OEM + Turbo S2000 ? 400+ WHP
HTML-код
- Опубликовано: 27 авг 2024
- I spent pretty much a full day driving the S2000 to see what I like and don't like about it.
It is actually pretty close to a Honda Performance type build.
It's very well balanced and drives nice, it's very quiet and have plenty of power. The overall feel is 95%.
The turbo kit is very good and has lots of mid range useable power. I don't think we're going to produce it as it doesn't really have a place. It makes 400ish at around 13 psi.
I do have plans to build and design another turbo kit and use our car to build and test it on this car, so look out for it when time permits.
Video of the wheels:
• MS-10 Wheels installed...
Wheels specs:
Front 17 x 8 + 53
Back 17 X 9 + 63
![FNAF Into the Pit has A LOT of Unused Graphics | LOST BITS [TetraBitGaming]](http://i.ytimg.com/vi/6YhZCRdipl4/mqdefault.jpg)
You should have a million subscribers. Your quality and hard work ethic shows. Thank you!
You guys should definitely make this turbo kit and sell it.. the OEM plus feel and look is great.. i feel this kit will have no heating probleme at all on the engine bay..
This is the perfect s2000. Clean and simple and turbo!
OEM+ is just the perfect description for everything you guys do 👍👍.
Wow that paint match is amazing! Only thing I would add to the mods for OEM+ are Honda Acess S2000 premium floor mats and some color matched side strakes!
The perfect build IMO! Great content as always.
This is one of the best builds I've seen for an S2000. Similar to how I'd do it. I don't see myself making a car too powerful for its chassis.
Almost 1st! Love your work John and LHT!! 2000 S2000 API!
Nice mods, looks really good I love the OEM Plus style.
Man I wish I would have seen this wheel company when I had my AP2. I love their OEM+ models.
We wondering about the air box, this is the best build i’ve seen. it’s just super clean. I’m gonna want this done to mine. Good job man!!!
How has this channel not made it to 100k yet? One of the most underrated channels
When you said the "hardtop tends to stay there" you must have been looking at my life the past 5 years, 🤣. I just removed the hardtop because this year I told my self if would enjoy an open top again, lol!
Lol. Yep.
Wow John your the man, I was supposed to contact you about a supercharger on my AP2 since you pretty much can do superchargers with your eyes closed, now I’m breaking my head about a turbo 😂. Great video. Thanks.
Those wheels are so nice good sir
Beautiful build 🙌🏻
I am saving money to send my beautiful GPW S2K down there! It could be a couple of years but it will happen! From the PNW LOL
Love the build. I know this is quite out of left filed but I always thought a gated shifter in a s2k would be so cool. The gearbox is fantastic but feel the gate would really make it next level.
Wow 😲 that’s a dream car 🚘. Great work 👍
Great content
You need more subs for sure
Keep grinding
Love what you guys do! The stock airbox to me is the icing on the cake! Will this be a setup that we can get also?
Sure.
Looks amazing man awesome build. I need a front lip some day.
Awesome build!
Lod exhast is always good. Thats why you get one with a valave to make quiet when you must
I can't wait to buy one of these off you!
Thanks so much for your review
Car looks awesome. Drop does improve the look imo!
Very nice!
Beautiful car
Love the Mugen replica wheels. They are one of my favorite wheels. Wish Mita made them in 4x100. I know Rota make some that are similar in 4x100
Looks clean 🔥
Wanted to see the green s2k in the thumbnail :( good video though!
I do like it in green.
Would love to buy exhaust and turbo set up from you... everything that's needed... this week!!
Awesome
Wow nice. Yes I love the s2k in stock form. I a huge turbo guy so thats what I want to do at one point. Mine is a 2005 S2000 all stock. Yes I love the quite exhaust
Hey John love the set up, can you please tell me what size tires are you using? Car looks great
Did doing the split cat after the 3” down pipe help with air flow restriction?
I hope to bring my s2000 to you one day soon
#LHTPERFECTION
What are the specs of the wheels you're running? I'm wanting something I don't have to roll/pull fenders.
*Edit - 17x8 +53, 17x9 +63
No modifications needed. I don’t like rolling fenders.
@@LHTPerformance What are the specs? The wheels are available in many sizes and offsets.
@@crxseth I don’t remember. I put it in one the earlier videos when they came
@@LHTPerformance Thanks. They are 17x8 +53, and 17x9 +63.
@@crxseth Thanks Seth. I was going to post them in the description
S2000 is still a great value; even at current pricing.
Prices have actually dropped since the 2021. Now is definitely the time to get one.
@z32luvr they're still mid 20k around me, same price as a nice 2018 mx-5
I think this might be the last good time to buy one. I’ve owned and watched S2000s since the beginning and seen the pricing fluctuate. As cara become more lame , electric, auto and self driving, tue desire for a true affordable sports car will still in demand.
@@Criam The MX5 is cool, but you cannot compare these cars. Honda is always a better engineered car.
Love it!
How much is the turbo kit + labor to install? I live in FL as well as
Just graduated… trynna get my cpa… to make enough money to buy a car from y’all lol
Will this be suitable for Right hand drive?
I love this car too John! ❤
New to the channel, from a recommendation by @KG Garage, another honest, detailed and informative channel. Check ‘em out, everybody!
Ya’all have vids on Honda S2000s (my dream car).. “you had me at Honda”. I also took a glance at your other content and I’m all in! I can’t wait to to see all your other builds.
I love it, great job. Beautiful execution. I really want a pair of those red seatbelts. Can you get them still?
Yes. We only offer them if we’re doing a build.
Hi John the s2000 looks amazing with the wheel setup. If you don’t mind me asking where did you get it aligned at? Looking to get my s2000 aligned just don’t know where to get it i am in Tampa.
I had it done Goins garage on 54th avenue in Kenneth city
Great build!👍 At what point do you suggest going to larger calipers? Also, would you be able to make that full exhaust set up for a customer who wants a little more sound, but no drone?
Sure. We can build any exhaust you dream. Stock calipers are fine, just add brake scoops for additional needs.
why did adjusting the height slightly makes it looks so much better...
Do you know whichh seat rails would be fit in the s2k, if i want install my recaro spj/is2000 into it?
I think Corbeau make a seat rail to fit the S2000. And it should be close enough to fit the Recaro seat.
How much for this complete build?
John you should develop a AWD conversion kit for the FK8 civic type r.
Love it....where are the LHT goodies??? Vtec solenoid cover, battery tie down etc
It hasn’t been finished yet. Right now those parts are selling as fast at they get made, my car comes second to customers.
Love this project. Great video!!! How much would it cost to do a turbo build like that?
Message me.
So does the exhaust essentially have three mufflers? Any cats?
You can see a few videos in the series and see some different cats we used and the exhaust configuration
Did you have to roll your fenders to run 255s? I have MITA V3s and they recommended 245s to avoid rubbing. I'd like to go to 255s so I can run Cup 240s.
No rolling fenders, no rubbing. 225 front and 255 rear. Staggered set up
What turbo and manifold is it running?
@@zVlPERz We customer built a shorty manifold and the turbo is a GT25-660
🔥🔥🔥🔥
John, How much for this exact build on my 03 AP1 ? I’d like to have this done
Were those lower seat rails as low as you think the OEM seat can be? I too have the tall guy small car situation but have always been hesitant to rolling the dice on a different seat. Always found that aftermarket seats always have fitment issues that need to be worked out.
The lower seat rail puts the seat, almost dragon, the carpet, without modifying the pan any further I don’t think The seat could go lower. I haven’t seen an aftermarket see that fits the car and myself Internet to thousand, so I couldn’t see which one to look at.
@@LHTPerformance Thank you for the response. Knowing the seat is touching the carpet is great info. Probably going to go the same route with the lowered seat rails.
Would love to you work on some Type Rs
😉
I enjoy your builds and style with you and kg garage would do a build together
At 3:20 the center console is all black like my car. I’ve seen ones that are silver. Is there a way to buy the silber bits and install them on my car?
Silver = '04 '05. Black ='06 and beyond. Older parts will bolt on
What size turbo do you have in the red S2000? Thanks!
G25-660
Where'd you get the red seat belt?
Try out jrz rs pro coilovers. It'll be the ultimate driving machine. Day and night difference.
how does a dyno tune help a car. What is the function/purpose of a dyno tune?
The dyno is a tool allowing the car to be in a safe state and repeatable runs.
how much does the build cost?
Put the link In the description and the specs of the wheels you have would be appreciated.
The video with all the wheel
Specs are in the description.
@@LHTPerformance thank you. If it was there already I didn’t notice. But see it now. Thanks for the awesome contribution they have some cool wheels.
how much is a muffler system with the flap at the back to keep it quite
IT’s explained in past videos
Do you have any videos about installing the CR wing
I bought a CR trunk. You just bolt it on. It’s about as simple as can be.
So the Mita wheels fit without any fender modifications?
Yes. They are on my car and I have zero fender rolling.
What's a clutch job with OE style clutch package? Emailed a while back but didn't hear back
A complete oem kit with install kit $1695 installed.
@@LHTPerformance what if you do install? I'm in TN, so probably not logistically what I would do, but just checking
@@naturalsr405 That’s the complete kit including install.
@@LHTPerformance oh fantastic, thanks! Totally misread your reply. Looks like I need to make a road trip ;)
@@naturalsr405 We do about 5 a month in average.
What wheel specs did you with here?
The specs are in the description
Did you get the steering wheel redone? It’s nice.
Yes. I posted about it earlier in the series. I really like it.
What's the wheel spec?
👏🙌
Would you sale that one? How much?
Which lug nuts are those? They look nice!
They come with the MITA wheels
The s2000 is the best, John! Mine is for Sale 😂
Lol. I’m keeping the car, I have plans for different set ups as I continue to experiment
@@LHTPerformance keep it up! We all want to see what’s next!
What’s the not for sale price? Hahahaha
@@adamk1413 a million dollars 💰😂
Whoa what valved muffler is that
We built the exhaust using Ticon Titanium, the the first exhaust is full 3” down the passenger side and a branch with 2.5” out the drivers side with a boost activated valve.
Would look trick with some side strakes 😏
What color code green is that????
I tweaked it in the software until it looked good. Lol.
@@LHTPerformance 🤣🤣🤣🤣🤣
Thought I was gonna see a booger green s2k lol Everything is perfect .
Love everything except the rims 😊 #defendauthenticity
Hashtag can’t get real Mugens, can’t get them this wide, I love the wheels either way while I type on a Chinese phone.
i thought for a sec you were planning to sell the car lol
I’m keeping this one
2 row radiator would be better, turbo = more heat and wear & tear .
This is temporary for the oem look. I’m actually very familiar with cooling updates 😉
incoming for sale post 📫
No
Would love to see an S2000 in midori green and samba green del sol color. Very nice job. Wish i could bring my em1 to you guys.
Very nice!
Hello, is this turbo kit will be developed for sale?
After building it and adding up parts and time involved it will be very limited. We don’t like to farm things over seas and we don’t have a production facility
I bet, its a beautiful kit and well put together, Im trying to resurrect a flooded s2k and after I get it running im debating between turbo or supercharged, looking for a fun driver nothing crazy, I share your mentality on not over powering or super loud
Seems like the closet thing to this kit would be the SoS ts-max turbo kit