Well, in all honesty, I had a cheap drill and used it for years. Never had a problem with it. Sure, it wasn't very powerful and overheated quite fast, but if you know that, and work around these problems, these drills will last quite some years.
It's a computer game term PvE - player versus environment (basically, the creatures in the game that were programmed to fight the player) PvP - player versus player (basically, the opponent can adjust and learn and do things differently from what a computer-controlled game opponent does. Many gamers prefer this mode because they like to know they won against another actual player, and it would usually be a tougher fight because of that..at least, when you meet another skilled player).
quite sure, because he removed the plastic stuff on the top, the hi spex got more air and a easier way to release its smoke and heat.... makes a difference. *looking at hot pc..*
Wranglerstar my grandfather had used them for a good long while and I still own his original set that he left to me in his tools when he passed at the beginning of this year. All of them work just fine especially with the new lithium batteries after 15 years of roofing. Not as good as my old stick battery makitas I bought a while ago from a older friend but they have been great dispite the abuse grandad put all of them through when roofing.
Hey, the Benchmark knife performed flawlessly.....as expected. Time to test the cheapest 4" folding knives on Amazon......maybe a $5 total investment for another 15 minutes of humorous fun.....albeit greedy, presumptuous, elitist fun. lol...
Haven't seen the video yet but going to make a bet that these are both better than the cordless drills at harbor freight. Also how dare you bash on ryobi, i had a $70(drill only, no battery) ryobi cordless hammer drill that i used for 3 years contracting, drilling holes in virtually everything you can imagine, wore out probably half a dozen bosch bluegranite masonry bits driling into tile and concrete walls for anchors and wall penetrations, shooting thousands of drywall screws and anchor screws, working in the rain, dropped off of ladders, and still using it around the garage. The only other drill i used was a big milwaukee if i needed to drill 1" wall penetrations through poured block concrete for larger cables. The guy i was subcontracting for and his other 2 subcontractors all used the same drill with similar results. Some of their products are hit or miss, but many are great.
.....It's a joke, maybe you should have read a little more. The drills at harbor freight are really really bad, hence why i said i would still bet on them being better than a harbor freight drill. The rest of my rant had nothing to do with the first "haven't seen the video yet" part and was actually typed while watching.
I learned something. That if you gonna buy the cheapest drill, it might be weak, it might be ugly and it might be bad but no matter the hate you will give it its still there to work
Testing the Cheapest Chainsaws on Amazon? Most of the cheap models come with starter kits including chains, gloves and tooling. You could compare all that stuff to the higher end brands. Maybe do a test to see which one fells a tree or cuts firewood easier or faster? These are really fun videos but maybe you should also make recommendations on how to improve or make the cheaper products better and last longer?
This video was obviously sponsored by DeWalt. He sold his soul to them. He really sank low this time... What a shame... I thought he had more spine than that...
I thought Ryobi was a pretty good brand, I've got 2 impact drivers 2 cordless similar to the one in the video and a battery circular saw and I use them pretty heavily and they work beautifully in my opinion anyways haha
with the "modern" Li-Ion battery drills there is no fun in such a test. Even the worst one would have higher torque, and the actual electronics controlling the motor you have in these would just shut off in an overload situation like the deathmatch. Only... well the Lithium batteries have a lot more potential for "fun" if damaged
Say what you want about Hi-Point (they are definitely heavy and ugly), but those MFs work. The yeet cannon actually managed to beat Glock in a mud test by both InRangeTV and TFB.
When I saw this video I was like, hmm I reckon I could get one cheaper so I went on to amazon and found one for $1.96 when it arrived it turned out to be a key ring....
There is a brand on Amazon called Prostormer. It looks like a decent brand, and the price points aren't super cheap, but definitely not expansive by any means. I have long thought about ordering them, but I wold love to see a review of some of their tools. They have an impact wrench, an impact drill, a smaller impact ratchet wrench, a regular drill, an angle grinder, and a circular saw. They all run off 20v batteries except for the ratchet wrench which is a removable 12v, and they are a mix of 4.0 amp 20v and 2.0 am 20v. Again, they look pretty decent, but I would love to see your review. Thanks brother!
ok so far at 5:55 the first thing I noticed is that the Hi-Spec was drilled so close to the knot in the board and the genesis was about 4 inches away....be fair bro
it doesnt matter where he drilled. it wasnt on the knot the stupid thing just didnt have power to keep going. what does it matter if the hispec barely ran after the match was over? are you two dumb kids who dont understand that a tool that under performs is useless no matter what?
since i would never consider either drill this video was for entertainment purposes only, which it did very well. i see you have other similar test, i will check them out.
How to disconnect a drill battery: Step one: grab the drill and hold it at 6 feet Step two: drop it! Step three: be made because you broke you dads drill
I just wanna say, thank you for inhaling dangerous fumes and smoke to bring us this video. Any time you could’ve stopped and grabbed a respirator or fan but didn’t cause you knew it wouldn’t be consistent and wouldn’t be a true test for you fans. Again. Thank you.
this was literally two years ago, but I'll put out my guess that both brands have a more expensive model with a two-speed switch and they just used the same casing for both their models?
6:02 I think it's pretty clear there are knots in the wood. Hard as a rock so next time don't drill right beside one. Pick the same spot for both drills.
@@dirttraxbiking Cause cheap tools suck, especially drills. The only cheap tool i would consider buying would be a floor jack, but i am not buying cheap jack stands, thats my life if those things fail
@@Aaron-wv1ww the prize usually stand for something, you pay for quality, but if you compare something you should at least make the test equal. I dont say cheap beats quality brands ☺ I work in the vehicle industry and even I can find some "quality brands" that "suck" I just hope ppl pay for the stuff that suits their need, but it's always fun to see a brand hard-core test against another
R.D. K people like you are ruining this channel. Cody makes the content that let's him continue making videos for free for everyone to watch. You really have no place to complain about the content you're getting for free and choose to watch.
Best cordless drill I have ever had (and still use to this day ) is the Hyper tough from Wal-mart. $20, I have 2 and use them daily for work. I do maintenance and remodeling. They have out performed and outlasted any other drill I have used including my old craftsman.
How to deal with a burning drill.
Step one: Smack it with a shovel.
Step two: Throw it with a shovel.
Step three: Bury it.
Step 1.5: Miss the open topped bucket of highly combustible used oil next to the doorway.
Well, it was actually the best way to deal with it. Except for removing the battery of course, but that's not a great idea while it's on fire
I was just making a joke. It's just kinda funny to see him out of frame doing it.
CHERRYINTHESKY 1932 sounds like my broth....WHAT I SAID NOTHING
Step 4:nuke it!
“Ok I have my fire extinguisher ready”
“ THE GENESIS IS ON FIRE!”
*hits with shovel*
Because someone already commented the exact same comment as yours and already had 1k likes
😂😝👍
hahahahw
i mean, it can explode and you might want it to explode not near the garage full of wood
Shovel: Ultimate fire extinguisher
8:15 "Got my Fire extinguishers ready"
13:32 *Grabs a Shovel*...
MrWalker8800 the extinguisher Is for a huge emergency, they are expensive. He used the shovel and dirt because it wasn't out of hand
They ain't THAT expensive... portable ones are like 15-20€ :/
But i see your point...
Many of the cheaper portable ones are not suitable for electrical fires of any kind. Not all fire extinguishers are equal.
Then why even have one in a car at all?! ._.
I did say *many*, not all :) It's just a matter of buying the right one, by carefully looking at what it's rated/certified for.
That Genesis drill was actually pretty impressive for $32. I wish he would’ve mentioned whether they had lithium or nickel metal hydride batteries.
Not lithium!
NaCl battery.
Yeah lithium is expensive
Welcome to wranglerstar where saftey is number 99 priority.
Kid Nevik hes got 99 problems but safety aint 1
About 50 places higher then i put it.
lmao!!
Lol
Kid Nevik yes...so true
"It under-performed in catching fire." That made my day.
der Schäfer mine too
Haha, and mine, classic !
@7:25 Hi spec sounds better after 6 ft drop on concrete lol
Haha that's last drop and sarcastic " I know how to take the battery out on this one" really cracked me up
"We know how to get the battery out of this one."
*DROPS*
hahaha
"i have my fire extinguisher ready"
-drill is on fire
-runs to a barn getting a shovel
You know the drill.
But do u know the skrewdriver
Charlie H screwdriver*
Zemer e hapure
Saturday Projects do you know wrench
LOL
10:40 hi spec quit smoking, but genesis started vaping xD
Lmao
😂
11:18 "the hi-poi... Uh hi-spec is uhh"
Dude just called it the Hi-point of drills lmao. Savage.
12:29
Lol
Thunderdome: Two drills enter; one drill leaves.
halnywiatr 🔥 on fire...😂
Would be more appropriate to call it "Thunderspin"?
actually two drills enter and neither leave
It's my knife and I can do what I want with it.
Absolutely!
Later that day they found a body with stab wounds.
Anthony Young only reason y i went to the comments
You call that a knife?
muh1h1 no... this is a knife..
why i am watching this at 1 am when i have class tomorrow morning
cardmaster971
Copy paste much? 😂
OMG same lol
cardmaster971 same 😂😂
cardmaster971 egsakly
cardmaster971 I'm also watching at 1 am xD
Well, in all honesty, I had a cheap drill and used it for years. Never had a problem with it. Sure, it wasn't very powerful and overheated quite fast, but if you know that, and work around these problems, these drills will last quite some years.
Watching him choke on burning drill fumes is the most premium content I've seen in a minute
Is this a youtube channel for dads?
8:18
Roman Florusse thxz
Roman Florusse thanks
thanks bruh
Roman Florusse i
Roman Florusse thant you man sub me i sub you
Why is this so damn entertaining?
I honestly can't stop watching... I'm learning something important about humanity right now! 😎👍
Barnacules Nerdgasm Oh hey there Barns
man of culture
It's because it gives a good nerdgasm.
Didn't expect to see you here
Oh, thats where payday gang buys their drills from
Ryan Hawkin XD true or they just pull a hiest at the drill factory
AHAHHAHA
Ryan Hawkin omfg
They gotta cut corners considering how many heists they fail, all that money spent on lost equipment and jail breaks smh.
Ryan Hawkin LMFAOOOO
Genesis for Pve
Hi spec for Pvp
godly04 Love this comment
What that?
godly04 why aren't there more up votes on this golden comment?!
It's a computer game term
PvE - player versus environment (basically, the creatures in the game that were programmed to fight the player)
PvP - player versus player (basically, the opponent can adjust and learn and do things differently from what a computer-controlled game opponent does. Many gamers prefer this mode because they like to know they won against another actual player, and it would usually be a tougher fight because of that..at least, when you meet another skilled player).
Did I seriously just see a gamer comment on a tool page XD! Days made (fellow gamer)
Lol they touched tips
ice jj fish tank sausage party 🎉
Luso 🎁
Luso 🌭🌭🌭🌭🌭🌭
🍌🍆
ice jj fish tank sausage party
"I wonder if some of it's high specifications have come loose"
LOL
Why am I more interested in this "fight" than the mcgregor mayweather fight lol
Cade Lucero you are hilarious! cool name too!
McGregor loss was a inside job.
Pmsl 😂😂😂😂😂😂it was a lot longer lol
7:54 *"That has a light"*
“good grief these things are dangerous” he says after drilling them together for the past 3 or 4 minutes
"Does everything bad, including dying"
Ultimate insult right there. I might put a derivative of that in my roasting toolbox.
😂
"He did everything wrong, including dying" 😂😂😂
quite sure, because he removed the plastic stuff on the top, the hi spex got more air and a easier way to release its smoke and heat....
makes a difference.
*looking at hot pc..*
Victor Porto 😂😂😂😂
I felt like he was talking about me
i dont use drills why am i watching this
Serph Varna what you use your hands?
Cause it's fun
Because science
me to dont know y am watching
i think coz its fun
Because you should be.
that fire was the best part of the whole video
aoxilus obviously Computer Generated Images
Soulsreaper the left wrist getting detroyed was at 8:18
I agree, it was staged for sure
indeed!
And so on the seventh day, he created fire
Lessons learned: never leave the battery in a broken device!
Wait rly?
Jh
Stihl vs. Husqavarna chainsaw torture test?
Tom'sView Photography This would be awesome to see. German vs Swedish engineering
Tom'sView Photography both of them will last for years. No need for that test.
Wyatt R Not to be weird, but what's your last name?
Roy ?
Wyatt Rowe Rowe
The Hi-Speck isn't so high anymore bc it quit smoking
JAMONJACK13 M Pls no
🤣🤣🤣
Keith Kinney BB. Ändröojczgln
JAMONJACK13 M
Nobody likes a quitter! 😧
Lol 😆
The hi spec doesn't want cancer
Next you should test amazons cheapest chainsaw or jack
You know, you kinda gave the Hi-Spec another cooling vent, maybe that's why it won 🤷🏽♂️
"The genesis is making an audible sound"
Isn't that what sound is?!
ElDantae well, actually There are some sounds we can't hear
he means the motor isnt making rotary sounds. but it doesnt roll off the tongue very well in mid conversation with his video camera...
Rafael Henrique thank you for your reply!! Your right, those sounds are called inaudible....
Joshua Edwards ha haaa yeah man!!
lmao😂
You seem to have a problem with ryobi so why don't you test them on the channel to see if they are as bad as you think
Ok I will,
Wranglerstar I look forward to seeing it
Wranglerstar my grandfather had used them for a good long while and I still own his original set that he left to me in his tools when he passed at the beginning of this year. All of them work just fine especially with the new lithium batteries after 15 years of roofing. Not as good as my old stick battery makitas I bought a while ago from a older friend but they have been great dispite the abuse grandad put all of them through when roofing.
Probably too expensive to buy just to destroy? I'm sure if you send him one, he will be glad to test it.
Hey, the Benchmark knife performed flawlessly.....as expected. Time to test the cheapest 4" folding knives on Amazon......maybe a $5 total investment for another 15 minutes of humorous fun.....albeit greedy, presumptuous, elitist fun. lol...
gennesis does what hi spec don't
You can't do this on hi-spec
Yeah, catches fire
Sega jokes
13:32 genesis:"why are we still here?just to suffer?everyday,i can't feel my legs,even my fingers."
You got me when you said I know how to take the battery out of this one and then dropped it
Hahaha yep!
Haven't seen the video yet but going to make a bet that these are both better than the cordless drills at harbor freight. Also how dare you bash on ryobi, i had a $70(drill only, no battery) ryobi cordless hammer drill that i used for 3 years contracting, drilling holes in virtually everything you can imagine, wore out probably half a dozen bosch bluegranite masonry bits driling into tile and concrete walls for anchors and wall penetrations, shooting thousands of drywall screws and anchor screws, working in the rain, dropped off of ladders, and still using it around the garage. The only other drill i used was a big milwaukee if i needed to drill 1" wall penetrations through poured block concrete for larger cables. The guy i was subcontracting for and his other 2 subcontractors all used the same drill with similar results. Some of their products are hit or miss, but many are great.
.....It's a joke, maybe you should have read a little more. The drills at harbor freight are really really bad, hence why i said i would still bet on them being better than a harbor freight drill. The rest of my rant had nothing to do with the first "haven't seen the video yet" part and was actually typed while watching.
8:19 repeat it again and again and you will laugh
....huhjfct6uviyfgvbyouijk damnit XD
KanShooth Same with 13:33.
better yet turn slo mo on
KanShooth you freak 😂
“It just kinda did everything badly including dying” 😂😂
I learned something.
That if you gonna buy the cheapest drill, it might be weak, it might be ugly and it might be bad but
no matter the hate you will give it its still there to work
I was laughing so hard “THE GENESIS IS ON FIRE **grabs shovel** *BOOM* I SHOULDVE TAKEN THE BATTERY OUT”
😂😂😂😂😂😂😂
HOLYCRAP70 i like da name
When you started dismantling them with a pocket knife, before even starting any tests, I knew things were already going south fast! 😂
Your videos are incredibly entertaining. You have a very natural camera presence. Glad to see some genuine entertainment on RUclips.
Fight at 8:20. You’re welcome
Testing the Cheapest Chainsaws on Amazon? Most of the cheap models come with starter kits including chains, gloves and tooling. You could compare all that stuff to the higher end brands. Maybe do a test to see which one fells a tree or cuts firewood easier or faster? These are really fun videos but maybe you should also make recommendations on how to improve or make the cheaper products better and last longer?
ChannelX24 the best thing for the cheap China junk , don't even open the box , just toss it in the trash can
ChannelX24 I will pay good money to see how the equivalent death match plays out...
This video was obviously sponsored by DeWalt. He sold his soul to them. He really sank low this time... What a shame... I thought he had more spine than that...
ChannelX24 exactly
"Is that related to Hi-Point?" lol
Probably..
Only If matt from demolitionranch would see this comment
Ugly as hell but runs like a mule I'd say yeah
Looks like it 🤣🤣
@@kamorus5317 Demo Wrench actually lol
Yesterday people dropped mics but that is now a thing of the past, todaywe drop the drill LIKE A REAL MAN
13:33 I'm rolling on the floor laughing
Metaphysicalkid Gaming u
Metaphysicalkid Gaming ill join u 😂😂😂
"good grief" xD
The way it spun flying through the air was hilarious.
13:31 YOU PICKED THE WRONG BARN FOOL!
"I know how to get the battery out of this one"
Killed me haha
“Is it going to be a fire”
Said while holding with bare hands
I thought Ryobi was a pretty good brand, I've got 2 impact drivers 2 cordless similar to the one in the video and a battery circular saw and I use them pretty heavily and they work beautifully in my opinion anyways haha
13:51 (Good grief those things are dangerous!) After he did everything to them that you're not supposed to LMFAO!
try the same test with an expensive drills
with the "modern" Li-Ion battery drills there is no fun in such a test.
Even the worst one would have higher torque, and the actual electronics controlling the motor you have in these would just shut off in an overload situation like the deathmatch.
Only... well the Lithium batteries have a lot more potential for "fun" if damaged
Abdulazziz Aldosari he did it already
Pittsburgh Rules your responding to this 10 months after he posted this comment
"i wonder if its related to the hipoint" lmfao i love this guy for that
Say what you want about Hi-Point (they are definitely heavy and ugly), but those MFs work. The yeet cannon actually managed to beat Glock in a mud test by both InRangeTV and TFB.
i would imagine that the magnetic "bit holder" is actually a magnetic nail/screw holder. at least, that's what i'd use it for
Lou Ciamillo. Yeah, that's what it is, it's not made for bits.
Cheapest car jack, chainsaw, circular saw,
AJ9 definitely looking forward to the chainsaw death match
Now all Cody needs to do it kill a circular saw vs an impact driver, while the impact driver is being cut with a chainsaw.
you should test some handguns like this..barrel to barrel then just keep pulling the trigger....haha
LOL!
AdamShumpisxXx r/wooosh
AdamShumpisxXx right over the head
Yes!!! You made me spit up my snack.
no.
Cody, you ARE the boss at these videos! Love them 💙 Thank you!
When I saw this video I was like, hmm I reckon I could get one cheaper so I went on to amazon and found one for $1.96 when it arrived it turned out to be a key ring....
Jay Jose got em
My teacher, did you do your homework?
Me at home: 13:34
Xd
There is a brand on Amazon called Prostormer. It looks like a decent brand, and the price points aren't super cheap, but definitely not expansive by any means. I have long thought about ordering them, but I wold love to see a review of some of their tools. They have an impact wrench, an impact drill, a smaller impact ratchet wrench, a regular drill, an angle grinder, and a circular saw. They all run off 20v batteries except for the ratchet wrench which is a removable 12v, and they are a mix of 4.0 amp 20v and 2.0 am 20v. Again, they look pretty decent, but I would love to see your review. Thanks brother!
9:31 *"UGH HOW MUCH MORE ABUSE CAN* MY LUNGS *TAKE"*
*stabs someone with a knife*
“It’s my knife I can do what I want with it”
We learned to buy dewalts, Milwaukees and makitas
Makita camp here!
Buy a rigid Lifetime warranty Even on the batteries.
Festool and hilti!! Everything els is shit😅
bosch and black and decker are better you morons
darren Korbry in 1980 they were, i dont like the comment you left. If you want to say something like that, go somewhere else
ok so far at 5:55 the first thing I noticed is that the Hi-Spec was drilled so close to the knot in the board and the genesis was about 4 inches away....be fair bro
lilfear Noticed the same thing. Not a fair comparison. Even a dewalt would have a hard time drilling that close to a knot.
And how the winner of the last challenge can be the looser? The hispec was going and the other catch fire...blaaaah he said genesis was better.BS
Felix Berdecia the hi-spec died long before the other one?
Lmao crying over drills omega lol
it doesnt matter where he drilled. it wasnt on the knot the stupid thing just didnt have power to keep going. what does it matter if the hispec barely ran after the match was over? are you two dumb kids who dont understand that a tool that under performs is useless no matter what?
Scientist: you can't smell from video.
Wranglestar: 8:56
Loving this channel, I would love to see how the cheapest fire extinguisher does in you tests compared to a quality one.
I wanted to see the Genesis' case.
Bartman t
since i would never consider either drill this video was for entertainment purposes only, which it did very well. i see you have other similar test, i will check them out.
I don't know why you keep ending up in my recommended list, but I could watch you talk about paint drying for 30 minutes. I'm subbing this channel.
my school has the hi spec one it makes woodshop class hell
Our school has the newest milwaukee m18s that cost like 700 they are really good
In my country there hasn't been woodshop class in living memory.
How to disconnect a drill battery:
Step one: grab the drill and hold it at 6 feet
Step two: drop it!
Step three: be made because you broke you dads drill
"I wonder if that's related to the hi point" I nearly died man!
I just wanna say, thank you for inhaling dangerous fumes and smoke to bring us this video. Any time you could’ve stopped and grabbed a respirator or fan but didn’t cause you knew it wouldn’t be consistent and wouldn’t be a true test for you fans. Again. Thank you.
Why did he cut the video? Did he light the genesis on fire?
Daniel DeJesus he did. So he could get a video of him running towards it
He left and came back
That was my first thought...light it up and walk out so you can get a dramatic run-in-and-put-out-the-raging-drill-fire shot.
He did indeed
13:08 lmao that pause
I was actually blowing my screen to clear the smoke :0)
No you weren’t lmao
You was trying to blow the smoke into his face! >:(
lmao
Fire extinguishers: Created In 1818
People before 1818: 13:33
Korma spice rice advert
8:06 high quality entertainment
this was literally two years ago, but I'll put out my guess that both brands have a more expensive model with a two-speed switch and they just used the same casing for both their models?
I thought exactly the same lol
13:50 Good Grief! "These things" are dangerous! :D I don't think that was their primary purpose! lol
I laughed so hard when he said that
It’s 2:40 am and I’m up watching a video about drills and I’m entertained 😂😂
The manufacturer hopes you don't recognize it's the same plastic molding from your expensive drills.
$32 dollars...and 17 cents...ahhahagahahah
QuirkyToaster
"Good grief these things are dangerous!" Nah... what you did IS dangerous.
Never used a drill in my life but still watched the full video good job at entertaining viewers and great content
He set it on fire
Hi from Germany. This test was quite useless and didn't make any big sense. But it was funny. Please do more such tests 😁
0:01 there is a cat right side under that wooden structure....! Awwww....😍 lol
So calm sound, i subscribe instantly.
6:02 I think it's pretty clear there are knots in the wood. Hard as a rock so next time don't drill right beside one. Pick the same spot for both drills.
He does this every time, he don't want the cheap to be good, he makes it look worse than it is, he's not very open-minded.
@@dirttraxbiking Cause cheap tools suck, especially drills. The only cheap tool i would consider buying would be a floor jack, but i am not buying cheap jack stands, thats my life if those things fail
@@Aaron-wv1ww the prize usually stand for something, you pay for quality, but if you compare something you should at least make the test equal. I dont say cheap beats quality brands ☺
I work in the vehicle industry and even I can find some "quality brands" that "suck"
I just hope ppl pay for the stuff that suits their need, but it's always fun to see a brand hard-core test against another
Please do the cheapest the cheapest impact wrench.
Steven P he's already done it last week
It's people like you that are ruining this channel. Stop asking for meaningless content. there's plenty of that out there already
R.D. K people like you are ruining this channel. Cody makes the content that let's him continue making videos for free for everyone to watch. You really have no place to complain about the content you're getting for free and choose to watch.
r.d.k you are ruining this channel by bashing others ideas, what do u want him to do that is beter for the audience then tool testing???
If I buy a wrench at Harbor freight and throw it against a wall...would that be an impact wrench
Best cordless drill I have ever had (and still use to this day ) is the Hyper tough from Wal-mart. $20, I have 2 and use them daily for work. I do maintenance and remodeling. They have out performed and outlasted any other drill I have used including my old craftsman.