JerryMobilePLicic in lamination, the led panel is pressed in oca machine?
@@sjb8178 whole display is pressed
@@JerryMobilePL thanks!
@@JerryMobilePL if we just dont remove the sensor and put them in the laminator, wil it be high chance that the sensor be broken? Because as I see, when removing the sensor, there is some part very hard to remove (black spots left behind caused by strong glue), that is also damaging the sensor cable, right?
how long time let display on hotplate to separating?
15-20minutes 😉
@@JerryMobilePL thanks i try my ipad pro 12.9
@@Aeh5oodeaQu I wish you good luck, be patient 😉
A voice over for the details would be great
Rate?
what temperature do you use when you slice glass?
100⁰c
Mi przy takiej wysokiej temp w autoklawie bable często wracają 😁 super robota
Do ekranu taka temperatura nie dociera, 10 minut to na to za krótko ale do wyciągnięcia bąbli w sam raz 😁
Hejka
Ile to kosztuje u was naprawić tylko szkło od ipad pro 11" ?
Hej. 8 stówek w przypadku tego modelu 😁
Guess I am totally out of luck if I got no tools like that to fix mine glass only WOW, min=ght be best to order the Digitizer kit you made this look way too easy, no heat gun and slithers at a time wow
BEAUTIFUL. 👉👉
Hello, can you tell me how much this repair would cost in your shop in zloty? I am based close to Poland and would pay for shipping :)
Hello, please message me on FB I will tell You all details 😉
What was your experience with this service? I was thinkin about sending my ipad too
moeth died rip 🙏
then laminator also has vacuum system like autoclave? i understand autoclave is vacuum with heating. if laminator also has vacuum system why they can't remove bubbles? becuz vacuum power has lower than autoclave?
Laminator generates vacuum inside. Autoclave generates big pressure inside, up to 8 bar. That's the difference 😉 autoclave needs compressor to work. Laminator needs vacuum pump to work. But my machine has built in vacuum pump.
@@JerryMobilePL oh shit...now i understood .laminator is vacuum and autoclave is pressure. i tot autoclave is also vacuum. now I solved the question!! big thanks bro!!!!!!!!!!
Plzz share ur information I have work
Please message on our facebook or Google page 😊
Super kanał i jeszcze te remixy When mom isn't home :D
Zastanawiam się nad zaryzykowaniem i próbą wymiany szybki z moim Mix 2S w domu, bez drogiego sprzętu (klej, linka molibdenowa, alkohol izopropylowy i cierpliwość). Jest ktoś oglądający ten kanał (lub autor) w stanie doradzić na co najlepiej będzie kleić? Klej UV, normalna płytka OCA, czy może jakiś inny płynny klej w stylu E8000 się nada?
Dzięki 😁 zależy co chcesz kleić haha
E8000 od razu mówię że tylko do klejenia ekranu z ramką się nadaje, nigdy w życiu klejenie lcd z szybą
@@JerryMobilePL no całe szczęście ze nie jestem w gorącej wodzie kąpany i nie próbowałem takich rzeczy, ale oglądaniu godzinami różnych poradników do tego wróciłem na ten kanał i znalazłem to czego szukałem na początku na przykładzie samsungow A40/50/70, więc jeszcze raz wielkie dzięki :) zastanawiam się jeszcze czy te plastry OCB czegoś potrzebują do wiązania (tak jak klej w płynie np 2500f potrzebuje UV - co zresztą jest dość praktyczne). Rozglądam się za tymi płytkami bo obecnie na Allegro nie da się dorwać 2500F nigdzie w dwucyfrowej cenie za dawkę na jedno użycie 😵 i zostałby mi tylko 1000N a to jednak podobno do mniejszych ekranów.
why don't you just put the oca glass + back panel into autoclave without laminating? what's the point of laminator if it can't remove bubbles?
Laminator is for laminating (pressing together lcd and glass), autoclave is for bubble removing. Without laminating it's impossible to remove bubbles. 70% of screen will be air
@@JerryMobilePL thank you very much
Which part he start to use laminator if i may ask
The pulsing in the video is like the camera is constantly seeking better focus (Panasonic?). Maybe better if you switch to manual focus for videos where you have fixed camera and subject positions -just a suggestion.
good work
He forgot the protective plate on the top connector.
Just replace the lcd and digitizer as one assembly.....cost more, but a better, easier repair....
emphasis on costs more 💀
Ipad 8 pleas 🤐
Da geht wohl nicht mit Magnet
if laminator is used only for pressing lcd and glass, why don't you just press it gently with your fingers or big book? you know, laminator is expensive. Do you need to pay that much only for pressing machine?
Yest, becouse it's needed vacuum inside. In normal atmosphere if has no sense
@@JerryMobilePL thanks
The head in the laminator is also heated to soften the OCA.
Vacuum inside the chamber is supposed to remove majority of the bubbles, longer you leave it, the less amount of bubbles you get, it only to a certain time point, and there's no extra benefit.
Debubbler will get out the smaller bubbles.
Wow, looks like a complete nightmare! And the special equipment. Apple doesn't want you to fix your own stuff, it's a huge part of their income.
This is also working without glass 😳😳 wtf
Far from complete. Commentary would be nice. 1990s techno makes me more frustrated
Music is a waste