Replacing valve springs| 4.8 5.3 6.0 LS1/lS6 | detailed close up
HTML-код
- Опубликовано: 1 апр 2019
- Gbody merch!🎁
linktr.ee/phrostees
LS1/LS6 heads
4.8 5.3 6.0 vortec
*will not work on
LS2 LS3 LSA L92 with out modifying tool*
Valve spring compressor tool - www.summitracing.com/parts/PR...
Flex air valve holder tool - www.jegs.com/i/JEGS/555/W8400...
Thank you so much for the detailed vid! I have to replace the rocker arms on my 6.0, but it's almost at 250k so I figured I'd replace the springs as well. Couldn't figure out what the hell "Valve spring retainer keepers" were until I watched this. Cheers!
Glad it helped thanks for watching !
Thank you! Short, concise and to the point! Very helpful video.
Thanks for watching!
Great video. Thank you
Thanks!
Hey was using this method with air compressor and I took the off and hook the tip back up and a lot of like moisture came out is that fine or no
If the exhaust springs aren't compressing at all then that means the valve itself is stuck a little open? Looked closed have the heads off
mines broke, i dont see the part in the middle
Do u have to have the head off or can u do this with it still on the motor
Heads are still on you can do this without removing the heads
So just do the same thing do I need to pressure the valves or just slap in like the vid will the valves not fall through
How
shy guy,haha not much to say,not a big talker huh,yea me either,well at least not on camera i think i sound horrible lol thanks for the video smiley.laterz
What is this tool called
ls valve spring compressor tool